INSTRUCTION SHEET FOR 35815C COMPRESSOR SERVICE KIT
THIS KIT CONT AINS TWO NEW ITEMS FOR THIS COMPRESSOR.
- A NEW RELA Y (P/N 30681C) WHICH DOES NOT HA VE THE 1/4" CONNNECT OR FOR THE
COMMON COMPRESSOR TERMINAL AND A RED WIRE (P/N 36014C) WITH A PIN CONNECT OR
FOR THE COMMON TERMINAL.
- THE RED WIRE SHOULD BE USED TO REPLACE THE HOT SIDE OF THE POWER
CORD BETWEEN THE COLD CONTROL AND THE COMPRESSOR COMMON PIN. A
PIGGY BACK CONNECTOR IS PROVIDED FOR CONNECTING THE FAN LEAD. IF YOUR
COOLER IS NOT F AN COOLED THE EXTRA 1/4" TERMINAL SHOULD BE REMOVED.
- IF THIS COMPRESSOR IS AN EXACT REPLACEMENT FOR YOUR OLD ONE AND YOUR
OLD RELA Y IS IN GOOD CONDITION IT MAY BE USED IN PLACE OF THE NEW RELAY
AND RED WIRE.
WIRING DIAGRAM
PRINTED IN U.S.A.
FOR PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR CALL 1.800.323.0620
97597C (Rev. SI- 1/05)