ELK 965, 965B20 Specsheet

Low Battery Cutoff & Master Power Switch

ELK-965

The ELK-965 is a Low Battery Cutoff Module
combined with a Master Power Switch. It is
designed to work with virtually any 12 Volt D.C.
control panel or power supply. In the event of an
extended power outage, the ELK-965 sensing
circuit automatically disconnects the battery when
the voltage falls below 10 Volts DC. This helps
to prevent “deep discharging” of the battery. The
convenient power switch permits the installer or
user to easily disconnect both the Battery and the
AC power from the control or power supply.

Features

• Works With Any 12 Volt D.C. Control Panel.

• Automatic Low Battery Cutoff Protects Battery From Deep Discharge.

• AC and Battery On / Off Power Switch.

• Visual LED Power Indicator.

• Installer Friendly - Small Compact Size.

• Includes AC Wires & Battery Leads.

• Fits Standard Snap Track.

• Includes Double Sided Mounting Tape.

• Lifetime Limited Warranty.

• Available in 20 piece bulk pack - 965-B20.

Specications

• Relay Contacts: Form “C”, 7 Amp @ 28 VDC.

• On / Off Power Switch: DPDT Slide Type.

• AC Power Leads: 18 AWG, 18” Length.

• Maximum Transformer Size: 18 VAC.

• Battery Leads: 18 AWG, 18” Length.

• Low Battery Cutoff Voltage: ~10 VDC.

• Size: 1.75” x 2.185” (44.5mm x 55.5mm)Form “C”, 7 Amp @ 28 VDC.

Available in money saving bulk pack of 20 units, ELK-965-B20.

Available as Master Power Switch Only, ELK-964 or money saving
bulk pack of 20 pcs, ELK-964-B20.

PO Box 100 • Hildebran, NC 28637 • 800-797-9355 • 828-397-4200
Fax [phone] • www.elkproducts.com • [e-mail]