Elitegroup L372N1 User Manual
1
LCD PC
Manual
i -2
Notice
The information in this user’s manual is subject to change without notice.
THE MANUFACTURER OR RESELLER SHALL NOT BE LIABLE FOR ERRORS
OR OMISSIONS CONTAINED IN THIS MANUAL AND SHALL NOT BE LIABLE
FOR ANY CONSEQUENTIAL DAMAGES, WHICH MAY RESULT FROM THE
PERFORMANCE OR USE OF THIS MANUAL.
The information in this user’s manual is protected by copyright laws. No part of this
manual may be photocopied or reproduced in any form without prior written
authorization from the copyright owners.
Copyright August, 2002
All rights reserved.
Microsoft and Windows are registered trademarks of Microsoft Corporation. DOS,
Windows 95/98/ME/2000/NT/XP are trademarks of Microsoft Corporation.
Product names mentioned herein may be trademarks and/or registered trademarks
of their respective owners/companies.
The software described in this manual is delivered under a license agreement. The
software may be used or copied only in accordance with the terms of the agreement.
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is intended for
home and other limited viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Rev 1.0
i -3
TABLE OF CONTENTS
PREFACE
Symbols and Conventions
Protecting Your Computer - Avoid Abusive Handling and
Adverse Environment
Chapter Summaries
1. GETTING TO KNOW THE BASICS
Performance Features (1-2,3)
System at a Glance (1-4)
Top View (1-4,5,6,7)
Rear View (1-8,9,10,11)
AC Adapter (1-12)
Wireless Keyboard and Mouse (Optional Device) (1-13)
How to Set Up the Wireless Keyboard and Mouse
(1-13,14)
LED Status Indicators (1-15)
Graphic Subsystem (1-16)
LCD Brightness Control (1-16)
Using nView Desktop Manager (1-17)
TV-tuner / Video Capturing Functions (Optional Device)
(1-18,19)
Audio Subsystem (1-20)
Adjusting the Volume in Windows (1-20)
Adjusting the Audio Volume via the Volume Dial (1-20)
Voice Recording (1-20)
How to Enable S/PDIF Digital Output (1-21)
MP3 Player Functions (1-22,23)
Modem and Modem Set ting (1-24)
Ethernet Adapter (1-25)
Wireless LAN (802.11b) Configuration (Optional Device)
(1-26,27)
2. BIOS SETUP AND SECURITY
Entering the BIOS Setup Screen (2-3)
i -4
Leaving the BIOS Setup Screen (2-3)
BIOS Action Keys (2-3)
Modifying the BIOS Settings (2-4)
The Main Menu (2-4)
The Standard CMOS Setup (2-5)
About Hard Disk Drive Parameters (2-6,7)
The Advance CMOS Setup (2-7,8)
The Power Management Setup (2-8,9)
Using Password Protection (2-9)
Auto-Detect Hard Disk, Default Settings, Save, Exit
(2-9,10)
3. UPGRADING YOUR COMPUTER
Upgrading the Hard Disk Drive (3-2,3,4,5)
Upgrading the System Memory (3-6,7,8,9)
Adding a Mini-PCI Type Wireless LAN Card (Optional Device)
(3-10,11,12)
4. TROUBLE -SHOOTING
First Step (4-2,3)
Audio Problems (4-4,5)
Hard Disk Problems (4-6,7)
CD-ROM, DVD-ROM, or CD-RW Problems (4-8)
Graphic Problems (4-9)
Wireless Keyboard and Mouse Problems (4-10)
CMOS Battery Problems (4-11)
Memory Problems (4-12)
Modem Problems (4-13)
Network Adapter (Ethernet) Problems (4-14)
PC Card (PCMCIA) Problems (4-15)
Performance Problems (4-16)
Printer Problems (4-17)
Firewire (IEEE1394), USB, S/PDIF Problems (4-18)
APPENDIX A Product Specification
APPENDIX B Agency Regulatory Notices
i -5
Preface
Using This Manual
This User’s Manual contains general information about your
computer, hardware and software setup information,
troubleshooting, and technical specifications.
Symbols and Conventions
The following conventions and symbols are used in this manual:
?? When keys are to be pressed at the same time, a plus (+)
symbol is used. For instance, Fn+F7 means holding Fn and
F7 keys at the same time.
?? When a series of clicking actions is needed in Windows O/S, [ ]
and > symbols are used. For instance, [Start > Settings >
Control Panel > Display] means clicking the St art icon first,
then the Settings, then the Control Panel, then the Display
icon.
?? When you need to make a selection with the touch pad (or
mouse), you will be asked to `’select’ or ‘click’ or ‘double -click’,
‘right-click’ the item.
Note: Text in this format and symbol means specific instructions, commentary,
sidelights, or any additional information or notes that you should be aware of.
Warning: Text is this format and symbol means that failures to comply with the
given instructions or information could result in damage to your computer or could
cause bodily harm or loss of life.
i -6
Protecting Your Computer - Avoid Abusive Handling and
Adverse Environment
Follow the advice below will help ensure that you get the most out
of your Investment.
Your computer will serve you well if you take good care of it.
?? Do not expose the computer to direct sunlight or place it near
sources of heat.
?? Do not subject it to temperatures below 0oC (32oF) or above
50oC (122oF).
?? Do not expose the computer to magnetic fields.
?? Do not expose the computer to moisture or rain.
?? Do not spill water or liquid on the computer.
?? Do not subject the computer to adverse shock and vibration.
?? Do not expose the computer to dust and dirt.
?? Do not place objects on top of the computer to avoid damagi ng
the computer.
?? Do not place the computer on rocky surfaces.
Here are some ways of taking care of your AC adapter.
?? Do not connect the adapter to any devices other than your
computer.
?? Do not let water get into the adapter.
?? Do not block the ventilation airway of the adapter.
?? Keep the adapter in a cool and ventilated place.
?? Do not step on the power cord or place heavy objects on top of
it.
?? Carefully tuck away the power cord and any cables away from
pedestrian traffic.
?? When unplugging the power cord, do not pull on the cord itself
but pull on the plug.
i -7
?? Keep the adapter away from children.
?? The total ampere ratings of the equipment plugged in should
not exceed the ampere rating of the cord if you are using an
extension cord.
?? The total current rating of all equipment plugged into a single
wall outlet should not exceed the fuse rating.
When cleaning the computer, observe these steps:
1. Power off the computer and remove the battery pack.
2. Disconnect the AC adapter.
3. Use a soft cloth dampened with water. Do not use liquid or
aerosol cleaners.
Contact your dealer or see your service technician if any of the
following occurs:
?? Computer has been dropped or the body has been damaged.
?? Liquid has been spilled into the product.
?? The computer does not operate normally.
i -8
Chapter Summaries
The following is a summary of the available chapters and
appendices in this manual.
Chapter 1: Getting to Know the Basics
In this chapter, you will learn the basic operations and features
of your computer. It gives you a general understanding of the
makeup of your computer.
Chapter 2: BIOS Setup / Security
In this chapter, you will learn how to change various firmware
settings and what the settings mean. Also, you will learn how to
take advantage of the built-in security feature provided by the
BIOS.
Chapter 3: Upgrading Your Computer
In this chapter, you will learn how to upgrade the system
memory, the hard disk drive, and to install the optional mini-PCI
type wireless LAN (802.11b) card.
Chapter 4: Trouble-Shooting
In this chapt er, you will learn how to solve common hardware
and software problems.
Appendix A: Product Specification
In this section, you will find a list of the computer’s system
specifications.
Appendix B: Agency Regulatory Notices
In this section, you will find the general electro-magnetic and
safety regulatory information.
chapter 1 getting to know the basics
1-1
CHAPTER ONE
GETTING TO KNOW THE BASICS
This chapter introduces the features and
components of the computer.
chapter 1 getting to know the basics
1-2
Performance Features
?? High Performance Processor
The LCD PC is equipped with a powerful Intel Pentium 4
processor on the latest sub-micron Northwood process.
The processor also supports up to 533MHz front side bus
bandwidth for unparalleled performance.
?? Advanced Graphic Engine With Dedicated Frame
Buffer
An on-board N-Vidia GeForce4 Go 2D/3D video processor
for high performance graphics. The advanced graphic chip
also incorporates a hardware-based motion-compensation
engine, which gives you smooth MPEG video playback. 3D
graphics capability also adds realism to PC games.
?? Expandability
The system offers upgradeable hard disk drive and 2 DDR
SDRAM sockets for expansion, allowing the user to easily
increase the storage and system capacities as the need
arises.
?? Large LCD Display
The computer is equipped with a large 17-inch TFT
high-resolution display panel for clear text and brilliant
colors.
?? Audio Capability
chapter 1 getting to know the basics
1-3
The system is equipped with a build-in subwoofer, which
gives you more realism in sound. The audio playback
function supports 3D audio, 64-voices DirectSound, and
uses a hardware-based wave -table.
A built-in MP3 player allows you to playback MP3 tracks
without having to boot up to Windows.
The system is also equipped with a unique S/PDIF ditigal
audio output for external AC3, DTS, or PCM decoding
processor in your home audio-video system.
?? Communication Features
The system provides built-in Ethernet network adapter for
local network and 56K modem for point -to-point connection
or dial-up remote network.
?? Firewire (IEEE1394) and USB ports
In addition to a full array of built-in I/O ports, the computer
offers IEEE1394 for ultra high-speed connection to high
bandwidth digital video devices and 3 USB ports to connect
to any USB-based peripheral devices.
?? Wireless LAN (Optional)
The optional internal Wireless LAN module allows your
computer to connect wirelessly to other 802.11b-enabled
systems, devices, or network.
chapter 1 getting to know the basics
1-4
System At A Glance
Front View
1. Microphone
The built-in microphone records sound.
2. LCD Display
The panel is where the system content is displayed.
chapter 1 getting to know the basics
1-5
3. Stereo Speakers With Built-in Sub-woofer
The built-in speakers output the sound in stereo. The
sub-woofer enhances the system’s audio lower-end
frequencies.
4. CD-ROM (or DVD-ROM or CD-RW) Drive and Disk Eject
Button and Manual Eject Key Hole
If your computer comes with DVD-ROM, you may play DVD
movies or regular CD-ROM disk. If it comes with CD-RW drive,
you may save data onto a CD-R / CD-RW disk. Press the eject
button to eject the disk tray. The manual eject keyhole allows
you to manually eject a jammed disk.
5. MP3 Player On/Off Button
Press the MP3 Player Button to turn on the stand-alone MP3
player without having to boot to Windows. The player will play
songs stored in C: \MP3. Press and hold for 3~4 seconds to turn
off the MP3 player.
Note: Go to MP3 Player Functions section elsewhere in this chapter for a full
description of the MP3 operations and the function of the keys.
Note: A utility program must be installed to make full use of the MP3 player in
standalone (non-Windows) mode. (D:\MP3\Setup.exe)
6. Playback / Pause Key (in standalone MP3 mode)
Press the key once to start playback an audio track. Press
again to temporarily stop an audio track during playback. Press
again to resume playback.
7. Stop Key (in standalone MP3 mode)
chapter 1 getting to know the basics
1-6
Press the key once to stop an audio track during playback.
8. Repeat Key (in standalone MP3 mode)
Press the key once to repeat a current song or repeat the entire
album.
9. Previous / Fast -Backward Key (in standalone MP3 mode)
Press the key once to go back to the previous audio track.
Press and hold the key to perform a fast-backward search.
10. Next / Fast -Forward Key (in standalone MP3 mode)
Press the key once to go forward to the next audio track.
11. LCD Status Indicator (for MP3 Player)
The monochrome LCD display shows the status of the MP3
player.
12. TV / Cable Mode Hot Key
For computers with the optional TV-tuner and Video capturing
module only. In Windows, press the key once to bring up the
PiexelView application, which allows you to view or capture TV
/ Cable programs.
Note: Go to TV Tuner and Video Capture section elsewhere in this chapter for
a general description of the TV Tuner function and the associated operational
hot keys.
Note: A utility program called PixelView must be installed to view or capture
TV / Cable programs.
13. Internet Hot Key
chapter 1 getting to know the basics
1-7
The ‘Internet Hot Key’ launches the Internet Explore
automatically in Windows XP or 2000.
Note: To enable the Internet Hot Key, Email Hot Key in Windows O/S other
than XP / 2000, you must install the special Quick Keys application contained in
the factory CD-ROM (D:\Qkeys\Setup.exe).
14. Email Hot Key
The ‘Email Hot Key’ launches the MS Outlook Express in
Windows XP or 2000.
15. Power / Suspend Button
The power/suspend button turns the computer on and off and it
can also act as a system suspend key. Press momentarily to
turn on the system. Press and hold for at least 3~4 seconds to
turn off the system. How this key behaves can be defined in
[Start > Settings > Control Panel > Power Options > Advanced]
menu. Press the power / suspend button again to return from
the suspend mode.
16. LED Status Indicators
The LED Status indicators reveal the power state of the system
and also the status of HDD/CD-ROM/FDD drives.
17. Audio Volume Dial
Use the volume dial to control the loudness of the speakers.
chapter 1 getting to know the basics
1-8
Rear View
1. Mini PCI Card Slot Access Door
The optional mini-PCI-based wireless LAN IEEE802.11b card
can be installed in this slot to enable wireless connectivity to
other wireless LAN devices. Go to Chapter 4 to learn how to
install the optional wireless LAN card and go to later section in
this chapter to learn the basic functions of the wireless LAN
card.
2. Hard Disk Drive Access Door
The HD drive is located behind this door. Go to Chapter 4 to
learn how to replace the hard disk drive.
3. Memory Expansion Slot Access Door
chapter 1 getting to know the basics
1-9
Additional memory module can be installed in the DIMM
sockets to increase system memory. Go to Chapter 4 to learn
how to install additional DIMM module.
4. Multi-Device Bay
Depending on the options that the system is bundled with, a
standard FDD drive or an additional optical drive (which may be
CD-RW drive) can be installed in this bay. This is a factory
option and is not user-upgradeable.
5. Power Jack (DC-in)
The DC-out jack of the AC Adapter connects here and powers
the computer.
6. Ventilation Grill
The fan grill is where hot air is vented. Do not block this airway
completely.
7. Stand With a Tilt-able Head
The stand supports the computer. The stand also features a
tilt-able mechanism that allows you to tilt the computer to a
comfortable viewing angle.
8. Firewire / IEEE1394 Port
You may connect any Fire-wire-ready device to this port. The
6-pin IEEE1394 connector does not provide power to the
attached device; this port is for data transfer only.
9. S/PDIF Port
The special optical port carries digital audio signal. You may
chapter 1 getting to know the basics
1-10
connect an external DTS, AC3, or PCM sound processor /
decoder to this port.
10. Ethernet / LAN Port
The port connects to a network hub via the RJ-45 cable and
also conforms to 10/100Base-TX transmission protocol.
11. Modem Port
This is where you plug the phone jack (RJ-11) for fax/modem
functions.
12. Microphone Jack
The microphone jack (3.5-mm diameter) is where you connect
a microphone.
13. Stereo Headphone Jack
The stereo headphone jack (3.5-mm diameter) is where you
connect the headphones or external speakers.
14. PS/2 Keyboard / Mouse Port
The PS/2 port is where you connect a keyboard or mouse.
15. USB Port (x3)
The Universal Serial Bus (USB) port allows you to connect a
wide variety of devices via the USB cable to your computer at a
rate of up to 12 Mbps. This port conforms to USB plug-and-play
standards.
Note: For the system running the Windows NT platform, USB connectivity is
chapter 1 getting to know the basics
1-11
not supported.
16. PC Card Slot (Type II PCMCIA) and Card Eject Button
The slot is where PC Card (Type II PCMCIA) is inserted. Press
the eject button to release the PC Card.
17. S-Video In (for system with the optional TV Tuner / Cable
Card)
This is where you connect the analog S-Video output of the
source device such as a camcorder or VCR.
Note: Go to TV Tuner and Video Capture section elsewhere in this chapter for
a general description of the TV Tuner function and the associated operational
hot keys.
Note: A utility program called PixelView must be installed to view or capture
TV / Cable programs.
18. RCA A/V In (for system with the optional TV Tuner / Cable
Card)
This is where you connect the analog Video output of the
source device such as a camcorder or VCR.
19. Coaxial Antenna In (for system with the optional TV Tuner /
Cable Card)
This is where you connect the antenna or Cable TV box output .
chapter 1 getting to know the basics
1-12
AC Adapter
1. DC-out Connector
The DC-out connector docks to the power jack (DC-in) on the
computer.
2. Ventilation Grills
The grills are where air is exchanged in and out of the adapter
for internal thermal regulation. Do not block the airway
completely or let water get inside.
Warning: Do not let water get into the AC adapter
3. LED Lamp
The LED lamp appears green when the unit is plugged into a
valid AC source.
4. Adapter
The adapter converts alternating current into constant DC
voltage for the computer.
5. AC Plug
The AC plug plugs to the AC wall outlet.
chapter 1 getting to know the basics
1-13
Wireless Keyboard and Mouse (Optional Device)
You need to follow the procedures below to properly setup the
wireless keyboard, mouse, and transceiver set. Note where the
Channel Select Buttons are located on each of the three items. Be
sure you install fresh batteries to the mouse and the keyboard!
How to Set Up the Wireless Keyboard and Mouse
1. Boot to Windows.
2. Plug in the USB wireless transceiver. Windows XP will detect
its presence and load the HID driver.
3. Use the tip of a pen and press the Channel Select button on the
mouse. Then quickly press and hold the mouse’s right and left
keys together for at least 5 seconds. This allows the mouse to
select a frequency that is less prone to background
interference.
4. Use the tip of a pen and press the Channel Select button on the
chapter 1 getting to know the basics
1-14
keyboard. Then quickly press and hold the keyboard’s ESC key
for at least 5 seconds. This allows the keyboard to select a
frequency that is less prone to background interference.
5. Use the tip of a pen and press the Channel Select button on the
USB wireless transceiver. This allows the transceiver to detect
the selected frequencies (channels) of the keyboard and
mouse.
If either the mouse or keyboard does not work, both devices may
have inadvertently selected the same channel. Try to repeat the
above steps and try to enable the mouse before the keyboard
instead. You may need to attempt this a few times before both
devices function correctly.
Note: The wireless set works in the same frequency range as your microwave,
wireless phone, and/or other wireless devices such as IEEE802.11b. Adjacent radio
interferences may severely affect the quality of signals. Try to isolate and minimize
the source of interference. Try to select a different channel if either device’s
performance is less than satisfactory.
chapter 1 getting to know the basics
1-15
LED Status Indicator
LED Graphic
Indication
Symbol
Green light indicates the optical drive is
being accessed.
Green light indicates the floppy drive
and/or optical drive is being accessed.
Green light indicates the hard drive is
being accessed.
Blinking green light indicates the
computer is in suspend mode.
Green light indicates the power is on.
chapter 1 getting to know the basics
1-16
Graphic Subsystem
Your computer uses a high performance 17-inch active matrix TFT
panel with high resolution and multi-million colors for comfortable
viewing. The world-renowned N-Vidia GeForce4 video graphics
accelerator with its dedicated frame buffer (up to 64MB) performs
graphic rendering at a lighting-fast speed.
LCD Brightness Control
A Qkey utility application allows you to control the LCD
backlight. The Qkey application can be found in the factory
CD-ROM (D: \Qkey\Setup.exe)
To access the Qkey applet, right -click the Qkey icon in the task
tray and select Brightness.
Click the left button to increase brightness. Click the right
button to decrease brightness.
chapter 1 getting to know the basics
1-17
Using nView Desktop Manager
The nView Desktop Manager Utility allows you to control
certain display effects, such as “Dynamic Zoom”, on the
desktop.
To access the nView Desktop Manager Utility, go to [Start >
Control Panel > NVidia nView Desktop Manager].
chapter 1 getting to know the basics
1-18
TV-tuner / Video Capturing Functions (Optional Device)
The optional TV-tuner / Video Capturing module allows you to
watch and record TV programs or analog video sources. For
computer with this option, there are three analog video input
ports on the back of the system. Note the option is not
user-upgradeable.
?? You need to install the card’s driver from PixelView’s
installation CD-ROM disk.
?? You need to install a utility program called PixelView in
order to use the card’s function.
?? Press TV button and the PixelView application will start.
Or, simply go to [Start > Programs > PixelView] to launch
the application.
?? Connect one of the three input ports to an analog video
source or antenna.
?? The option is either NTSC or PAL compliant.
?? The recorded video clip is in .AVI format.
?? The front panel keys only works in Windows.
?? For more detail description of the TV functions, please
consult the program’s built-in on-line Help manual.
chapter 1 getting to know the basics
1-19
Channel
The front panel access keys:
UP
Play /
Pause
Capture
Start /
Stop
Channel
DOWN
TV
Description of the TV function keys:
TV button: In Windows, pressing the key launches the
PixelView application and TV box.
Play / Pause button: Plays the *.AVI files. Press again
to stop playback.
Capture Start / Stop button: Starts recording of the
selected channel. Press again to stop video recording.
Channel UP button: Selects the next channel.
Channel DOWN button: Selects the previous
channel.
Loading...