Elite FQ6VR 01, SQ6VR 01, SQ6VR 05, FQ6VR 05, FQ6VR 04 Use, Installation And Maintenance Instructions
...
SQ6VR - 05 model
2
SQ6VR - 06 model
SQ6VR - 09 model
DESCRIPTION OF THE HOT PLATES
SQ6VR - 01 model SQ6VR - 04 model
FQ6VR - 05 model
FQ6VR - 06 model
FQ6VR - 09 model
DESCRIPTION OF THE HOT PLATES
FQ6VR - 01 model FQ6VR - 04 model
3
4
SQ7VR - 05 model
SQ7VR - 06 model
SQ7VR - 09 model
DESCRIPTION OF THE HOT PLATES
SQ7VR - 01 model SQ7VR - 04 model
1 Radiant electric heating element "Hi-light" Ø 140 mm of 1200 W
2 Radiant electric heating element "Hi-light" Ø 180 mm of 1800 W
3 Radiant electric heating element "Hi-light" double cooking zone (conc.)
Ø 180/120 mm (or 210/120 mm) of 1700 W (2200 if Ø 210/120)
4 Radiant electric heating element "Hi-light" Ø 210 mm of 2300 W
5 Radiant electric heating element "Hi-light" double cooking zone (oval)
Ø 140/250 mm of 1800 W
6 Control knob for heating element n. 1
7 Control knob for heating element n. 2
8 Control knob for heating element n. 3
9 Control knob for heating element n. 4
10 Control knob for heating element n. 5
11 Residual heat indicator
5
FQ7VR - 05 model
FQ7VR - 06 model
FQ7VR - 09 model
DESCRIPTION OF THE HOT PLATES
FQ7VR - 01 model FQ7VR - 04 model
1) ELECTRIC GLASS CERAMIC HOB
The hot plates are equipped with 4 radiant heating
elements with different powers and diameters.
Cooking zones are aesily identifiables thanks to the
circles (see illustration in description) on the top;
relative powers are listed in the scheme n.1.
On the frontal panel, close to each knob, has been
silk-screened a scheme where is indicated to which
cooking zone the knob refers (fig. 1).
The scheme annexes a light indicator that turns on
when the cooking zone temperature is above 60° C
(see fig. 1).
The indicator will turn off only when the temperature
of the cooking zone will be below the value: this is
the reason why we call it residual heat indicator.
Connection of electric heating elements
Heating elements are controlled by energy
regulators with 6 positions (see fig. 1) that permit to
obtain a big range of different temperatures. In
Scheme 1, by way of information, we give
instructions to obtain different cooking levels.
To connect the heating elements is necessary to
turn clockwise or anticlockwise the relative knob.
Indicator light 11 shows the connection of one or
more heating elements.
To connect the heating elements with double
cooking zone is necessary to turn clockwise the
knob mapped in fig. 1 and stop in position "0".
To diminish from position 6 to position 2, insert one
cooking zone only.
How to use the cooking zones
Heating takes place only in the inside part of the
circles drawn on the special glass. The circles have
to be wholly covered by the pots.
6
USE
FIG. 1
USE
7
TABLE 1
1 140 Radiant 1200 1
“Hi-light”
2 180 Radiant 1800 1 - 2
“Hi-light”
4 210 Radiant 2300 2 - 3
“Hi-light”
3 180/120 Radiant 1700
or Conc. (2200 if Ø 2 - 3
210/120 “Hi-light” 210/120)
Zone Diameter Heating Power Commutators
n° in mm. elements W
6
4 - 6
To heat foods,
thaw deep-frozen
foods, to cook
fruits and pulses.
To melt butter,
chocolate and
else.
To fry with oil and
to heat big
quantities of water.
To cook roast of
meat, fish; to cook
steaks and eggs.
To cook meat,
fish, pulses with
sauce.
To heat small
quantities of liquid
and to keep dishes
warm.
Power and dimensions
of the cooking zones
Position for regulation
of the knobs
Possible
cookings
5 140/250 Radiant 1800 3 - 4
Oval
“Hi-light”
To heat foods, thaw
deep-frozen foods,
to cook fruits and
pulses.
8
WARNINGS:
For a correct use, please look at fig. 2 and remind:
- Switch on the electricity only after having
placed the pot on the cooking zone.
- Use pots and pans with flat solid bottoms.
- Use pots with the same diameter of the cooking
zones.
- Dry the bottom of the pot before put in on the
cooking zones.
- Do not scrape the pot against the glass so to
not damage it.
- During the use of the cooking zones, please,
keep the children away from the hot plates.
Make sure that the handles of the pots are
placed in the right way towards the interior. Be
aware that overheated fats and oils may become
inflamed.
- Cooking zones after using remain warm; don’t
leave objects, don’t lean your hands so to avoid
burns, till the indicator light is off.
- If the glass cracks, please, disconnect the
appliance.
- Don’t use plastic pots or alluminium sheets.
- Don’t use hob as a supplementary surface.
USE
FIG. 2
9
CLEANING
Before any cleaning operation, disconnect the
appliance from the electric circuit.
2) ELECTRIC GLASS CERAMIC HOB
If you want to preserve the surface clean and bright,
we recommend you to use a silicone conditioner.
The use of this conditioners, prior to jam-making,
helps to protect the surface of the hob.
It is very important to clean the surface soon after
every use, when the glass is still tepid.
Do not use metallic sponges, powder abrasives or
corrosive sprays.
Depending on the dirty level we recommend:
- Slights stains: it is enought the use of a moist
clean rag.
- Burnt or soiling may be removed with a special
razor scraper (fig. 4); be aware that the razor
can cause wounds.
- Marks of liquid, overflowed from the pot, can be
removed using vinegar or lemon.
- Pay attention to not let fall sugar or element with
sugar. In this case turn the switch off and clean
the surface with hot water and the razor blade
scraper.
- After a period of time may appear metal reflex and
scratches (fig. 4) due to the wrong cleaning and
the wrong use of the pots. The scratches are
difficultly removable, but they do not compromise
the good working of the hob.
- Don’t use steam jets for the equipment clening.
FIG. 3
FIG. 4
TECHNICAL ASSISTANCE AND SPARE PARTS
This appliance, before leaving the factory, has been carefully tested and regulated by expert and
specialized personnel in order to guarantee the best performances.
Any repairs or adjustments which may be subsequently required may only be carried out by qualified
personnel with the utmost care and attention.
For this reason, always contact your Dealer or your nearest After Sales Centre whenever repairs or
adjustments are required, specifying the type of fault and the model of appliance in your possession.
Please also note that genuine spare parts are only available from our After Sales Service Centres and
authorized retail outlets.
The above data are printed on the data label put on the inferior part of the appliance and on the packing
label.
The above informations give to the technical assistant the possibility to get fit spare parts and a heavensent intervention. We suggest to fill the table below.
MARK: ..........................................................................
MODEL: .......................................................................
SERIES: .......................................................................
Loading...