Elinchrom ELC 125, ELC 500 User Manual
ERROR MANAGEMENT ELC CONNECTION
www.elinchrom.ch/support
Error
number
Desription Solution
1 Capacitor overvoltage
4 Charge timeout
Voltage unstable
6
(Charge hold error)
18 Discharge circuit error
32 Head board type unknown
33 14 VDC error
Switch the unit off, wait
2 minutes and switch the
unit on again. If the error
shows up again the unit
requires a check-up at
an authorized Elinchrom
Service Centre.
Sync socket
USB socket for
rmware update
Power supply
www.elinchrom.com
Elinchrom is a registered trademark of ELINCHROM LTD, RENENS, SWITZERLAND
QSG ELC 125 / 500 - 08.2019
Av. de Longemalle 11, P. O. Box -458, CH-1020 Renens, Switzerland,
Tel. : + 41 21 637 26 77 Fax: +41 21 637 26 81 E-mail: elinchrom@elinchrom.ch
ELC
125 / 500
Unit
Quick Start Guide
Mode Off Normal Speed
Radio
Flash mode
Photocell Mode On Off
Extras
Info
Group 1-4
Frequency 1-20
Flash mode Standard Action
Recycling time Fast Eco
Flash before ready
Auto stand-by Off 1-59 min.
Auto-off Off 1-60 min.
Auto-on Yes No
Favorite function
Logo mode Low, High, Off, Low on ready, High on ready
Logo color Group color White
Ready tone 1-12
Ready volume Off, Min, Low, Default, High, Max
Error volume Off, Min, Low, Default, High, Max
Keyboard click Off, Min, Low, Default, High, Max
Background Black White
Friendly name
Firmware rev. *******
Skyport ID *******
Life time In hours (hhhh:mm)
Power-on count How many times the units has been turned on
Flash count Total ash number
Yes No
Flash mode, Recycling time, Flash before ready,
Skyport Group, Photocell Mode, Background
“ELC XXX -1” by default (set through computer), XXX =
125 / 500 depending on the model
1. Menu selected
2. Selected menu options
3. Menu option settings navigation
4. Exit menu navigation
5. Back
Knob Button :
Scroll function to change setting /
press function to enter the menu option.
1
5 4
MODELLING LAMP BUTTON
Long press to enter the menu.
Press menu for Mode, VFC, Timer.
2
Knob Button
CONTROL PANELSETUP MENU
3
DISPLAY PANEL – DASHBOARD
The colours of the upper bar correspond to the group number :
blue for the group 1, yellow for the group 2, red for the group 3
and green for the group 4.
Photocell
1 2 3 4 65
On / Off
7
10
89
-1 f-stop
/ back
Knob Button
CW: +0.1 f-stop / down
CCW: -0.1 f-stop / up
+1 f-stop
/ exit
Favorite
function
1. EL-Skyport Synchronisation
(normal or speed sync mode)
2. EL-Skyport frequency channel
and group number
3. Photocell status
4. Flash mode Action
5. Volume
6. Recycling time
7. Power setting in
f-stop equivalents
8. Increase by 1 f-stop
9. Decrease by 1 f-stop
10. Flash Duration value
Loading...