Elica ERS636S1 Specifications

TECHNE SERIES

RISE

TOP

PERFORMANCE

When the view out your kitchen window is too spectacular to
disrupt with a range hood, Elica’s Rise is the perfect solution.

Rise recesses completely out-of-sight into the countertop
(when not in use), but when it’s time to cook, Rise elevates a full
14” above the countertop (almost twice the height of
competitors), for added ventilating efficiency. On top of that,
Elica added Perimeter Aspiration Technology, which increases
suction 35% and actually draws air from the front burner
effectively, to create the best functioning downdraft on the
market. Rise comes equipped with a powerful 600 CFM internal
blower, which is operated by an electronic rotating control
that’s ush mounted into the countertop or cabinet face.

For maximum flexibility, the blower can be rotated to the
opposite side to make room for a floor mounted range.

PERIMETER
ASPIRATION

ELICA’S EXCLUSIVE

PLUS FEATURES

TECHNE SERIES

RISE

SPECIFICATIONS

30” UNIT 36” UNIT

Model:
Dimensions:
Blower Type(internal):
Blower Performance:
Speed 1
Speed 2
Speed 3
Speed 4
Noise (sones):

Woking Speed

Finish:
Controls:
Filter Type:
Installation Type:
Duct Transition:
Electrical:

CONSUMABLE PARTS:

Replacement Grease Filter (1)

ERS630SS

30”W x 12 1/2”D x 14”H

36”W x 12 1/2”D x 14”H

ERS636SS

600 CFM, 4-Speed Internal

205 CFM

2, 350 CFM

510 CFM
600 CFM

Min: 1.9, Max: 8.0

Stainless Steel

Electronic Rootating Disc

Perimeter Aspiration (Aluminium Mesh Filter Behind) Plus Perimeter Aspiration Plate

Ducted Installation only

6” Round with Back Draft Damper (side)

120V - 60Hz, 410 Watts at 3.4 Amps

GRI0107245A

*Consumable parts are sold in units of one (1). Order accordingly

PLUS FEATURES

TOP PERFORMANCE - Excellent performance for models equipped with
this plus. High fume capturing capacity with an average aspiration
range of 600 CFM's. with low noise levels, 1.2 - 1.7 sones at working
speed.

PERIMETER ASPIRATION - First developed by Elica, this technology
literally turned the market 180 degrees and opened the door to hoods
that could be mounted on the wall like picture frames. The technology
draws air through a narrowed channel around a face plate, which
increases suction, without increasing blower speed or energy
consumption.