Electro-Voice TX1181 User Manual
Key Features:
EVS-18S 18” (457mm) LF Transducer•
100 dB Sensitivity, 132 dB Maximum SPL•
Integrated Low Pass Filter with 6 dB/Octave •
Slope
500W Continuous (2000W Peak) Power •
Handling
Pole Mount to Elevate a Two-Way •
Loudspeaker
Mounting Points to Attach Optional TX-W1 •
Wheel Kit
TX1181
Single 18”
Direct-Radiating
Subwoofer
General Description: Technical Specifications:
The Electro-Voice® TX1181 is a high power subwoofer that can be
used to extend the low frequency performance of the TX1122 and
TX1152 loudspeaker systems.
The TX1181 uses the EVS-18S, a high excursion 18” woofer, coupled
to well braced enclosure with large, low distortion ports, to add high
impact bass response to any fullrange loudspeaker. An integrated
low pass filter allows the TX1181 to be connected in parallel with
a TX1122 or TX1152 on a single amplifier channel, eliminating the
need for additional amplifier channels and processing.
The TX1181 has many features that make it a versatile subwoofer
system. The enclosure is constructed out of a combination of MDF
and plywood, and coated with EVCoatTM for maximum strength and
durability. The unique grille design is very strong, dent resistant, and
features a rotatable logo. Four way handles allow for gripping the
TX1181 in a variety of positions. The recessed input panel with dual
NL4 connectors keeps the connectors hidden and allows for closer
placement to a wall or other boundary. An integrated pole mount
allows for elevating a TX1122 or TX1152, and integrated mounting
points on the rear of the enclosure allow the optional TX-W1 wheel
kit to be attached for easy portability.
Freq. Response1 (-3 dB): 50 Hz - 160 Hz
Freq. Range1 (-10 dB): 45 Hz - 700 Hz
Rec. Hipass Frequency: 30 Hz
Axial Sensitivity1: 100 dB (1W/1m)
Max. Calculated SPL1: 132 dB
Horizontal Coverage: Omnidirectional
Vertical Coverage: Omnidirectional
Power Handling: 500W Continuous, 2000W Peak
LF Transducer: EVS-18S, 18 in (457mm) Driver
Nominal Impedance: 8 Ohms
Minimum Impedance: 7.5 Ohms
Connectors: (2) Neutrik Speakon NL4’s
Enclosure Material: Plywood and MDF with EVCoat
Grille: 16 GA Steel, Black Powdercoat, with
Rotatable Logo
Dimensions (H x W x D): 30.3” x 20.0” x 23.3”
Net Weight: 74.5 lbs (33.8 kg)
Shipping Weight: 88.0 lbs (40.0 kg)
1
Half Space Measurement.
(769mm x 508mm x 591mm)
TM
Dimension Drawings:
20000
10000
1000
1005020
316
100
10
3.16
70
80
90
100
110
Frequency (Hz)
Sensitivity (dB)
Impedance (Ohms)
Frequency Response, Half Space
Impedance
Top View
Frequency Response & Impedance:
(6) Mounting Points
for Optional TX-W1
Wheel Kit
Front View
Right View
Rear View
Bottom View
Block Diagram:
TX1181 Part Numbers
PRD000142-001 TX1181, Single 18” Sub, Black Finish•
Performance Match
PRD000138-001 TX1122, Single 12” Two Way, 90° x 50° •
Full-Range, Black Finish
PRD000139-001 TX1152, Single 15” Two Way, 60° x 40° •
Full-Range, Black Finish
D170401 CP4000S, 120V Power Amplifier, 2 x 1400W•
D170312 CP3000S, 120V Power Amplifier, 2 x 1100W•
D170258 CP2200, 120V Power Amplifier, 2 x 800W•
PRD000043-001 DC-One, 120V Digital Loudspeaker Controller•
Accessories
301397-135 PCL35, Steel Threaded Subwoofer Pole, •
Black
ACC000043-000 TX-W1, Wheel Kit for TX1181 and TX2181, •
Black
Electro-Voice
12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043
www.electrovoice.com
© Bosch Communications Systems 05/2008
Part Number LIT000179 Rev 3
®
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other Internatonal locations. For customer orders, Contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 887-9212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at: 866/78AUDIO
Specifications subject to change without notice.
Loading...