Electro-Voice TX1152 User Manual

Key Features:

DH3 1.25” (32mm) Diaphragm, 1” (25mm) Exit •
Pure Titanium Compression Driver

SMX2151 15” (381mm) LF Transducer with •
Fully Symmetric Drive

th

Advanced 4•
Protection

60° x 40° Rotatable Coverage Pattern•
100 dB Sensitivity, 133 dB Maximum SPL•
500W Continuous (2000W Peak) Power •

Handling
Pole Mount for Tripod Use•
(6) 3/8” Threaded Points for Suspension•

Order Crossover with HF

TX1152

Single 15” Two-Way,
60° x 40° Full-Range

Loudspeaker System

General Description: Technical Specifications:

The Electro-Voice® TX1152 is a high power, high sensitivity, 2-way
loudspeaker system that can be used in a variety of applications
where high quality sound reinforcement is required in a lightweight
package.

The TX1152 utilizes the DH3, a high output 1.25” titanium compres­sion driver, coupled to a Constant Directivity™ 60° x 40° horn. This
combination results in a smooth response to 20 kHz and excellent
pattern control in medium throw applications.

The SMX2151 15” woofer has an FEA optimized magnet structure
and a shorting ring for ultra low distortion and maximum intelligibility
at high SPL levels. The crossover uses steep 24 dB/octave slopes
with equalization for very smooth response in vocal range, extended
HF, and a protection circuit for long term reliability.

The TX1152 has a variety of features that make it equally suited for
portable or fixed installation applications. The trapezoidal enclosure
is constructed out of a combination of plywood and MDF, and coated
with EVCoatTM for maximum strength while still remaining light­weight. The unique grille design is very strong, dent resistant, and
features a rotatable logo. Four way handles allow for gripping the
TX1152 in a variety of positions, a pole mount allows for placement
on a subwoofer or a tripod. Six 3/8” threaded points allow a single
TX1152 to be suspended in a various positions. The recessed input
panel with dual NL4 connectors panel keeps the connectors hidden
while allowing the TX1152 to be used with the TX1181 subwoofer for
extended sub bass on a single amplifier channel, with no additional
processing needed.

Freq. Response1 (-3 dB): 55 Hz - 20 kHz

Freq. Range1 (-10 dB): 40 Hz - 20 kHz

Rec. Hipass Frequency: 40 Hz

Axial Sensitivity: 100 dB (1W/1m)
Max. Calculated SPL: 133 dB
Horizontal Coverage: 60°, or 40°

Vertical Coverage: 40°, or 60°

Power Handling: 500W Continuous, 2000W Peak

LF Transducer: SMX2151, 15 in (381mm) Driver

HF Transducer: DH3, 1.25 in (32mm) Diaphragm

Crossover Frequency: 1650 Hz

Nominal Impedance: 8 Ohms

Minimum Impedance: 5.6 Ohms

Connectors: (2) Neutrik Speakon NL4’s

Enclosure Material: Plywood and MDF with EVCoat

Suspension: (6) 3/8” Threaded Points - (2) on

Dimensions (H x W x D): 30.6” x 17.5” x 17.5”

Net Weight: 61.2 lbs (27.8 kg)

1

Half Space Measurement.

Shipping Weight: 68.7 lbs (31.2 kg)

Compression Driver

Grille: 16 GA Steel, Black Powdercoat, with

Rotatable Logo

Each Side and (2) on the Rear of
Enclosure

(776mm x 446mm x 446mm)

TM

Dimension Drawings:

20000

10000

1000

1005020

316

100

10

3.16

70

80

90

100

110

Frequency (Hz)

Sensitivity (dB)

Impedance (Ohms)

Frequency Response, Half Space
Frequency Response, Full Space
Impedance

Frequency Response & Impedance:

Top View

Front View Bottom ViewRight View

Block Diagram:

(6) 3/8” Threaded
Points - (2) on Each
Side and (2) on the

Rear of Enclosure

Rear View

TX1152 Part Numbers

PRD000139-001 TX1152, Single 15” Two Way, 60° x 40° •
Full-Range, Black Finish

This TX1152 Loudspeaker should be suspended overhead only in accordance with the procedures and limitations specified.

Electro-Voice

12000 Portland Avenue South, Burnsville, MN 55337
Phone: [phone], Fax: [phone]

www.electrovoice.com

© Bosch Communications Systems 05/2008

Part Number LIT000176 Rev 3

Performance Match

PRD000142-001 TX1181, Single 18” Sub, Black Finish•
D170401 CP4000S, 120V Power Amplifier, 2 x 1400W•
D170312 CP3000S, 120V Power Amplifier, 2 x 1100W•
D170258 CP2200, 120V Power Amplifier, 2 x 800W•
PRD000043-001 DC-One, 120V Digital Loudspeaker Controller•

Accessories

302053-001 TSS-1, Single Aluminum Tripod Stand, Black•
302053-000 TSP-1, Two Aluminum Tripod Stands with •
Carrying Case
5542930 EBK-1, 3/8” Forged Eyebolt Kit, Set of Three•

CAUTION

This system should be suspended with certified rigging hardware by an authorized rigging professional and in compliance

with local, state, and federal overhead suspension ordinances.

®

Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:

U.S.A. and Canada only. For customer orders, contact Customer Service at:

800/392-3497 Fax: [phone]

+ 49 9421-706 0 Fax: + 49 9421-706 265

Other Internatonal locations. For customer orders, Contact Customer Service at:

+ 1 952 884-4051 Fax: + 1 952 887-9212

For warranty repair or service information, contact the Service Repair department at:

800/685-2606

For technical assistance, contact Technical Support at: 866/78AUDIO

Specifications subject to change without notice.