Electro-Voice RE3-RX Datasheet
Electro-Voice | RE3-RX RE3 Diversity Receiver
RE3-RX RE3 Diversity
Receiver
▪ Diversity reception minimizes dropouts
▪ Up to 36 MHz tuning bandwidth (band specific) for
trouble-free operation
▪ Easy-to-read LCD display
▪ Frequency scanning for selecting open frequencies
▪ Sync function links transmitter to receiver for easy
setup
The RE3-RX is a professional rack-mountable, ½ space
diversity receiver. Designed to function as the control
center for an RE3 wireless set, it features frequency
scanning and synchronizing, as well as full transmitter
control settings which synchronize to a mated
transmitter.
The diversity reception technology minimizes the
chances of signal dropouts by providing two separate
antenna locations which are electronically chosen
moment-by-moment based on signal strength and
stability. The wide tuning bandwidth provides access
to a wide range of frequencies, selectable in 25kHz
steps for trouble-free operation of single and multichannel systems. The easy-to-read LCD display
provides vivid viewing of all menus and operating
parameters. The easy-to-use frequency scanning
function simplifies locating and tuning to a clear
operating frequency. The sync function wirelessly
synchronizes all operating parameters to the mated
transmitter.
Technical specifications
Frequency oscillation mode: Phase-locked loop (PLL)
Carrier frequency range: 470 - 865 MHz
(tuning bandwidth is band
dependent)
Band names, tuning
bandwidths, and carrier
frequency ranges:
5L: 36 MHz (488-524 MHz)
5H: 36 MHz (560-596 MHz)
6M: 10 MHz (653-663 MHz)
8M: (823-865 MHz)*
T: 3 MHz (803-806 MHz)
*8M is split into two segments:
823-832MHz: 9MHz
863-865MHz: 2MHz
Sync frequency:
Diversity: Antenna diversity
Bandwidth: 36MHz
Signal/Noise ratio:
Total harmonic distortion
(Thd):
Receiving sensitivity: -81dBm for -12dB SINAD
Frequency response: 63Hz~16kHz±2dB (BPT)
Antenna type:
Antenna booster power:
Function display by: LCD
Contents of display:
Ultrasonic 40 kHz
>100dB(A)
<0.6%@1kHz
51Hz~16kHz±2dB (HHT)
Detachable ½ wave with BNC
connector
DC12 - 15V/100mA
Group, channel, frequency, antenna
A/B, transmitter battery level,
transmitter status (mute, live, or no
sync), output level attenuation, AF
indication, RF indication, key lock
indicator.
210 mm
44 mm
47 mm
155 mm
175 mm
2 | RE3-RX RE3 Diversity Receiver
Control functions: Power, scan, frequency, group,
Sync data options:
Audio frequency output level:
Audio frequency output
impedance:
Squelch and noise muting:
Output ports:
Power supply: DC12~15V/500mA
Finish:
Dimensions: Width: 8.27 in. (210mm)
Net weight:
Gross weight: 3.28 lb (1.49 kg)
Dimensions:
channel, squelch, TX sensitivity, TX
attenuation, TX RF power, TX auto off,
TX key lock, TX display info, TX sync
configuration, RX output volume, RX
output level, RX antenna booster
power, RX key lock, RX display
contrast, RX display brightness, RX
system reset.
Frequency, group, channel,
sensitivity level, attenuation status,
RF power, auto off status, key lock
status, transmitter display (freq or
Gp/Ch)
Ref：±22.5kHz Dev@1kHz Tone
¼” (6.3mm) Phone Jack：-10dBV
XLR
Jack：-4dBV(Line)、-24dBV(MIC)
240Ω (unbalanced)
1400Ω (balanced)
Noise muting and tone code locking
1 x balanced XLRM jack
1 x unbalanced ¼” TS (6.3mm) jack
Black polyurethane paint
Height: (with feet attached) 1.85 in.
(47mm)
Height: (without feet attached) 1.73
in. (44mm)
Depth: (including antenna jack) 6.89
in. (175mm)
Depth: (not including antenna jack)
6.1 in. (155mm)
2.71 lb (1.23 kg)
Licensing and certification declarations:
IC: This Class B digital apparatus complies with
Canadian ICES-003. Cet appareil numérique de la
classe B est conforme à la norme NMB-003 du Canada.
This device complies with Industry Canada licenseexempt RSS standard(s). Operation is subject to the
following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including
interference that may cause undesired operation of
the device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux
conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.
CE and EU: The CE Declaration of Conformity can be
obtained and downloaded from:
www.electrovoice.com
This Equipment is in compliance with CE requirements
and the following directives:
2011/65/EU RoHS Directive
•
• 2012/19/EU WEEE Directive
• 2014/53/EU RED Directive
AU and NZ
: This device is in compliance with Cispr32.
Replacement parts
For full operational information, download the RE3
installation manual at www.electrovoice.com.
Order number Description
ESP-EF01U362330
ESP-EF01U362333 RE3 antenna, 5L band, 480-524MHz
ESP-EF01U362334 RE3 antenna, 5H band, 560-596MHz
ESP-EF01U362335
ESP-EF01U362336 RE3 antenna, 8M band, 823-865MHz
ESP-EF01U362337 RE3 antenna, T band, 803-806MHz
ESP-EF01U362338
RE3 rubber feet, skid pads and screws
RE3 antenna, 6M band, 653-663MHz
RE3 receiver power supply with AC clips
Loading...