Electro-Voice RE200 User Manual
Key Features:
• Continuous Presence Rise Enhances Sound
Quality
• True Condenser Design
• Transformerless Output
• Small, Unobtrusive Profile
• Includes Stand Clamp, Windscreen, and
Zippered Vinyl Pouch
RE200
Cardioid, True Condenser
Instrument Microphone
General Description:
The Electro-Voice® RE200 is a cardioid, true condenser
instrument microphone designed for the exacting acoustic
reproduction of choirs, strings, percussion and brass
instruments in live performance and sound recordings. The
RE200 is designed to be used in professional remote
recordings, sound reinforcement systems, sound studios and
motion picture/TV scoring stages.
The RE200’s frequency response has a continuous presence
rise to enhance the sound quality. The excellent transient
response and smooth frequency response is gently lifted
above 1,000 Hz, lending an open, transparent detail to the
recorded sound.
The RE200’s transducer is a true, external biased condenser
element based on the RE2000 transducer design. (Most
studio recording microphones are true condensers because
they have greater sensitivity and stability than an electret
element). The diaphragm is ultrathin, goldlaminated,
environmentally stabilized and ultralow in mass. The electrode
is a precision-cut, singlepiece, ceramic disc layered with gold.
The transducer is biased by an internal dc-to-dc converter to
ensure that its sensitivity and performance is not dependent
on phantom voltage. The RE200 transducer is cradled in an
AcoustiDYM
The RE200’s electronics are designed to operate from 12 to
52 Vdc phantom power.
The RE200 is small, light and rugged, making it ideal for a
variety of applications without being obtrusive.
The RE200 is supplied with the model 311 microphone stand
clamp, a zippered vinyl carrying pouch and a Wind Tech
5700-12 black external foam windscreen.
1. Wind Tech™ is a trademark of Olsen Audio Group, Inc. The 5700 windscreen
can be purchased separately from Wind Tech at 480/998-7140.
TM
shock-mount system for mechanical isolation.
1
™
Technical Specifications:
:tnemelEgnitareneG)desaibyllanretxe(resnednoceurT
:esnopseRycneuqerFzH000,81-05
:nrettaPraloPdioidraC
tiucriCnepO,ytivitisneS
:zHk1,egatloV
:)DHT%1(leveLgnippilCLPSBd031
:esioNtnelaviuqE02=Bd0(dethgiewA,LPSBd12
:egnaRcimanyDBd901
:)zHk1(ecnadepmItuptuOsmho002
:stnemeriuqeRrewoPylppusmotnahpcdV25-21
:ytiraloPhtiw,3nipotdecnerefer,evitisop2niP
:hsiniFkcalb”aremac“ssolgimeS
:snoitidnoClatnemnorivnE
:%05-0ytidimuHevitaleR)C°47ot92-(F°561ot02:a/°59-0ytidimuHevitaleR)C°75ot92-(F°531ot02:)ylnOciM(snoisnemiD
:recudsnarTtAhtdiW)mm9.72(.ni1.1
:eldnaHtAhtdiW)mm3.02(.ni8.0
:htgneL)mm2.731(.ni4.5
:enohporciM,thgieWteN)g581(zo5.6
:thgieWgnippihS)g654(zo1.61
:dedulcnIseirosseccApmalcdnats113
lacsap/Vm01
)slacsaporcim
mgarhpaidehtnoerusserpevitisop
hcuopgniyrraclynivdereppiZ
1
neercsdniwmaof
lanretxekcalb21-0075™hceTdniW
Frequency Response:
Polar Response:
5dB per
division
Microphone Use and Placement
Please note that micing techniques are a matter of personal preference. These are merely guidelines to assist in the placement of the
microphone to gain optimal performance.
Usage Optimal Placement
Overheads Use two microphones in a 3:1 spacing position facing slightly away from each other.
Hi Hat Place microphone 3-6 inches (7-15 cm) from and at a 45° angle to cymbal edges.
Acoustic Guitar Place microphone 6-24 inches (15-60 cm) from and pointed towards body end of finger board.
Strings For small string instruments, place microphone 1-3 feet (30-90cm) from and perpendicular to
the soundboard, pointing at the strings and f holes. Use similar microphone positioning for
larger string instruments, but 6-8 feet (1.8m - 2.5m) away.
Standard Placement & Use Guidelines
1. Always point the microphone at the desired source of sound, and away from any unwanted sources.
2.The microphone should be located close to the sound source to minimize interference from other potential sound sources.
3. Use the 3-to-1 rule when using multiple microphones. Place each microphone three times farther from other microphones as from the
desired sound source.
4. Minimize over-handling of the microphone to reduce unwanted mechanical noise.
5.Working close to the microphone will increase the bass tone and also provide increased gain-before-feedback.
Dimension Drawing:
5.4 in
(137.2 mm)
1.1 in
(27.9 mm)
RE200 Part Number: 16562382
0.8 in
(20.3 mm)
12000 Portland Avenue South, Burnsville, MN 55337
Phone:952/884-4051, Fax:952/884-0043
www.electrovoice.com
© Telex Communications, Inc. 1/2004
Part Number 533868 Rev C
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 736-4212
For warranty repair or service information, contact the Service Repair department at:
800/553-5992 or 402/467-5321
For technical assistance, contact Technical Support at: 800/392-3497 or 952/736-4656
Specifications subject to change without notice.
Loading...