Electronics MC User Manual

Download

MC Controller

MagnaValve® Media Flow Controller

Features

• Provides a power signal to the VLP-1000, LP-2000, and 100 MagnaValve®

• 10-turn potentiometer setpoint

• Accepts remote command setpoint or 0 -10 Vdc from PLC

• Easy panel mounting

• 120 Vac 50/60 Hz

Description

The MC Controller provides the power signal for the manual MagnaValves series (VLP-1000, LP-2000, and 100 MagnaValve®). It provides a 0-100% range of output to the MagnaValve using pulse width molulation (PWM). The controller may operate alone or in conjuction with a remote 0 - 10 Vdc setpoint command. Both wheel- and air-type MagnaValves can be used with this controller.

A clear and comprehensive installation manual simplies installation for the MC Controller and the product is supported by the Electronics Inc. application engineering sta.

Media

Hopper

Desired

Motor Current

Control Signal

Controller

Regulated Media Flow

Motor

Current

Ammeter

Media Accelerated

The MC Controller and MagnaValve make an open-loop system

with a wheel-type machine

Available for download at www.electronics-inc.com

• VLP-1000 MagnaValve Data Sheet • 100 MagnaValve Data Sheet

• LP-2000 MagnaValve Data Sheet • MC Instruction Manual

MagnaValve

Wheel

Electronics Inc.

56790 Magnetic Drive

Mishawaka, Indiana 46545 USA

(574)256-5001

www.electronics-inc.com

Specication is subject to change without notice

MagnaValve is a registered trademark of Electronics Inc.

Rev 1/13

Specifications

Power 120 Vac, 50/60 Hertz, 50 VA Inputs Remote Command Setpoint (0 - 10 Vdc) Enable (98 - 120 Vac) Outputs Valve Power 50 Vdc PWM at 8 Hertz Reference Voltage 10 Vdc Weight 4 lb/1.8 kg

Dimensions

MC Controller

MagnaValve® Media Flow Controller

5.67''

(144 mm)

2.84''

(72 mm)

9.0''

(229 mm)

Shown with front panel removed

Panel Cutout Dimensions:

2.64’’ W x 5.35’’ H (67 mm x 136 mm)

Standard DIN opening