Electrolux ZCV900 User Manual [en, es, fr]
Electrolux Central Vacuum Systems
LCD INSTRUCTION
MANUAL
Read This Manual Thoroughly Before Use
MAIN SCREEN
The main screen is shown when the system is connected to an
electrical outlet. This is the screen displayed in regular operations
mode with full system performance. The system performance plus
local time and temperature can be viewed from the Main Screen.
Along the bottom of the screen the following icons are displayed
from left to right, the Power(
Toggle Arrow icons and the Enter ( ) icon. To scroll through the
LCD menus, the button directly below each corresponding icon
executes the navigational feature.
) icon, the Left( ) and Right( )
Power Button
English
Toggle Buttons
Enter Button
USER SETUP
Your LCD enabled power unit provides the ability to customize the
temperature(Celcius or Fahrenheit) and time formats(12-hour or 24hour). Formats can be customized using the USER SETUP menu.
To enter the USER SETUP menu, press the <Enter> button.
Temperature Customization
Use the Left and Right toggle buttons to select the temperature
format of either C or F. Once the correct format has been selected,
press the <Enter> button to proceed to the next screen.
Time Format Customization
Use the Left and Right toggle arrows to select the time format of
either 12 or 24 hours. Once the correct format has been selected,
press the <Enter> button to proceed to the next screen.
Time Setting
The time can be changed by using the Left and Right toggle buttons.
The first number field in the display is underlined with a bar,
indicating that it can be adjusted with the toggle buttons. Press the
<Enter> button to proceed to the next number field.
Review User Setup Settings
The next screen displays the temperature and time with the user
selected formats. Press the <Enter> button to return to the Main
Screen
English
SYSTEM CHECKS
The System Checks menu provides the ability to monitor overall
system performance. Specific elements monitored include the dirt
receptacle level, airflow performance, motor and electrical systems,
and the need for power unit service. The happy face indicates that each
monitored element of the power unit is performing at optimal levels.
Use the right and left toggle buttons to scroll through the SYSTEM
CHECK screens to view each system monitoring element.
Main Screen
Dirt Receptacle and Happy Face
This display denotes that the dirt receptacle does NOT currently
need to be emptied.
Three to Five Performance Bars and Happy Face
This display indicates the system is performing at the optimal airflow
level. The power unit motor is operating at optimum performance
when all five power bars are illuminated. Normal operating
performance is when three to five bars are shown. Performance
levels will decrease as the filter is loaded with debris or as the motor
has significant wear. Fewer bars will be illuminated as performance
decreases.
When the power unit is off, the display will illuminate the airflow
level of the last operating cycle. Note: It is also normal to see changes
in performance when specialty attachments are used.
Motor Icon and Happy Face
This display indicates all electrical and motor components are
functioning properly.
Telephone Icon and Happy Face
This screen indicates that the system has NOT encountered any error
conditions and it is NOT necessary to call for service at this time.
System Run Time
This display shows you the overall number of hours that the power
unit has operated. It shows your total time of vacuuming with the
Electrolux system.
SYSTEM ALERTS
Your LCD enabled power unit is constantly monitoring the system
status. In the event of an error condition, it will provide a system
alert on the LCD in place of the Main Screen.
The sad face indicates that the power unit has experienced an error
condition. The power unit may display the following alerts:
Main Screen Appears Flashing
If the power unit receives an excess of electricity such as an over
current situation, the Main Screen will start flashing.
The flashing Main Screen indicates that the power unit has
automatically recovered from an error situation and will operate
properly when powered on.
Bucket Icon with Sad Face
This screen will be displayed when the dirt receptacle needs to be
checked for emptying. After checking(and possibly emptying) the
bucket, press the <Enter> button to return to the Main Screen. This
will reset the timer for the bucket monitor.
English
Empty/Flashing Power Bars with Sad Face
This screen is displayed when the power unit motor is unable to
operate at optimal system performance. When only 2 bars or less
are illuminated, the airflow is restricted, meaning the vacuums
cleaning power has decreased. If the remaining bars are flashing,
the airflow restriction has been present for more than 12 minutes
of vacuuming and attention is urgent. Air flow can be restricted by
several factors:
1) Loaded Filter
(see “Filter Maintenance” section of the Power Unit Owner’s Manual)
2) System Blockage
(see “Trouble Shooting” section of the Power Unit Owner’s Manual)
3) Motor Wear
(contact an authorized service technician)
The most common cause is a loaded filter, and the system performance
can be restored by cleaning the filter. Alternatively, there may be a
system blockage, and the hose and piping system needs to be checked
for blockage.
Motor Icon with Sad Face
This screen indicates that the motor has shut down due to an
electrical fault. When the system experiences an electrical failure
it will attempt to automatically reset after a 15 to 30 second delay.
Once recovered, the display will return to the flashing Main Screen,
English
indicating that the power unit has been reset and will operate
properly when powered on.
In the event that the system is unable to automatically reset, the
display will switch to the Phone Icon with a Sad Face screen,
indicating the need to contact a service technician for service. This
indicates a motor failure, where service is needed.
Phone Icon with Sad Face
This screen will be displayed for either of two reasons:
1) The system experiences a failure that requires repairs by an
authorized service technician.
2) The power unit reaches 500 hours in the life-cycle when the
motor brushes and filter should be checked for wear.
To resolve this system alert, contact a
HINT: Changing the motor brushes is an inexpensive way to
increase the overall motor life and is recommended after 500 hours
of operation.
service technician.
Loading...