Electrolux ZC24/10F, ZC24/10FS User Manual

1

Index

Safety Instructions pág. 2

Installation pág. 3 - 4

Changing the opening
directions of the doors pág. 5

Regulation and Control pág. 6 - 7

How to use your
Fridge-Freezer pág. 8 - 9

Maintenance of your
Fridge-Freezer pág. 10

Something not working pág. 11 - 12

Normal noises when
functioning pág. 13

Guarantee, Service
and Spare Parts pág. 14

Tecnical Features pág. 15

2

m Ice lollies can cause frost burns if consu-

med straight away from the freezer.

m Do not use electrical appliances inside the

fridge/freezer.

m Do not place carbonate or fizzy drinks in the

freezer as these may explode.

m Whenever you discard and old freezer

make sure to:

m Take off the doors in order to prevent

children being trapped inside.

Have the gas R600a from the cooling
system removed by an authorised per­son before making it into scrap metal.

m

Safety instructions

Warnings for your safety. Carefully read these ins­tructions before installing and using the machine

m This appliance is designed to be operated by

adults only. Children should not be allowed to
tamper with the controls or play with the pro­duct.

m Any electrical work required to install the

appliance should be carried out by a qualified
electrician or competent person.

m This appliance is heavy. Care should be taken

when moving it.

m Maker sure that the cable is not trapped under-

neath the appliance, nor touches the motor.

m Repairs carried out by inexperienced persons

may cause injuries or serious malfunctioning.
Refer to the THECNICAL OFICIAL SERVICE.

m The appliance should be left for at least 4 hours

after installation before it is turned on in order
to allow the refrigerant to settle.

m This product must only be serviced by an aut-

horized Thecnical Oficial Service, and only
genuine SPARE PARTS should be used.

m Before cleaning or reparing the appliance,

make sure it is unplugged.

m It is dangerous to try and alter the specifica-

tions or modify this product in any way.

m These domestic appliances are designed to be

used specifically for the storage and conserva­tion of food.

m Frozen food must not be re-frozen once it has

been thawed out.

m Manufacturers storage recommendations

should be strictly complied with.

3

Installation

Fig. 1

Fig. 3

Fig. 2

Fig. 4

Positioning

 Place the refrigerator away from direct sunlight

and heat sources.
 Take off at least 50 mm. free over the appliance.
 Never put something on the ventilator of the

appliance. (see fig. 1).
 Make sure the refrigerator is accurately levelled

turning the adjustable feet on the front, in order to

avoid vibrations and noises and to make sure that

the doors shut properly (see fig. 2).
 Before placing the plinth cover, pull out the fixing

part of doors used only for security during trans-

port (see fig. 3).
 With the freezer door wide-open, assemble the

socle provided inside the appliance, following the

instructions stuck on it.
 Remove the shelves transport fastening red pie-

ces by sliding them (see fig. 4).
 The appliance should not be located in places

with maximum temperatures more than:

+ 32°C for N/SN Class (classification on rating

plate).

+ 43°C for T/ST Class (classification on rating

plate).

If the temperatures are higher than those mentio-

ned above, the functioning and the safety of the

appliance could be affected.

Cleaning the interior

 Do not use alcohol or any cleaning produts contai-

ning alcohol because they could damage the plas-

tic parts of the appliance.
 Before using the appliance for the first time, wash

the interior with luke warm water and a neutral

soap. This will help to remove the typical smell of

a new fridge/freezer. Afterwards dry thoroughly.
 Do not use detergents or abrasive powders as

these will damage the finish.
 Remove security elements used for transportation.

Electrical connection

mBefore plugging the appliance into a socket make

sure that the voltage and frequency shown on the

rating plate correspond to your home supply. (see

fig. 5).
mIt is essential that the appliance should be pro-

perly earthed.

For this purpose the supply cable plug incorpora-

tes a special earth contact. If the sockets of your

domestic wiring system are not earthed, have the

appliance connected to a separate earth wire in

accordance with existing safety regulations.

4

Installation

Fig. 5

Fig. 6

door alarm

temperature alarm

fast freeze

on/off

temperature

control fridge

temperature

control freezer

Starting - up

 Plug the appliance into the wall socket.
 Open the fridge door.
 Push the on/off button located in the fridge, con-

tinuosly for 3 seconds. The fridge will start to

function and the internal light will then go on.

The on/off button will be a bright green colour

and the fridge/freezer controls will ligh up. (see

fig. 6).
 The temperature alarm (a beeping noise) could

go on during the start up phase. If this happens

push the temperature alarm button. (See sec-

tion on the temperature control for more

details).
 You can now close the door.

rating
plate

5

Changing the opening direction
of the doors

Fig. 7

Fig. 8

If you wish to change the opening side of the
doors proceed as follows:

1... Open the freezer door. All the appliances have
a ventilation socle at the bottom. Remove it
pushing strongly on the central and upper
part. The upper supports will be loosed takes
the piece out. Then, take the hinge cover off
the opposite side of the ventilation cover and
place it as required. (see fig. 7).

2... Removing the central hinge:
 Open both doors.
 Remove the external pin and then close the
freezer door.
 Remove the other pin and close the fridge
door.
 Taking care the doors do not fall, pull them
off till bolts are loose.
 Put the doors carefully on the floor.

3... Swap the hinge and the corner cupboard and
change the lower hinge pin and the screw
cover of the centre transom to the other side.

4... Change the door self-closing system, putting
the freezer doors on the fridge door and vice­versa.

5... Fit the freezer door into the lower hinge bolt
and put the central hinge into the door.

6... Fit the fridge door into the upper hinge bolt.
Pulling both doors outwards, fit the central
hinge bolt too. Place the doors.

7... Open the fridge door and screw the central
hinge pin. Then, open the freezer door and
screw the other pin.

8... Assemble socle keep the door open, close it
up to the metallic part.
Fit the two lower flaps of the plastic piece into
the metallic one, press down wards the two
upper hooks (without stopping pressing the
socle).
Push it to wards the metallic one till they fit
perfectly.

Once finished make sure that all joints close
perfectly well all around the door and check
that the internal light turns off when the fridge
door closes. (see Fig. 8)