
Features and benefits
• Compass Pro 
 – Large display and one control knob for easy program selection 
– Language selection
 – Quick selection and option buttons for the most frequently used 
 wash programs and options
• AWS – Automatic Savings: 
 – The machine weighs the linen and adjusts the amount of water  
 and energy according to the load. This leads to considerable   
 savings in case the machine is not fully loaded. 
 (Available on general programs)
• Extremely low water and energy consumption – see table below
• Four compartment detergent box for manual dosing of powder or 
liquid detergent
• High extraction force for efficient dewatering
•  Door with gasket and strong hinges built for heavy duty operation
•  Stainless and galvanized steel in all vital parts for high degree of  
rust protection
• Power Balance:
 – Maximises the extraction force, leading to highest dewatering and 
 savings in drying 
 – Minimizes the stress on the machine, leading to trouble-free 
 operation and increased machine lifetime
 – Reduces vibrations, making it possible to install the machine in all 
 locations
®  
microprocessor offers:
PROFESSIONAL LAUNDRY
Washer extractor
W5300H
Images shown are a representation of the product only and 
variations may occur.
Main options
• Automatic liquid detergent supply (optional I/O board)
• Connection to booking- /payment- system or coin meter
Main specifications 
Max. capacity filling factor 1:9    kg/lb 
Drum, volume    litre/ft3 
  diameter    ø mm/inch 
Extraction    rpm 
G-factor     
Standard heating alternatives  electricity  kW 
  steam 
  non-heated 
Modified energy factor**** 
Water factor****
Consumption data 6S03/6L33  
”Warm” *
Total time      min 
Water consumption (cold+hot)    litre/gallon 
Energy consumption (motor/heating/hot water)  kWh 
Steam consumption    kg/lbs 
Residual moisture    %
* Water temperature 59°F cold water and 149°F hot water. 
** Programs with AWS. 
*** Depending on steam pressure. 
**** The figures are based on theoretical calculations and not lab tests, with AWS program.
Certified in accordance with ISO 9001 and ISO 14001 and approved IP 24D. Certified in accordance with UL/ETL standards.
 El  Steam***
 Full load, 33 kg / 75 lb Half load**, 16.5 kg / 37.5 lb  Full load, 33 kg / 75 lb Half load**, 16.5 kg / 37.5 lb
  27 25 27 25 
 190/50 + 17/5  93/25 + 8/2  207/55 + 0/0  101/27 + 0/0 
 0.35/2.35/1.05 0.35/1.15/0.5  0.35/-  0.35/- 
 -  -  5.1/11.2 2.5/5.5 
 50  51  50  51
W5300H
33/75 
300/10.6 
795 / 31 5/16 
950 
400 
19.8 / 21.0 / 23.0 
x 
x 
2.4 
3.9

Electrical connections 
Heating  Main voltage    Heating  Total  Recommended 
alternative    power power  ITCB 
    Hz kW kW  A
  208-240V 3 ~  60  19.8/23.0  20.6/23.8  70/80 
Electric heated 
  440V 3 ~  60  21.0/23.0  21.8/23.8  40/50 
  480V 3 ~  60  22.8/23.0  21.8/23.8  40
Steam or 
  120V 1 ~  60  -  3.0  35 
Non heated           
  208-240V 1/3 ~ 60  -  3.0  20 
  400/480V 1/3 ~ 60  -  3.0  15
3
1
2
Water and steam connection   
Water valves  DN/inch 
Water pressure  psi 
Capacity at 300 kPa  l/min 
Drain valve  ø mm/inch 
Draining capacity  l/min 
Steam valve  DN/inch 
Steam pressure  psi 
Liquid detergent supplies 
Floor requirements
Frequency of the dynamic force  Hz 
Floor load at max extraction  kN
Sound levels
Sound pressure level*   
Wash dB(A) 
Extraction dB(A)
Heat emission
% of installed power, max
Shipping data**
Weight  net, kg/lbs 
Shipping volume  m
3
3
/ft
Accessories
Steel base 
Hose kits for water or steam 
Fluff collector
Dimensions in mm/inch
A Width 
B Depth 
C Height 
D  
E  
F  
G 
H 
I 
J 
K 
L 
M 
N 
O
1 Operating panel  
2 Door opening ø 435 mm / 
 17 1/8 inch   
3 Detergent box  
4 Cold water  
5 Hot water
Front and side panels in light grey and blue (RAL 260 70 05, 250 60 30) 
* A-weighted emmission sound pressure level at workingstations. 
** Average data. Crated weight/shipping volume depends on configuration. 
 Please contact logistics for exact measures.
 6 Re-used water  
 7 Drain  
 8 Liquid detergent supply 
 9 Electrical connection 
 10 Steam connection 
W5300H
20 / 3/4 
30-90 
60 
75 / 3 
170 
15 / 1/2 
7-40 
5
15.8 
6.2 ± 1.3
<70 
84
5
560 / 1235 
2.04 / 72
x 
x 
x
1020 / 40 3/16 
1134 / 44 5/8 
1462 / 57 9/16 
556 / 21 7/8 
1689 / 66 1/2 
1165 / 45 7/8 
135 / 5 5/16 
1364 / 53 11/16 
402 / 15 13/16 
302 / 11 7/8 
1324 / 52 1/8 
1244 / 49 
333 / 13 1/8 
100 / 3 15/16 
359 / 14 1/8 
10
C
Front
E
D
B
Side view
I
G
5
J
4
6
9
8
H
F
K
L
N
www.electrolux.com/professional
Share more of our thinking at www.electrolux.com
M
7
Rear
O
Art. No. 438919500US/2016.02.02
We reserve the right to alter specifications without notice.