Electrolux FM 2500DD-A User Manual
INSTRUCTION BOOK
FM 2500DD-A
949 601 706325 88-8514 rev. 6-437GB
2
Your New Appliance
Thank you for purchasing an AEG appliance.
To enable you to use your new appliance efficiently and safely, please read this
instruction book carefully before installing or using the appliance, and retain for
future reference. Should the appliance be transferred to a new owner please
ensure this instruction book is left with the appliance in order that the new owner
can get to know the functions of the appliance and the relevant warnings.
If you require further assistance or advice, please contact our Customer Care
Department either by letter or telephone:
Customer Care Department
AEG Domestic Appliances
55-77 High Street
Slough
SL1 1DZ
Tel: 08705 350350*
* calls to this number may be recorded for training purposes
3
Contents Page No.
For the user
Your New Appliance ........................................................................................ 2
Safety information .......................................................................................... 5
Product description ........................................................................................ 7
Downdraught Extractor .......................................................................... 8
Height positions .................................................................................... 8
Extraction rates ...................................................................................... 8
Electronic control system ...................................................................... 8
How to use it .................................................................................................... 9
Downdraught Extractor .......................................................................... 9
Finger touch .......................................................................................... 9
Downdraught Extractor .......................................................................... 10
Extraction rates ...................................................................................... 13
Intensive extraction ................................................................................ 14
Timer-controlled switching off .............................................................. 15
Autostop ................................................................................................ 16
Correct ventilation .................................................................................. 17
Cleaning and maintenance ............................................................................ 18
Aluminium ............................................................................................ 18
Ceramic hob .......................................................................................... 18
Top cabinet .............................................................................................. 18
Extraction shaft ...................................................................................... 19
What to do if .................................................................................................... 31
Service and spare parts .......................................................................... 33
4
Contents Page No.
For the electrician
Unpacking ...................................................................................................... 20
Technical data ................................................................................................ 21
Installation........................................................................................................ 22
Mounting ........................................................................................................ 26
How to read the operating instructions
1... 2...
Step by step
Safety information
The products are continuously being developed and it may occur that some product specifications
are changed after this instruction book was printed. We therefore have to make reservation for any
changes or printing errors.
Hints and tips
Environmental information
5
Safety Information
Keep an eye on children when the
downdraught extractor is in use.
Never let children touch or play with
the control knobs.
Never leave the downdraught extractor unattended when deep-frying or
melting fat, paraffin wax or other
easily ignited substances. Do not
flambe in the immediate proximity
of a downdraught extractor that is
switched on. It can cause a fire. In
the event of fire, the downdraught
extractor must be switched off.
Put out the fire with a lid. Never
use water.
Check that the downdraught extractor is turned off when not in use.
This downdraught extractor is
designed for use in a normal domestic household. If used in any other
way there could be a risk of an accident.
Children
Use
For hygiene and safety reasons the
downdraught extractor must be kept
clean. In a worst case scenario, a
clogged fat filter can ignite and burst
into flames.
Service and repair must be performed by our service organisation
or an organisation approved by us.
Only spare parts supplied by our
service organisation may be used.
Make sure the packaging is disposed
of in such a manner that children
cannot access the used packaging.
Cleaning and Maintenance
Service
Unpacking
6
The downdraught extractor may only
be installed by an authorised electrician or someone approved by the
manufacturer.
Work carried out by unqualified persons can lead to personal injury
and/or damage to property and may
damage the downdraught extractor.
During installation make sure the
electricity cable is not pinched.
Do not interfere with the downdraught extractor electrical parts.
Extracted air must not be connected
to a duct that is already used to discharge flue gases from an oil-fired
boiler or similar.
Help to avoid accidents when throwing out the downdraught extractor.
Remove the electricity cable from
the wall socket and cut it off close to
the downdraught extractor.
Installation
Disposal
7
Product Description
Control Panel
1. On/off
2. Raise the downdraught extractor
3. Lower the downdraught extractor
4. Set the extraction rate
5. Intensive extraction
6. Minute timer
7. Extraction rate display
8. Minute display
32 4
7
5
8
61
8
Downdraught Extractor
The air is sucked in at the air
dampers through the fat filter and is
then blown via the extraction hose to
the extraction duct and out into the
open air.
Height positions
The downdraught extractor has 4
different extraction strengths:
150m3/h, 220m3/h, 345 m3/h and
480 m3/h.
When installed beside a gas
appliance, the downdraught extractor can only
extract in the top position.
Extraction rates
When installed beside electrical
appliances, the downdraught extractor can be adjusted continuously
from the centre position to the top
position.
The downdraught extractor has an
electronic control system.
The electronics have the following
functions:
- Extraction rate display
- Timer-controlled operation
- Autostop
- Grease filter cleaning indicator
Electronic control system
9
How to use
Downdraught Extractor
Never leave the downdraught extractor unattended
when deep-frying or melting
fat or other easily ignited
substances. Do not flambe
food in the immediate proximity of a downdraught
extractor that is switched on.
This can cause fire.
In the event of fire, the
downdraught extractor must
be switched off.
Put out the fire with a lid.
Never use water.
Finger Touch
The buttons have to be touched for
at least 1 second before they are
activated.
If the buttons are touched for more
than 10 seconds, the downdraught
extractor will be switched off automatically. If two buttons are touched
at the same time, neither of the settings is registered, apart from resetting the indicator for cleaning the fat
filter.
The downdraught extractor can
always be switched off by pressing
the
k
button.
10
Downdraught Extractor
1. To turn the downdraught extractor
on, press
k
.
2. To select the height position, press
m
.
The downdraught extractor will
move to middle position and switch
on at extraction rate 1.
To turn the downdraught extractor
off, hold
l
down until bottom
position has been reached.
Pressing
k
will turn extraction off,
but the downdraught extractor will
remain where it is and not descend
into the worktop.
Height positions
Installation beside electrical appliances
The downdraught extractor is
variable between the middle and top
position.
Raising
The downdraught extractor is
switched on.
Select the height position within 10
seconds.
1. Press
m
.
The downdraught extractor will
move to middle position. The
dampers are deployed.
2. Press
m
again.
11
The downdraught extractor will then
stop rising automatically when the
button is released or when top position is reached.
Safety
If the downdraught extractor is
obstructed when raising, it will
switch off automatically.
Lowering
1. Press
l
.
If you keep pressing
l
, the downdraught extractor will move steplessly between the top and bottom position. It will stop when you release
the button.
When the middle position is reached,
the dampers retract and extraction is
turned off.
Installation beside gas appliances
The downdraught extractor can only
extract in top position.
12
Raising
When the downdraught extractor is
switched on.
Select the height position within 10
seconds.
1. Press
m
.
The downdraught extractor will
move to top position and switch on
at extraction rate 1. The dampers
will deploy on the way up.
Safety
If the downdraught extractor is
obstructed on the way up, it will
switch off automatically.
Lowering
1. Press
l
.
Extraction will be turned off. The
downdraught extractor will stop
when you release the button.
Pressing
k
will turn extraction off,
but the downdraught extractor will
remain where it is and not descend
into the worktop.
Loading...