For your safety and correct operation
of the appliance, read this manual
carefully before the installation and use.
Always keep these instructions with the
appliance also if you move or sell it.
The users must fully know the operation and safety functions of the appliance.
Children and vulnerable people safety
Warning! Do not let persons, children
included, with reduced physical
sensory, reduced mental functions or
lack of experience and knowledge to
use the appliance. They must have
supervision or instruction for the
operation of the appliance by a person
who is responsible for their safety.
• Keep all packaging away from children.
There is the risk of suffocation or injury.
• Keep the children away from the appliance during and after the operation, until
the appliance is cold.
Warning! Activate the child safety
device to prevent small children and
pets from an accidental activation of
the appliance.
Safety during operation
• Remove all packaging, stickers and layers from the appliance before the first
use.
• Set the cooking zones to "off" after each
use.
•The Risk of burns! Do not put cutlery or
saucepan lids on the surface that you
cook, as they can become hot.
Helpful hints and tips 6
Care and cleaning 7
What to do if… 8
Environment concerns 8
Subject to change without notice
Warning!Fire risk! Too hot fats and
oils can occur with ignition very quickly.
Correct operation
• Always monitor the appliance during operation.
• The appliance is only for domestic use!
• Do not use the appliance as a work or a
storage surface.
• Do not put or keep very flammable liquids
and materials, easy fusible objects (made
of plastic or aluminium) on or near the
appliance.
• Be careful when you connect the appliance to the near sockets. Do not let the
electricity bonds touch the appliance or
hot cookware. Do not let the electricity
bonds to tangle.
How to prevent a damage to the
appliance
• If the objects or cookware fall on the
glass ceramic, the surface can be damaged.
• Cookware made of cast iron, cast aluminium or with damaged bottoms can
cause scratch of the glass ceramic. Do
not move them on the surface.
• Do not let cookware boil dry to prevent
the damage to cookware and glass.
• Do not use the cooking zones with empty
cookware or without cookware.
• Do not put the aluminium foil on the appliance.
Warning! If there is a crack on the
surface, disconnect power supply
to prevent the electrical shock.
INSTALLATION INSTRUCTIONS
Before the installation, note down
the serial number (Ser. Nr.) from the
rating plate.The rating plate of the
appliance is on its lower casing.
58 HAD 03 AO
Electrolux
EHS60041P
220-240 V 50-60 Hz
The Safety Instructions
Warning! You must read these!
• Make sure that the appliance is not damaged because of transportation. Do not
connect a damaged appliance. If it is
necessary, speak to the supplier.
• Only an authorized servicing technician
can install, connect or repair this appliance. Use only original spare parts.
• Only use the built-in appliances after you
assemble the appliance into correct builtin units and work surfaces that align to
the standards.
• Do not change the specifications or
change this product. Risk of injury and
damage to the appliance.
• Fully obey the laws, ordinances, directives and standards in force in the country where you use the appliance (safety
regulations, recycling regulations, electrical safety rules etc.)!
• Keep the minimum distances to other appliances and units!
• Install shock protection, for example install the drawers only with a protective
floor directly below the appliance!
• Keep safe the cut surfaces of the worktop from moisture with a correct sealant!
• Seal the appliance to the work top with
no space between with a correct sealant!
949 594 275 00
6,4 kW
electrolux 3
• Keep safe the bottom of the appliance
from steam and moisture, e.g. from a
dishwasher or oven!
• Do not install the appliance adjacent to
doors and below windows! If not, when
you open the doors or windows they can
push off hot cookware from the appliance.
Warning! Risk of injury from electrical
current. Carefully obey the instructions
for electrical connections.
• The electrical mains terminal is live.
• Make electrical mains terminal free of
voltage.
• Install correctly to give shock protection.
• Loose and incorrect plug and socket
connections can make the terminal become too hot.
• A qualified electrician must install the
connections in the clamps correctly.
• Use a strain relief clamp on cable.
• Use the correct mains cable of type
H05BB-F Tmax 90°C (or higher) for a single phase or two phase connection.
• Replace the damaged mains cable with a
special cable (type H05BB-F Tmax 90°C;
or higher). Speak your local Service Centre.
The appliance must have the electrical installation which lets you disconnect the appliance from the mains at all poles with a
contact opening width of minimum 3 mm.
You must have correct devices to isolate:
line protecting cut-outs, fuses (screw type
fuses removed from the holder), earth leakage trips and contactors.
4 electrolux
Assembly
min.
50mm
min.
500mm
min.
50mm
min.
28 mm
R 5mm
600mm
=
490
+1
mm
=
560
+1
mm
min.
25 mm
min.
20 mm
If you use a protection box (the additional accessory), the protective floor
directly below the appliance is not necessary.
PRODUCT DESCRIPTION
General overview
12
electrolux 5
145 mm
180 mm
1 Cooking zone 1200 W
2 Cooking zone 1800 W
3 Cooking zone 1200 W
4 Control panel
5 Double cooking zone 750/2200 W
120/210 mm
5
145 mm
3
4
Control panel layout
13
4
2
Use the sensor fields to operate the appliance. The displays and indicators tell
which functions operate.
sensor fieldfunction
1
2
3
4
/
Heat setting displayIt shows the heat setting.
It activates and deactivates the appliance.
It increases or decreases the heat settings.
It activates and deactivates the outer ring.
Heat setting displays
DisplayDescription
-
The cooking zone is deactivated.
The cooking zone operates.
There is a malfunction.
A cooking zone stay hot (residual heat).
Lock/The Child safety device operates.
6 electrolux
DisplayDescription
The Automatic Switch Off operates.
Residual heat indicator
Warning! The risk of burns from
residual heat!
OPERATING INSTRUCTIONS
Activation and deactivation
Touch
for 1 second to activate or deac-
tivate the appliance.
Automatic Switch Off
The function stops the hob
automatically if:
•
all cooking zones are off
.
• you do not set the heat setting after you
start the hob.
Automatic Switch Off times
Heat setting
Stops after6 hours5 hours4 hours1.5 hours
- - -
The heat setting
Touch
Touch
to increase the heat setting.
to decrease the heat setting. The
display shows the heat setting. Touch
and at the same time to deactivate the
cooking zone.
Activation and deactivation of the outer
ring
You can adjust the surface you cook to the
dimension of the cookware.
To activate the outer ring touch the sensor
. The indicator comes on.
field
Do the procedure again to deactivate the
outer ring. The indicator goes out.
The child safety device
This function prevents an accidental operation of the appliance.
To activate the child safety device
•
Activate the appliance with
. Do not
set the heat settings.
• you cover a sensor field with an object (a
pan, a cloth, etc.) for longer than 10 seconds. Remove the object or clean the
control panel.
• you do not stop a cooking zone or
change the heat setting after some time.
See the table.
•
Touch
comes on.
of the two front cooking zones
for 4 seconds. The symbol
•
Deactivate the appliance with
To deactivate the child safety device
•
Activate the appliance with
set the heat settings. Touch
two front cooking zones for 4 seconds.
The symbol
•
Deactivate the appliance with
comes on.
To override the child safety device for
only one cooking time
•
Activate the appliance with
comes on.
bol
•
Touch
of the two front cooking zones
for 4 seconds. Set the heat setting in10 seconds. You can operate the appliance.
• When you deactivate the appliance with
, the child safety device operates
again.
comes on.
.
. Do not
of the
.
. The sym-
HELPFUL HINTS AND TIPS
Cookware
• The bottom of the cookware must
be as thick and flat as possible.
• Cookware made of enamelled steel
and with aluminium or copper bottoms can cause the colour change
on the glass-ceramic surface.
electrolux 7
Energy saving
• If it is possible, always put the lids on
the cookware.
• Put cookware on a cooking zone before you start it.
• Stop the cooking zones before the
• The bottom of pans and cooking
zones must have the same dimension.
9Boil large quantities of water, cook pasta, sear meat (goulash, pot roast), deep-fry chips
Information on acrylamides
Important! According to the newest
scientific knowledge, if you brown food
(specially the one which contains starch),
Use to:TimeHints
quired
5-25
min
min
25-50
min
min
min
60-150
min
as necessary
5-15
min
Put a lid on a cookware
Mix from time to time
Cook with a lid on
Add the minimum twice as much
liquid as rice, mix milk dishes part
procedure through
Add some tablespoons of liquid
Use max. ¼ l water for 750 g of potatoes
Up to 3 l liquid plus ingredients
Turn halfway through
Turn halfway through
acrylamides can pose a health risk. Thus,
we recommend that you cook at the lowest
temperatures and do not brown food too
much.
CARE AND CLEANING
Clean the appliance after each use.
Always use cookware with clean bottom.
Warning! The sharp objects and
abrasive cleaning agents can cause
damage to the appliance.
For your safety, do not clean the appliance with steam cleaners or high-pressure cleaners.
Scratches or dark stains on the glassceramic cause no effect on how the
appliance operates.
8 electrolux
To remove the dirt:
1. – Remove immediately:melted plas-
tic, plastic foil, and food with sugar. If
not, the dirt can cause damage to the
appliance. Use a special scraper for
the glass . Put the scraper on the
glass surface at an acute angle and
rings, fat stains, shiny metallic discolorations. Use a special cleaning agent
for glass ceramic or stainless steel.
2. Clean the appliance with a moist cloth
and some detergent.
3. At the end rub the appliance dry with
a clean cloth.
move the blade on the surface .
Remove after the appliance is suf-
–
ficiently cool:limescale rings , water
WHAT TO DO IF…
ProblemPossible cause and remedy
You cannot activate the appliance or operate it.
The appliance deactivates.
The residual heat indicator
does not comes on.
You cannot activate the outer
ring.
The sensor fields become hot.The cookware is too large or you out it too near to the controls.
comes on
and number comes on.
If you tried the above solutions and cannot
repair the problem, speak to your dealer or
the customer service. Give the data from
the rating plate, three digit letter, code for
the glass ceramic (it is in the corner of the
glass surface) and an error message that
comes on.
• Activate the appliance again and set the heat setting in 10 seconds.
• You touched 2 or more sensor fields at the same time. Only
touch one sensor field.
• The Child Safety Device operates. See the chapter Operating
instruction..
• There is water or fat stains on the control panel. Clean the control panel.
You put something on the . Remove the object from the sensor field.
The cooking zone is not hot because it operated only for a short
time. If the cooking zone should be hot, speak to the service centre.
Activate the inner ring first.
Put large cookware on the rear cooking zones if it is necessary.
The Automatic Switch Off operates. Deactivate the appliance and
activate it again.
There is an error in the appliance.
Disconnect the appliance from the electrical supply for some
time. Disconnect the fuse from the electrical system of the house.
Connect again. If
tre.
comes on again, speak to the service cen-
Make sure, you operated the appliance correctly. If not the servicing by a customer
service technician or dealer will not be free
of charge, also during the warranty period.
The instructions about the customer service
and conditions of guarantee are in the guarantee booklet.
ENVIRONMENT CONCERNS
The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
human health, which could otherwise be
electrolux 9
caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please
contact your local council, your household
waste disposal service or the shop where
you purchased the product.
Packaging material
The packaging materials are friendly to
the environment and can be recycled.
The plastic components are identified
by marking: >PE<,>PS<, etc. Discard
the packaging materials as household
waste at the waste disposal facilities in
your municipality.
10 electrolux
electrolux 11
www.electrolux.com/shop
892934388-A-482010
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.