Electrolux ECRT66L240 User Manual

ITEM #
MODEL #

Warewashing

Green&Clean 66" Multi Tank High

Temp Conveyor Dishwasher with

Energy Saving Device

Warewashing
Green&Clean 66" Multi Tank High Temp

Conveyor Dishwasher with Energy Saving
Device

534034
(ECRT66R208)

534035
(ECRT66L208)

534036
(ECRT66R240)

534037
(ECRT66L240)

66" Conveyor Dishwasher with Built-in Booster
& Energy Saving Device. Right to Left - 208V

66" Conveyor Dishwasher with Built-in Booster
& Energy Saving Device. Left to Right - 208V

66" Conveyor Dishwasher with Built-in Booster
& Energy Saving Device. Right to Left - 240V

66" Conveyor Dishwasher with Built-in Booster
& Energy Saving Device. Left to Right - 240V

Short Form Specification

Item No.

Unit to be Electrolux ECRT66 Hot Water Sanitizing 66" (1684 mm) multi tank conveyor
dishwasher with Energy Saving Device and Wash-Safe Control. Electrical characteristics
to be 208V or 240V three phase operation. Unit to operate from left to right or right to
left. Energy Star 2.0 certified product. Atmospheric built-in booster system with built­in rinse booster pump thus guaranteeing rinse pressure during rinse cycle. Built in
Energy Saving Device (ESD). ESD permits the unit to operate with cold water in the
range 50°-86° F (10°-30° C). 2 conveyor speeds which can be selected from the control
panel by the operator, 100 racks/hour or 200 racks/hour. Maximum water consumption
at 200 racks/hour of only 79 gal/hour (300 L/hour) equivalent of 0,4 gal/rack (1,5 L/
rack). Large heat and noise insulated front counter balanced door for easy access of
internal components. Powerful 2.55 HP (1,9kW) wash pump and specially designed
wash spray arms to guarantee cleaning. Unit to feature as standard end of day self
cleaning cycle. Drain of water from the machine can be done through the control panel.
Large deep drawn 26 gal (100 L) wash tank. Covered by Electrolux Platinum Star
Service Program two-year parts and one-year labor warranty, installation start-up and
performance check-up after one year from installation.

NAME #
SIS #
AIA #

Main Features

•Built-in Energy Saving Device (ESD). The ESD is an internal
condenser which utilizes the steam generated by the machine in
the rinse and wash tanks to heat up incoming cold water entering
the booster. The incoming cold water is heated up to approximately
110°F (43°C) and a built in booster will heat this water to 180°F
(82°C) minimum for the final sanitizing rinse.

•Energy Star 2.0 certified product.

•Built-in hot water booster.

•Wash-Safe Control communicates through the LCD display if the

rinsing temperature drops below 180°F (82°C).

•Atmospheric booster system with air break.

•Built in rinse water booster pump guarantees constant rinse

pressure.

•Speed of conveyor can be set through the control panel by the
operator. 100 racks/hr or 200 racks/hr.

•Built-in drain valve in the tank, allows automatic dump and fill
without any interruption of the washing process.

•Large counter balanced inspection door allows unrestricted all
round access to the wash and rinse area. Door is insulated with
injected foam. This adds strength as well as reduces noise and heat
loss.

•Large filters sloping towards the front to the smaller pressed filter
box for quick removal. Filters feature holes smaller than the concave
ant-block wash nozzles so large food cannot enter and block the
wash system.

•Adjustable feet for full access underneath the machine for cleaning.

•Push button self cleaning cycle of the wash and rinse zones for

ease of “end of day” cleaning.

•Wash chamber without internal pipes and therefore no hidden dirt
traps.

•Self draining wash pumps provide maximum hygiene with no
smells and all wash and rinse zones drain automatically at the push
of a button.

•Powerful 2.55 HP (1,9kW) wash pump.

•Heavy duty stainless steel wash pump (impeller and housing).

•Low water consumption. At 200 racks per hour, the machine uses

only 79 gal/hr (300 L/rack) equivalent of 0,4 gal/rack (1,5 L/rack).

•Autostart/stop ensures that the machine runs only when a rack is
passing through it. This reduces both water and energy
consumption.

•Deep drawn pressed 26 gal (100 L) wash tank with fully rounded
corners, sloped towards the drain to prevent dirt build up provides
fast drainage in only a few minutes. Pressed wash tank with no
welded points offer a guaranteed water tight solution.

•Warewasher structure is held together with a solid 2" × 2" stainless
steel tube sub-frame to provide long term sturdiness.

•All main components made in heavy duty anti-corrosive 304 type
Stainless steel: tanks, panels, wash & rinse arms and caps, doors,
front, handle, side panels and rack transportation system.

•Wash and rinse arms can be easily removed for cleaning.

•IPX5 (NEMA4) water protection.

•Internal curtains made of silastic material and are not affected by

detergent or heat.

•Electronic control panel features large display for reading of wash
and rinse temperatures.

Green&Clean 66" Multi Tank High Temp Conveyor Dishwasher

with Energy Saving Device

Warewashing

APPROVAL:

Electrolux Professional, Inc.

www.electroluxusa.com/professional

10200 David Taylor Drive, Charlotte, NC 28262 • Telephone Number: 866-449-4200 • Fax Number: 704-547-7401

Green&Clean 66" Multi Tank High Temp

Conveyor Dishwasher with Energy Saving

Warewashing

Device

•Equipped with table end limit switch for easier installation.

•Machine predisposed for external detergent and rinse aid connections.

•18 1/2" (470mm) charging hole size accepts full, 1/2, 3/4, 1/4 sheet

pans using the optional accesory rack.

Included Accessories

•1 of Kit end limit switch for rack type PNC 864138

Optional Accessories

•Rack for 3 full sheet pans for racktype dishwasherPNC 867029 ❑

Electric

Supply voltage:

534034(ECRT66R208)208 V/3 ph/60 Hz
534035(ECRT66L208)208 V/3 ph/60 Hz
534036(ECRT66R240)240 V/3 ph/60 Hz
534037(ECRT66L240)240 V/3 ph/60 Hz

Warewasher requires two separate electrical service connections.
Connection 1 for Hot Water Booster; Connection 2 for running of the
machine (wash pump, tank heat, conveyor drive motor, rinse booster pump,
electronic control). refer to the information below for Amp requirements.

Booster Electrical Characteristics
Hot Water Booster Minimum Amp

Load Connection 1:208V/3p/60Hz 75A (27 kW)

240V/3p/60Hz 65A (27 kW)

Wash Pump, tank heat Minimum
Amp Load Connection 2:208V/3p/60Hz 58.3A (21 kW)

240V/3p/60Hz 50.5A (21 kW)

Total Amp Load:208V/3p/60Hz 133.4A (48 kW)

240V/3p/60Hz 115.5A (48kW)

Water:

Inlet Water supply pressure:

534034(ECRT66R208)22 - 102 psi (152 - 700 kPa)
534035(ECRT66L208)22 - 102 psi (152 - 700 kPa)
534036(ECRT66R240)22 - 102 psi (152 - 700 kPa)
534037(ECRT66L240)22 - 102 psi (152 - 700 kPa)

Inlet Cold Water Supply Temperature to
booster:50-86°F (10-30°C)

Inlet Hot Water Supply Temperature to
wash/tank:122-149°F (50-65°C)

Inlet Water supply hardness:4-8 gpg (7-14 °fH)
Incoming Cold Water line size (booster):NPT 1/2"
Incoming Hot Water line size (wash and

tank):NPT 1/2''
Drain line size:NPT 1-1/2''
Peak Rate of Drain Flow:91.9 gal/min (348 L/min)
Drain line size (wash/tank):NPT 1-1/2''
Water consumption:79 gal/hr (300 L/hr)
Water consumption/rack:0.4 gal/rack (1.5 L/rack)
Pre wash temperature:<105°F (<40°C)
Pre wash tank size:11.8 gal (45 L)
Pre wash pump power:1/2 hp (0.37 kW)
Pre wash pump water flow:57.5 gal/min (180 L/min)
Wash Temperature: 160-172°F (71-78 °C)
Wash tank size:26 gal (100 L)
Wash pump power:2 1/2 hp (1.9 kW)
Wash pump water flow:118.9 gal/min (450 L/min)
Rinse Temperature:180-194°F (82-90°C)
Rinse pump power:1/2 hp (0.4 kW)
Rinse pump water flow:1.32 gal/min (5 L/min)
Hot water booster capacity:3.17 gal (12 L)
Initial fill water requirements:25.17 gal (112 L)
Initial fill Cold water requirements:11.8 gal (45 L)

Key Information:

Productivity racks per hour (fast speed):200 racks
Productivity racks per hour (low speed):100 racks
Table to Table connection: 66'' (1684 mm)
Number of tanks:2
Height with door open:81 1/4" (2063 mm)
Charging hole size (width):20 7/8'' (530 mm)
Charging hole size (height):18 1/2'' (470 mm)
External dimensions, Width:82 3/8" (2092 mm)
External dimensions, Depth:35 1/16" (890 mm)
External dimensions, Height:71 3/8" (1813 mm)
Net weight:981 lbs (445 kg)
Shipping width:93 5/16" (2370 mm)
Shipping height:81 1/8" (2060 mm)
Shipping depth:41 1/8" (1045 mm)
Shipping weight:1124 lbs (510 kg)
Shipping volume:180.17 ft³ (5.1 m³)
Noise level:<70 dBA

Unit predisposed to accept external detergent dispensers, detergent probes and rinse
aid dispensers.

Air Emission:

Air Flow:106 CFM (180 m3/h)
Air temperature:86°F (30°C)
Air humidity:95% r.h.