|
ITEM # |
|
|
|
MODEL # |
|
|
Warewashing |
|
NAME # |
|
Green&Clean 44" Single Tank High |
|
SIS # |
|
Temp Conveyor Dishwasher with |
|
|
|
|
|
||
Energy Saving Device |
AIA # |
|
|
|
|
|
|
|
|
|
|
Warewashing
Green&Clean 44" Single Tank High Temp Conveyor Dishwasher with Energy Saving Device
534040 |
44" Conveyor Dishwasher with Built-in Booster |
(ECRT44R208) |
& Energy Saving Device. Right to Left - 208V |
534041 |
44" Conveyor Dishwasher with Built-in Booster |
(ECRT44L208) |
& Energy Saving Device. Left to Right - 208V |
534042 |
44" Conveyor Dishwasher with Built-in Booster |
(ECRT44R240) |
& Energy Saving Device. Right to Left - 240V |
534043 |
44" Conveyor Dishwasher with Built-in Booster |
(ECRT44L240) |
& Energy Saving Device. Left to Right - 240V |
Short Form Specification
Item No.
Unit to be Electrolux ECRT44 Hot Water Sanitizing 44" (1125 mm) single tank conveyor dishwasher with Energy Saving Device and Wash-Safe Control. Electrical characteristics to be 208V or 240V three phase operation. Unit to operate from left to right or right to left. Energy Star 2.0 certified product. Atmospheric built-in booster system with builtin rinse booster pump thus guaranteeing rinse pressure during rinse cycle. Built in Energy Saving Device (ESD). ESD permits the unit to operate with cold water in the range 50°-86° F (10°-30° C). 2 conveyor speeds which can be selected from the control panel by the operator, 100 racks/hour or 200 racks/hour. Maximum water consumption at 200 racks/hour of only 79 gal/hour (300 L/hour) equivalent of 0,4 gal/rack (1,5 L/ rack). Large heat and noise insulated front counter balanced door for easy access of internal components. Powerful 2.55 HP (1,9kW) wash pump and specially designed wash spray arms to guarantee cleaning. Unit to feature as standard end of day self cleaning cycle. Drain of water from the machine can be done through the control panel. Large deep drawn 26 gal (100 L) wash tank. Covered by Electrolux Platinum Starâ Service Program two-year parts and one-year labor warranty, installation start-up and performance check-up after one year from installation.
Main Features
∙Built-in Energy Saving Device (ESD). The ESD is an internal condenser which utilizes the steam generated by the machine in the rinse and wash tanks to heat up incoming cold water entering the booster. The incoming cold water is heated up to approximately 110°F (43°C) and a built in booster will heat this water to 180°F (82°C) minimum for the final sanitizing rinse.
∙Energy Star 2.0 certified product.
∙Built-in hot water booster.
∙Wash-Safe Control communicates through the LCD display if the rinsing temperature drops below 180°F (82°C).
∙Atmospheric booster system with air break.
∙Built in rinse water booster pump guarantees constant rinse pressure.
∙Speed of conveyor can be set through the control panel by the operator. 100 racks/hr or 200 racks/hr.
∙Built-in drain valve in the tank, allows automatic dump and fill without any interruption of the washing process.
∙Large counter balanced inspection door allows unrestricted all round access to the wash and rinse area. Door is insulated with injected foam. This adds strength as well as reduces noise and heat loss.
∙Large filters sloping towards the front to the smaller pressed filter box for quick removal. Filters feature holes smaller than the concave ant-block wash nozzles so large food cannot enter and block the wash system.
∙Adjustable feet for full access underneath the machine for cleaning.
∙Push button self cleaning cycle of the wash and rinse zones for ease of “end of day” cleaning.
∙Wash chamber without internal pipes and therefore no hidden dirt traps.
∙Self draining wash pumps provide maximum hygiene with no smells and all wash and rinse zones drain automatically at the push of a button.
∙Powerful 2.55 HP (1,9kW) wash pump.
∙Heavy duty stainless steel wash pump (impeller and housing).
∙Low water consumption. At 200 racks per hour, the machine uses only 79 gal/hr (300 L/rack) equivalent of 0,4 gal/rack (1,5 L/rack).
∙Autostart/stop ensures that the machine runs only when a rack is passing through it. This reduces both water and energy consumption.
∙Deep drawn pressed 26 gal (100 L) wash tank with fully rounded corners, sloped towards the drain to prevent dirt build up provides fast drainage in only a few minutes. Pressed wash tank with no welded points offer a guaranteed water tight solution.
∙Warewasher structure is held together with a solid 2" × 2" stainless steel tube sub-frame to provide long term sturdiness.
∙All main components made in heavy duty anti-corrosive 304 type Stainless steel: tanks, panels, wash & rinse arms and caps, doors, front, handle, side panels and rack transportation system.
∙Wash and rinse arms can be easily removed for cleaning.
∙IPX5 (NEMA4) water protection.
∙Internal curtains made of silastic material and are not affected by detergent or heat.
∙Electronic control panel features large display for reading of wash and rinse temperatures.
APPROVAL:
Electrolux Professional, Inc. www.electroluxusa.com/professional
10200 David Taylor Drive, Charlotte, NC 28262 • Telephone Number: 866-449-4200 • Fax Number: 704-547-7401
Warewashing Dishwasher Conveyor Temp High Tank Single 44" Green&Clean Device Saving Energy with
Warewashing Green&Clean 44" Single Tank High Temp Conveyor Dishwasher with Energy Saving Device
∙Equipped with table end limit switch for easier installation.
∙Machine predisposed for external detergent and rinse aid connections.
∙18 1/2" (470mm) charging hole size accepts full, 1/2, 3/4, 1/4 sheet pans using the optional accesory rack.
Included Accessories
∙ 1 of Kit end limit switch for rack type |
PNC 864138 |
Optional Accessories
∙ Rack for 3 full sheet pans for racktype dishwasher PNC 867029
Electric
Supply voltage: |
|
534040(ECRT44R208) |
208 V/3 ph/60 Hz |
534041(ECRT44L208) |
208 V/3 ph/60 Hz |
534042(ECRT44R240) |
240 V/3 ph/60 Hz |
534043(ECRT44L240) |
240 V/3 ph/60 Hz |
Warewasher requires two separate electrical service connections. Connection 1 for Hot Water Booster; Connection 2 for running of the machine (wash pump, tank heat, conveyor drive motor, rinse booster pump, electronic control). refer to the information below for Amp requirements.
Booster Electrical Characteristics |
|
|
Hot Water Booster Minimum Amp |
|
|
Load Connection 1: |
208V/3p/60Hz |
75A (27 kW) |
|
240V/3p/60Hz |
65A (27 kW) |
Wash Pump, tank heat Minimum |
208V/3p/60Hz |
58.3A (21 kW) |
Amp Load Connection 2: |
|
|
|
240V/3p/60Hz |
50.5A (21 kW) |
|
208V/3p/60Hz |
133.4A (48 |
Total Amp Load: |
kW) |
|
|
240V/3p/60Hz |
115.5A (48kW) |
Water:
Inlet Water supply pressure: |
|
534040(ECRT44R208) |
22 - 102 psi (152 - 700 kPa) |
534041(ECRT44L208) |
22 - 102 psi (152 - 700 kPa) |
534042(ECRT44R240) |
22 - 102 psi (152 - 700 kPa) |
534043(ECRT44L240) |
22 - 102 psi (152 - 700 kPa) |
Inlet Cold Water Supply Temperature |
|
to booster: |
50-86°F (10-30°C) |
Inlet Hot Water Supply Temperature |
|
to wash/tank: |
122-149°F (50-65°C) |
Inlet Water supply hardness: |
4-8 gpg (7-14 °fH) |
Incoming Cold Water line size |
|
(booster): |
NPT 1/2" |
Incoming Hot Water line size (wash |
|
and tank): |
NPT 1/2'' |
Drain line size: |
NPT 1-1/2'' |
Peak Rate of Drain Flow: |
47.6 gal/min (180 L/min) |
Water consumption: |
79 gal/hr (300 L/hr) |
Water consumption/rack: |
0.4 gal/rack (1.5 L/rack) |
Wash Temperature: |
160-172°F (71-78 °C) |
Wash tank size: |
26 gal (100 L) |
Wash pump power: |
2 1/2 hp (1.9 kW) |
Wash pump water flow: |
118.9 gal/min (450 L/min) |
Rinse Temperature: |
180-194°F (82-90°C) |
Rinse pump power: |
1/2 hp (0.4 kW) |
Rinse pump water flow: |
1.32 gal/min (5 L/min) |
Hot water booster capacity: |
3.17 gal (12 L) |
Initial fill water requirements: |
25.17 gal (112 L) |
Key Information:
Productivity racks per hour (fast |
|
|
speed): |
200 racks |
|
Productivity racks per hour (low |
|
|
speed): |
100 racks |
|
Table to Table connection: |
44'' (1125 mm) |
|
Number of tanks: |
1 |
|
Height with door open: |
81 |
1/4" (2063 mm) |
Charging hole size (width): |
20 |
7/8'' (530 mm) |
Charging hole size (height): |
18 |
1/2'' (470 mm) |
External dimensions, Width: |
60 |
3/8" (1533 mm) |
External dimensions, Depth: |
35 |
1/16" (890 mm) |
External dimensions, Height: |
71 |
3/8" (1813 mm) |
Net weight: |
705 lbs (320 kg) |
|
Shipping width: |
74 |
3/16" (1885 mm) |
Shipping height: |
81 |
1/8" (2060 mm) |
Shipping depth: |
41 |
1/8" (1045 mm) |
Shipping weight: |
816 lbs (370 kg) |
|
Shipping volume: |
143.3 ft³ (4.06 m³) |
|
Noise level: |
<70 dBA |
|
Unit predisposed to accept external detergent dispensers, detergent probes and rinse aid dispensers.
Air Emission:
Air Flow: |
106 CFM (180 m3/h) |
Air temperature: |
86°F (30°C) |
Air humidity: |
95% r.h. |
Loading...