Electrolux E48GC76EPS User Manual
48" GAS SLIDE-IN COOKTOP
Configuration
FEATURES
Formed Stainless Steel Platform
Large Professional Skirted Knobs with Bezel
Min-2-Max™Sealed Burner (BTU)
Sealed Power Burner
™
(BTU)
Sealed Precision Burner™(BTU)
Linear Flow Burner Valves
Electronic Ignition with Auto Re-Ignition
Continuous Grates
ACCESSORIES
Griddle
Wok Ring
Simmer Plate
9" Stainless Steel Backsplash – PN# ACCBG09-48SI
Black Gas Valve Knob – PN# 31833302
SPECIFICATIONS
Overall Exterior Dimensions –
Height
Width
Depth
Gas Inlet/ Power Supply Location
LP Gas Conversion Kit
Voltage Rating
Connected Load (kW Rating) @120 Volts
‡
Electrical Cable
Approved for Single Oven Combination Installation*
Shipping Weight (Approx.)
‡ For use on adequately wired 120V, dedicated circuit having 2-wire service with a
separate ground wire. Appliance must be grounded for safe operation.
* Not approved to be used over any Electrolux ICON®Single Wall Oven.
NOTE: Always consult local and/ or national electric and gas codes. Refer to Product
Installation Guide for detailed installation instructions on the web at electroluxicon.com.
Specifications subject to change.
6 Sealed Burners
Yes
6
2 (17,000)
2 (15,000)
2 ( 8,500 – 850)
6
Yes
3
Included
Included
Included
Optional
Optional
7-3/4"
48"
26-1/2"
Right Rear
Included
120V/ 60Hz /15A
0.03
Included
No
200 Lbs.
electroluxicon.com
Six Sealed Burners
Designed for cooking multiple dishes at
varying temperatures, with two17,000 and two
15,000 BTU Sealed Power Burners
™
, and two
8,500 BTU - 850 BTU Precision Burners
™
on
a single cooktop.
Continuous Grates
Continuous grates spread weight over a broad
area, providing an ultrastable cook surface.
Sealed Cooktop Spill-Basin
Cleanup is convenient with a black porcelaincoated area beneath the burners to catch spills.
Vantage Flame
™
The automatic re-ignition feature allows the
ignitors to spark spontaneously should the flame
go out or become severely distorted by a draft,
providing ease-of-mind while cooking.
Designed for the well-lived home.
Gas Slide-In Cooktop
E48GC76EPS
Gas Slide-In Cooktop
E48GC76EPS
High standards of quality at Electrolux Home Products, Inc. mean we are
constantly working to improve our products. We reserve the right to change
specifications or discontinue models without notice.
Electrolux Major Appliances, N.A.
USA
•
250 Bobby Jones Expressway •Augusta, GA 30907 •1-877-4electrolux (1-877-435-3287)
•
electroluxicon.com
CANADA
•
5855 Terry Fox Way •Mississauga, ON L5V 3E4 •1-800-265-8352
•
electroluxicon.ca
E48GC76EPS 01/09 © 2009 Electrolux Home Products, Inc. Printed in the U.S.A.
48" Gas Slide-In Cooktop Specifications
•
Product Weight – 190 Lbs.
•
Voltage Rating –120V / 60Hz/ 15 Amps
•
Connected Load (kW Rating) @120 Volts = 0.03kW
(For use on adequately wired 120V, dedicated circuit having 2-wire
service with a separate ground wire. Appliance must be grounded for
safe operation.)
•
Amps @120 Volts = 0.25 Amps
•
Always consult local and/or national electric and gas codes.
•
Cooktop ships with 3/4" factory regulator.
•
LP Gas conversion kit supplied.
•
Plan installation to have electrical connection, gas shutoff valve, and
pressure regulator accessible from front of cabinet. Locate 120V
grounded outlet and gas supply in a 30"W x 15-1/2"H area on rear wall,
10" above floor and 6" to right from center of cooktop.
•
Overhead cabinetry should not exceed a 13" maximum depth.
•
Allow 30" minimum clearance between top of cooktop and bottom of
unprotected wood or metal overhead cabinetry.
•
Absolute minimum horizontal distance between overhead cabinets
installed to either side of appliance must be no less than maximum width
of appliance.
•
Allow 24" minimum clearance when bottom of wood or metal overhead
cabinet is protected by not less than 1/8" flame-retardant millboard
covered with not less than No.28 MGS sheet steel, 0.015" stainless
steel, 0.024" aluminum or 0.020" copper.
•
Allow 2-1/2" minimum clearance between rear edge of cooktop and
nearest combustible surface above countertop. If required clearance
cannot be maintained, then optional stainless steel backsplash or
noncombustible backsplash material must be used – otherwise
installation will require custom cabinet and countertop dimensions.
•
Allow 10" minimum clearance from edge of cooktop to nearest
combustible wall on either side of unit.
•
It is recommended that drawers not be used beneath cooktop.
•
To reduce risk of fire when using overhead cabinetry, install vent hood
that projects horizontally a recommended minimum of 5" beyond bottom
of cabinets.
•
Gas Slide-In Cooktop model E48GC76EPS is NOT approved to be used
over any Electrolux ICON
®
Single Wall Oven.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxicon.com for detailed instructions.
Optional Accessories
•
9" Stainless Steel Backsplash – (PN# ACCBG09-48SI).
•
Black Gas Valve Knob – (PN# 318313302).
1" m i n .
22"
3
"
min.
25"
Support
platform
1
1
/2" typical
countertop
edge
10"min. to
nearest combustible wall
(either side of unit)
73/4"
46"
48"
24"
Opening to
route gas and
electrical supply
48" min.
13"
max.
cabinet
depth
18"
min.
30" min. for
unprotected cabinet
24" min. for
protected surface
Side inset 5/8"
73/4"
Optional 9" stainless
steel backsplash
(attaches to wall)
48"
261/2"
1
/2"
*If 21/2" clearance can not be maintained, then optional
stainless steel backsplash or noncombustible backsplash
material must be used – otherwise this installation will
require custom cabinet and countertop dimensions
2
1
/2" min. required distance between rear
edge of cooktop and nearest combustible
surface above countertop*
Loading...