Electrolux BOT080GS User Manual

High Productivity Cooking
Gas Tilting Boiling Pan
High Productivity Cooking Gas Tilting Boiling Pan 80lt
595105 (BOT080GS)Gas Tilting Boiling Pan 80
Short Form Specification
Unit to be Electrolux Gas Tilting Boiling Pan 80 liter capacity. All Stainless steel construction, full jacket including heat insulated external paneling. One piece deep drawn cooking vessel in 316 type Stainless steel. Unit shall be floor mounted on two consoles with four adjustable Stainless steel feet. Unit shall include motorized variable tilting of pan and fully insulated and counterbalanced closing lid. Cooking temperature and cooking time can be precisely set through state of the art control panel. Food sensor temperature built into base plate permits precise temperature cooking.
liter – 230 V
ITEM #
MODEL #
NAME #
SIS #
80lt
AIA #
Main Features
Round, tilting kettle is suitable to cook, sauté, poach or
steam all kinds of produce.
Produce is uniformly heated in the base and side walls of
the kettle by steam hot water by an external jacket.
Kettle shall be full jacketed including additional heat-
insulated external paneling.
Cooking vessel (one-piece deep drawn) in 316 Stainless
steel (11 gauge / 3 mm) featuring directional pouring lip. Double-jacket in 316 Stainless steel (14 gauge / 2 mm) designed to operate at a pressure of 21.8 psi (1.5 bar).
The lid, mounted on the cross beam of the unit, shall be
counterbalanced by a special hinge that remains open in all positions.
Lid is double-lined, insulated in 304 AISI Stainless steel.
Steam-source: self-contained with a booster injecting steam
directly into double jacket.
Controls are IPX5 water resistance certified.
Actual cooking/holding temperature can be precisely set
through the control panel.
Actual cooking/holding temperature setting and digital
display.
Cook time settings visible through the digital display
Pressure in double-jacket visible through digital display.
Built in food temperature sensor for precise control of
cooking process.
A SOFT setting for a gentle heat input, for delicate products
thus avoiding undesired spillage.
A HOLD setting where the food is initially cooked then held
at a pre-set temperature.
Firmly fitting insulated cover to reduce cooking time and
save energy costs.
Ergonomic: unique ratio vessel diameter and height; motor-
assisted tilting.
Offset tilting axle for convenient pouring height.
Large directional pouring lip.
Closed heating system – no waste of energy.
Added safety: external heat-insulated paneling.
Smooth large surfaces, easy access for cleaning.
All pan internal surfaces round and polished.
Kettle vessel tilts over 90° for complete emptying/cleaning.
Gas Tilting Boiling Pan 80lt
Optional Accessories
Strainer for tilting boiling pan, 80lt (BOT)PNC 910002
Basket (height 100mm) for boiling pan, 80
& 100lt (BOT,TBOT,BON&S90)
PNC 910022
High Productivity Cooking
APPROVAL:
Electrolux Professional
www.electrolux.com/foodservice
foodservice@electrolux.com
High Productivity Cooking
Gas Tilting Boiling Pan
80lt
CWI=Cold Water inlet
EI=Electrical connection
G=Gas connection
Front
Electric
Supply voltage:
595105(FURCOEOOOO)230 V/1N ph/50/60 Hz
Total Watts:0.2 kW
Gas
Gas Power:61362 Btu/hr (18 kW) Gas Type Option:Butane/Propane;Natural Gas Gas Inlet:1" NPT Natural gas - Pressure:7" w.c. (17.4 mbar) LPG Gas Pressure:11" w.c. (27.7 mbar)
Key Information
Top
HWI=Hot water inlet
Side
Distance to floor of pouring lip when tilted:376 mm
Working Temperature MIN:50 °C Working Temperature MAX:100 °C Pan useful capacity:80 lt Vessel (round) diameter:579 mm Vessel (round) depth:385 mm Net weight:195 kg Shipping weight:215 kg Shipping height:800 mm Shipping width:1200 mm Shipping depth:900 mm Shipping volume:0.86 m³
No clearance needed on rear sides of unit if wall is of non combustible type. If wall is combustible, minimum 50 mm wall clearance should be maintained.
Water fill faucet/ shower to be mounted close to unit for filling and cleaning (not supplied).
High Productivity Cooking
Gas Tilting Boiling Pan 80lt
The company reserves the right to make modifications to the products
without prior notice. All information correct at time of printing.
2009.10.15
Loading...