Electro-Harmonix Mole Instruction Manual

MOLE

Bass Booster

Congratulations on your purchase of the MOLE. The small enclosure insures a pedal board friendly fit while
delivering a bass boost that is powerful and defined.

The

MOLE

is an Analog bass booster in a compact Nano pedal. It was specifically designed for the bass player
who is looking for simple control that delivers a bass character that cannot be found in their bass or amplifier
alone. Up to 20 dB of Bass frequency boost is possible allowing any bass to take on the character of numerous
bass and amplifier combinations. It also works well with guitar to tailor a darker but musical tone from treble

MOLE

pickups. With a little experimenting you will see that the
setup and a solid foundation on other instruments.

- THEORY OF OPERATION -

CONTROLS

Plug your Instrument into the
then plug the DC adaptor into a wall outlet. The

MOLE

comes provided with a 9 volt battery.

There are only two controls on the
rotary Boost knob reacts like a specific frequency boost control. The single knob is really a preamp gain. The
higher the Boost knob is turned up the more gain is applied ranging from a thickened bottom end to a powerful
overdrive push to your amp. At the maximum setting you receive 20 dB of gain in the preselected 200 Hz bass
frequency range (the boost stops at 400 Hz). Understanding the setup of between the
is critical. When setting up for the first time, be careful with the Boost control. Experiment with the interaction of

MOLE

the
instrument. Once you understand the correct interaction between your instrument and amplifier you will see the
huge and varied potential that the

To hear demos by rock stars on all EH pedals visit us on the web at www.ehx.com.
Email us at [e-mail]

and your amplifier at different settings. You will learn the settings that react best with your

WARNING: For long term use, it is advised that you use an optional
Electro- Harmonix 96DC-200 adapter with the MOLE. Do not use any
other DC adapters. Using other DC adapters, even those
Electro-Harmonix, could cause harm to the unit, the adapter or you.
The Mole can also be used with 9 volt batteries.

INPUT

jack of your amplifier. Plug the DC adaptor into the

STATUS

MOLE

. The on/off footswitch engages and disengages the

MOLE

provides.

opens thunderous new horizons to your bass

96DC-200

LED indicates when the effect is switched on. The

made by

MOLE

MOLE

and your amplifier

jack and

and the