ELECTROCOMPANIET EMC 1 MKV Owner's Manual

EMC 1 MKV

EMC 1 MKV

Reference CD player

Owner's Manual

EN

ENGLISH

EMC 1_MKV.indd 1 21.11.2019 17:16:39

Welcome to the world of Electrocompaniet!

We thank you for choosing an Electrocompaniet high-end product.

At Electrocompaniet we are relentlessly focused on developing
audio equipment that is capable of bringing the fabulous
experience of the concert hall into the very heart of your home.

Our aim when developing and testing new products is to ensure
that the wonderful richness of tone and every nuance of feeling
and emotion of a piece of music is delivered to you just as the
artist intended.

We continually strive to give you the very best musical listening
experience available whatever your preferred musical genre.

Sincerely yours,
The Electrocompaniet team

2

EMC 1_MKV.indd 2 21.11.2019 17:16:39

Warning:

To avoid risk of fire or electric shock, do not expose this appliance to rain or moisture.
Verify line voltage before use. Do not remove cover. No user serviceable parts inside.
Refer servicing to qualified service personal. The warranty is void if the product is tampered
with by non-authorised personnel. Use only authorized Electrocompaniet service centers.

The contents of the carton

• 1 pc.

• 1 pc.

• 1 pc.

• 2 pcs.

• 1 pc.

• 2 pcs.

• 1 pc.

• 1 pc.

EMC 1 MKV Reference CD player
AC main cord
IR Remote control
AAA Batteries for remote control
CD clamp
Allen keys for securing of the Mechanical Cancellation System.
Owner’s manual
Inspection card

Unpacking the EMC 1 MKV

Immediately upon receipt of the EMC 1 MKV CD player, inspect the carton for possible
damage during shipment. The carton and packaging have been designed to provide the
safest possible protection for transport of your EMC 1 MKV. Unpack the unit carefully.
Save all packaging materials for future shipment.

Important Notice

The transport screws must be removed for proper operation. When moving the CD player.
Always re-insert and tighten the transport screws to avoid severe damage to the unit!

For optimal sonic performance, the EMC 1 MKV should be burned in for a minimum time
of 72 hours. The easiest way to burn in your EMC 1 MKV is to put a disc in REPEAT mode
with the rest of your system turned off. In daily operation, switch off the CD player by using
the STANDBY button on the remote. If the CD player has been switched off, allow two
hours of warm-up to optimize sonic performance. Proper ventilation is important. Please
refer to page 4 for removal of the CD transport screws.

3

EMC 1_MKV.indd 3 21.11.2019 17:16:39

Setup procedure

How to remove a CD transport screws.

1. Remove the two wing bolts and the
wing nut located underneath the unit.

2. Unscrew the Allen screws holding
the gold sign marked «Reference CD
player » with the smallest Allen key
and remove the transport lock bracket.

Remove

Remove

Remove

3. To loosen the transport screw located underneath the golden sign, use the largest Allen key
and unscrew counter clockwise for about 10 turns. Do not remove this Allen screw.

4. Put the golden sign back and fasten it whith the Allen screws.

Important Notice

Keep Allen keys and all transport necessities in a safe place for future use. Always tighten
the transport screw on top first, then the wing nut and wing bolts when moving the CD Player.
The cancellation system weights close to six kilograms alone. If not securely fastened, the
CD player will be severely damaged, resulting in void of warranty. Do not over-tighten the
transport screws.

4

EMC 1_MKV.indd 4 21.11.2019 17:16:39