Eldes EWD2 User Manual
EWD2
WIRELESS MAGNETIC DOOR CONTACT/
SHOCK SENSOR/FLOOD SENSOR
User manual v1.6
Compatible with:
• ESIM264 v7.14.03 and up + EWT1 v16.18 and up.
• ESIM364 v02.06.05 and up.
• EPIR2 v01.01.12 and up.
• EPIR3 v01.00.02 and up
Main features:
• Built-in shock sensor
• 2 wireless zones
• Available zone modes: magnetic door contact, shock sensor, ood sensor, digital sensor
• 2 built-in tamper switches: on the front and on the back of the PCB
• Bult-in temperature sensor
EWD2 is a wireless device intended to secure doors, windows or any other opening/clsoing mechanisms. In addition, the device comes
equiped with a built-in shock sensor for vibration detection, an on-board zone terminal designed for external digital sensor or ood sensor
connection and 2 built-in tamper switches for EWD2 sabotage detection. In order to start using EWD2, it has to be paired with ELDES alarm
system using ELDES Conguration Tool software or by sending a corresponding SMS text message to ELDES alarm system.
ESIM264, EPIR2 and EPIR3 alarm systems support up to 16 EWD2 devices, while ESIM364 - up to 32 EWD2 devices. The maximum wireless
connection range is 150m (492.13ft) (in open areas).
NOTE: For complete information on device operation with ELDES alarm system, please refer to ELDES alarm system installation manual
located at www.eldes.lt/download
1. CONTENTS OF PACK
Item Quantity
1. EWD2. ..................................................... 1
2. Magnet.. .................................................1
3. 1,5V Alkaline AAAA type batteries ...2
4. Screws... ................................................4
5. User manual...... .................................... 1
6. Double-sided adhesive tape ..............2
2. TECHNICAL SPECIFICATIONS
2.1. Electrical and Mechanical Characteristics
Batteries ........................................................... 1,5V Alkaline AAAA type, LR8D425 (IEC) / 25A (ANSI/NEDA)
Number of batteries ....................................... 2
Battery operation time .................................. ~18 months*
Wireless band .................................................. ISM868/ISM915
Wireless communication range ................... Up to 30m (98.43ft) in premises; up to 150m (492.13ft) in open areas
Range of operating temperatures ..............-20…+55 °C (-4... +131°F)
Humidity .......................................................... 0-90% RH @ 0... +40°C (0-90% RH @ +32... +104°F) (non-condensing)
EWD2 dimensions .......................................... 102x22x19mm (4.01x0.87x0.75in)
Magnet dimensions ........................................ 47x17x10mm (1.85x0.67x0.39in)
Compatible with alarm systems ...................ELDES wireless
* The operation time might vary in dierent conditions.
2
2 EN
EWD2 Manual v1.6
2.2 Main Unit and LED Functionality
1
FRONT SIDE
COM
Z
TAMP1 DETECT
+ -
+ -
RESET
LED
BACK SIDE
TAMP2
DETECT
Unit Description
COM Common terminal
Z Zone terminal
TAMP1 Tamper switch
+ / - Battery slots
DETECT Reed switch
LED Light-emitting diode for indication of parameter restoring to default
RESET Button for restoring default parameters
TAMP2 Tamper switch
3. INSTALLATION
NOTE: Before installing the wireless device, we highly recommend to refer to RADIO SYSTEM INSTALLATION AND SIGNAL PENETRA-
TION manual located at www.eldes.lt/download
1. Remove the cover of EWD2 enclosure.
2 3
4
EWD2 Manual v1.6
3
3EN
Loading...