Eldes EPGM1 User Manual

EPGM1

HARDWIRED ZONE & PGM OUTPUT EXPANSION MODULE

User manual v1.5

Compatible with:

• ESIM264 v7.09.02 and up.

• ESIM364 all versions.

Main features:

• Hardwired zone expansion adding 16 additional zones per module.

• 2 PGM outputs per module for electrical appliance connection.

EPGM1 is a hardwired zone and PGM output expansion module intended for using with ELDES alarm systems. ESIM264 system supports 1 EPGM1 module, while ESIM364 - 2 EPGM1 modules.

NOTE: For complete information on device operation with ELDES alarm system, please refer to ELDES alarm system installation manual

located at www.eldes.lt/download

1. CONTENT OF PACK

1. EPGM1................................ ................................1

2. User manual........ ..............................................1

3. Resistors 5,6kΩ.............. ..................................16

4. Jumper........ ........................................................1

5. Plastic standos.................. ............................4

2. TECHNICAL SPECIFICATIONS

2.1 Electrical & Mechanical Characteristics

Power supply 10-24V 100mA max without auxiliary equipment.

Number of digital inputs 16

Nominal resistance 5,6kΩ

Number of PGM outputs 2

PGM output circuit

1 R

OUT

Open collector output. Output is pulled to COM when turned on.

Maximum commuting pgm output values 2 x 30V; 250 mA

AUX: auxiliary equipment power supply 13,8V 500 mA max

Dimensions 118x47x10mm (4.65x1.85x0.39in)

Range of operating temperatures -20...+55ºC (-4... +131ºF)

Humidity 0-90% RH @ 0... +40°C (0-90% RH @ +32... +104°F) (non-condensing)

2.2 LED and Pin Functionality

C2, C1 PGM output C1, C2 status – on/o

Z1 - Z16 Zone Z1 - Z16 state – alarm/restore

STATUS EPGM1 micro-controller status

A0 EPGM1 module address pins

A1 N/A

A2 N/A

2 EN

User manual EPGM1 v1.5

+ 4 hidden pages