Eldes EKB3W User Manual

EKB3W

WIRELESS LED KEYPAD

User manual v1.5

Compatible with:

• ESIM364 all versions.

• EPIR v05.06.02 and up + EWT2 v16.17 and up.

• EPIR2 all versions.

• EPIR3 all versions

Main features:

• Alarm system arming and disarming.

• Arming and disarming in Stay mode.

• System parameter conguration.

• PGM output control.

• Visual indication by LED indicators.

• Audio indication by built-in buzzer.

• Keypad partition switch.

EKB3W is a wireless LED keypad intended to use with ELDES alarm systems. The system conguration by EKB3W keypad is performed by
activating the Conguration Mode and entering the required parameters and values. It is possible to connect up to 4 EKB3W devices to ELDES
alarm system at a time. The maximum wireless connection range is 150m (492.13ft) (in open areas).

NOTE: For complete information on device operation with ELDES alarm system, please refer to ELDES alarm system installation manual

located at www.eldes.lt/download

1. CONTENT OF PACK

Item Quantity

1. EKB3W .......................................................... 1

2. User manual.................................................. 1

3. 5,6kΩ resistor ...............................................1

4. Screws .......................................................... 4

5. 1,5V Alkaline AAA type batteries ............ 3

2. TECHNICAL SPECIFICATIONS

2.1 Electrical and Mechanical Characteristics

Battery type ................................................................... 1,5V Alkaline AAA type LR03 (IEC) / 24A (ANSI/NEDA)

Number of batteries .....................................................3

Battery operation time.................................................~12 months*

Wireless band ................................................................. ISM868/ISM915

Range of operating temperatures .............................-30...+55 °C (-22... +131°F)

Humidity ......................................................................... 0-90% RH @ 0... +40°C (0-90% RH @ +32... +104°F) (non-condensing)

Dimensions ..................................................................... 140x100x18mm (5.51x3.94x0.71in)

Wireless communication range ..................................Up to 30m (98.43ft) in premises; up to 150m (492.13ft) in open areas

Compatible with alarm systems .................................ELDES Wireless

* This operating time may vary in dierence conditions.

2.2 LED Functionality

ARMED Steady ON - alarm system is armed / exit delay in progres; ashing - Conguration mode activated

READY Steady ON - system is ready – no violated zones and tampers

SYSTEM Steady ON - system faults; ashing - violated high-numbered zones

BYPS Steady ON - zone bypass mode

1-12 Steady ON - violated zone / ashing - violated tamper (only for EPIR/EPIR2/EPIR3)

2

2 EN

USER MANUAL EKB3W V1.5

2.3 Keys Functionality

[BYPS] Zone bypass mode

[CODE] System fault list / violated high-numbered zone indication / violated tamper indication (only for ESIM364) / violated high-

[*] 1st character for Conguration mode activation/deactivation command (for ESIM364 up to v02.06.20; EPIR all versions; EPIR2

numbered tamper indication (only for EPIR/EPIR2/EPIR3)

up to v1.01.08) / clear typed in characters / keypad partition switch (if enabled; only for ESIM364 up to v02.06.20)

[#] Conrm (enter) command

[0] ... [9] Command typing

[1]... [2] Keypad partition switch (for ESIM364 v02.07.00 and up)

[STAY] Manual system arming in Stay mode

[INST] 1st character for Conguration mode activation/deactivation command (for EPIR2 v1.01.11 and up; EPIR3 all versions;

ESIM364 v02.07.00 and up)

2.4 Main Unit & Connector Functionality

1

ARMED

READY

SYSTEM BYPS

1

2

3

4

5

6

A B

FRONT SIDE

7

8

9

10

11

12

1 2 3

4 5 6

8 9

7

0 #

*

STAY

BYPS

INST

CODE

2

+ -

+ -

BATTERY

BATTERY

BATTERY

BACK SIDE

+-

TAMPER

5,6 kOhm

Z1COM

TAMPER Tamper switch

+ / - Battery slots

USER MANUAL EKB3W V1.5

COM Common terminal

Z1 Security zone terminal

3

3EN