Elac S 507 OPERATING INSTRUCTIONS

ELAC

Concentro S 507

High-End
on
High Heels.

ELAC

Concentro S 507

Its exterior is a perfect symbiosis of the extravagant design of the Concentro and the
clean lines of the VELA Series. The trapezoid basic shape, wraparound baffl e and
gently angled cabinet combine to convey a natural, low-key appearance. The striking
bottom assembly achieves a ‘high-heel’ effect, imparting a sense of elegance and
stability. Incidentally, it also guarantees an exceptionally sound footing.

The innovative stepX-JET features a concentric chassis built around a new JET 5c
tweeter and a midrange driver with an aluminum membrane. A patented technology
uses exchangeable DCRs (Directivity Control Ring) to tailor the directional
characteristics in the mid-frequency range to conditions in the listening area. The
different DCRs (three aluminum DCRs are included as standard) are used to infl uence
the relationship between direct and diffuse sound in the listening area. Four powerful
side-fi ring long-throw woofers ensure effortless performance. The special ICD
confi guration (Impluse Compensated Design) guarantees contoured bass reproduction
free of any coloration due to unwanted mechanical vibrations. Put simply, the
Concentro S 507 will satisfy the most discerning listeners by reproducing audio signals
to perfection across the entire frequency spectrum and at all volumes.

Concentro is synonymous with the ultimate in
workmanship, design, and sound.
The Concentro S 507 retains all the features and
benefi ts of the larger Concentro loudspeakers but
creates its own unique visual impact.

ELAC Electroacustic GmbH - Fraunhoferstraße 16 - 24118 Kiel

www.elac.com

ELAC

Concentro S 507

TECHNICAL SPECIFICATIONS CONCENTRO S 507

Height 1220 mm with Spikes/ Washer

Width 270 mm with Spikes/ Washer

Depth 380 mm with Spikes/ Washer

Weight 37 kg

Type 4-Way, bass refl ex

Woofer 4 x 150 AS mm Ø cone

Low-Midrange 1 x 180 mm Ø, AS-XR cone

High-Midrange 1 x 50 | 130 mm Ø AL cone

Tweeter 1 x JET 5c

Crossover frequency 120 | 400 | 2600 Hz

Nominal power handling 240 W

Minimal impedance 3,0 Ω bei 360 Hz

Peak power handling 300 W

Frequency range
(IEC 268-5)

Sensitivity 88 dB / 2,83 V/m

Suitable for amplifi ers from ... to 4 – 8 Ω

Nominal impedance 4 Ω

Recommended amplifi er power 60 – 500 W/channel

Finishes Black High Gloss,

Accessories included in delivery Bi-Wiring-Set, Gloves,

24 – 50000 Hz

White High Gloss

Spike-Set, Washer

www.elac.com