EKWB EK-XRES Revo D5 Service Manual

2nd revision, Oct 25th 2016

EK-XRES Revo D5

USER GUIDE

INSTALLING THE XRES D5 (already done by EK)

EK-XRES D5

60x3mm sealing gasket (OR)

Pump
holder

D5 pump body
with motor

NU T M74

Screws M3x12

Rubber damper

/ 2 /

STEP 1

Install the EK-XRES Revo D5 onto the pump main motor
housing. Make sure you install EK provided 61x3mm o-ring
gasket! Reseat the gasket if needed. You can rotate the
pump and use it in any direction except upside-down to best
suit your installation.

STEP 2

Secure the pump on the EK-XRES Revo D5 using en­closed M74 Nut.

/ 3 /

ADDITIONAL DAMPER

Top pyramids must be facing UP

/ 4 /