EKWB EK-Quantum Reflection PC-O11D XL D5 PWM D-RGB Installation manual
EKQuantum
Reflection PC-O11D XL D5 PWM D-RGB
DISTRIBUTION PLATE
USER GUIDE
Before you start using this produc t please follow these basic guidelines:
Please carefully read the manual before beginning with the
installation process!
The EK Fittings require only a small amount of force to screw
them firmly in place since the liquid seal is ensured by the
rubber O-ring gaskets.
The use of corrosion inhibit ing coolants is always recommended
for any liquid cooling system. EKWB recommends any of the
EKCryofuel for worry-free usage.
TABLE OF CONTENT
BOX CONTENTS 4
PREPARING THE 011D XL CHASSIS 5
INSTALLING THE DISTRIBUTION PLATE IN THE 011D XL 7
RECOMMENDED DISTRIBUTION PLATE CONFIGURATIONS 9
CONNECTING THE D-RGB LED STRIP 11
CONNECTING THE PUMP 11
TESTING THE LOOP 12
SUPPORT AND SERVICE 13
SOCIAL MEDIA 13
- 3 -
BOX CONTENTS
Front mounting Bracket (1 pc) M3x6 DIN7380 (2 pcs)
M3x8 DIN7991 (5 pcs) M3 Nut (2 pcs)
EK-Quantum Reflection PC-O11D XL
D5 PWM D-RGB
Allen Key 2mm (1 pc) EK-Loop Multi Allen Key
- 4 -
Loading...