EKWB EK-Quantum Kinetic FLT D5 Body D-RGB, EK-Quantum Kinetic FLT DDC Body D-RGB Installation manual

EKQuantum
Kinetic FLT D5/DDC Body D-RGB

INSTALLATION MANUAL

Before you start using this produc t please follow these basic guidelines:

Please carefully read the manual before beginning with the
installation process!

The EK fittings require only a small amount of force to screw
them firmly in place since the liquid seal is ensured by the
rubber o-ring gaskets.

The use of corrosion inhibiting coolants is a lways recommende d
for any liquid cooling system. EKWB recommends any of the
EK-Cryofuel for worry-free usage.

There are many ways to install your EK-Quantum Volume/Kinetic FLT
D5/DDC Body as it utilizes a standard fan mounting hole pattern with
15mm spacing, the same as all EK radiators. The mounting holes have
standard M4 threads with maximum engagement of 10mm. Use of
longer screws or screws with incorrect threads such as those intended
for fans or radiators may damage your product!

- 2 -

TABLE OF CONTENT

D5 PUMP VERSION 4

ATTACH ING THE D5 PUMP O N TO THE R ESE RVOIR 4

DDC PUMP VERSION 5

ATTACH ING THE DDC PU MP ON TO T HE RESERVOIR 5

CONNECTING THE D-RGB LED STRIP 6
TESTING THE LOOP 7
SUPPORT AND SERVICE 8
SOCIAL MEDIA 8

- 3 -