EKWB EK-Quantum Volume FLT, EK-Quantum Kinetic FLT Installation manual

EKQuantum
Volume / Kinetic FLT

INSTALLATION MANUAL

Before you start using this product please follow these basic
guidelines:

Please carefully read the manual before beginning with the
installation process!

The EK fittings require only a small amount of force to screw
them firmly in place since the liquid seal is ensured by the
rubber o-ring gaskets.

The use of corrosion inhibiting coolants is a lways recommende d
for any liquid cooling system. EKWB recommends any of the
EK-Cryofuel for worry-free usage.

There are many ways to ins tall your EK-Quantum Volume/Kinetic FLT as
it utilizes a standard fan mounting hole pattern with 15mm spacing, the
same as all EK radiators. The mounting holes have standard M4 threads
with maximum engagement of 10mm. Use of longer screws or screws
with incorrect threads such as those intended for fans or radiators may
damage your product!

- 2 -

TABLE OF CONTENT

INSTALLING EK-QUANTUM VOLUME / KINETIC FLT DIRECTLY 5
INSTALLING EK-QUANTUM VOLUME / KINETIC FLT WITH SUPPLIED MOUNTS 6
INSTALLING EK-QUANTUM VOLUME / KINETICFLT RESERVOIR IN TO THE CASE 7
ATTACHING THE FITTINGS 9
CONNECTING THE D-RGB LED STRIP 10
TESTING THE LOOP 10
SUPPORT AND SERVICE 11
SOCIAL MEDIA 11

- 3 -

FLT Reservoir can be mount in multiple directions.
Vertically and horizontally position is optional.

Do not mount FLT Reservoir when the pump is in dead position.

- 4 -