Eizo DuraVision FDF2304W-P Setup Manual
中文
English Deutsch Français
Setup Manual
Important: Please read this Setup Manual, the Instruction Manual and the
Installation Manual carefully to familiarize yourself with safe and effective
usage. Please retain this manual for future reference.
• The latest manual is available for download from our web site:
http://www.eizoglobal.com
Einrichtungshandbuch
Wichtig: Lesen Sie dieses Einrichtungshandbuch, das Anleitung sowie das
Installationshandbuch aufmerksam durch, um sich mit dem sicheren und
efzienten Gebrauch vertraut zu machen. Bewahren Sie dieses
Handbuch zum späteren Nachschlagen auf.
• Die neueste Version des Handbuchs können Sie auf unserer Website
herunterladen: http://www.eizoglobal.com
Manuel de conguration
Important : Veuillez lire attentivement le présent manuel de conguration ainsi que le
Manuel d’instructions et le manuel d’installation an de vous familiariser
avec une utilisation sûre et efcace. Veuillez conserver ce manuel pour
référence ultérieure.
• Le manuel le plus récent peut être téléchargé sur notre site Web:
http://www.eizoglobal.com
设置手册
重要事项 : 请仔细阅读设置手册、说明手册及安装手册，以便您能了解安全及有效的
使用方法。请保留本手册，以备日后参考。
• 您可从我们的网 站上下载最新版的手册
: http://www.eizoglobal.com
Color LCD Monitor
1
English
Color LCD Monitor
SAFETY SYMBOLS
This manual and this product use the safety symbols below. They denote critical information. Please read
them carefully.
WARNING
Failure to abide by the information in a WARNING may result in serious injury and can be life
threatening.
CAUTION
Failure to abide by the information in a CAUTION may result in moderate injury and/or
property or product damage.
Indicates an attention to be required. For example, the symbol illustrates the hazard
type such as “ the risk of electric shock”.
Indicates a prohibited action. For example, the symbol illustrates a particular prohibited
action such as “Do not disassemble”.
Indicates a mandatory action that must be followed. For example, the symbol illustrates
the notication of general prohibition such as “Grounding the unit”.
About this manual
Setup Manual
(this manual)
Describes precautions and setup processes from network camera
connection to camera image display.
Instruction Manual
*1
Describes operation of network cameras and live image screen menus,
etc.
Installation Manual
*1
Describes network camera registration and function setup, monitor
system setup, etc.
*1 PDF le on the CD-ROM (Installation of Adobe Acrobat Reader is required.)
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.
EIZO Corporation is under no obligation to hold any submitted material or information condential unless
prior arrangements are made pursuant to EIZO Corporation's receipt of said information. Although every
effort has been made to ensure that this manual provides up-to-date information, please note that EIZO
monitor specications are subject to change without notice.
2
PRECAUTIONS
IMPORTANT
To ensure personal safety and proper maintenance, please read carefully this section and the caution
statements on the monitor.
Location of the Caution Statements
AVERTISSEMENT
WARNING
WARNUNG
WARNING
If the unit begins to emit smoke, smells like something is burning, or makes strange
noises, disconnect all power connections immediately and contact your local EIZO
representative for advice.
Attempting to use a malfunctioning unit may result in re, electric shock, or equipment damage.
Do not open the cabinet or modify the unit.
Opening the cabinet or modifying the unit may result in re, electric shock, or burn.
Refer all servicing to qualied service personnel.
Do not attempt to service this product yourself as opening or removing covers may result in
re, electric shock, or equipment damage.
Keep small objects or liquids away from the unit.
Small objects accidentally falling through the ventilation slots into the cabinet or spillage into
the cabinet may result in re, electric shock, or equipment damage. If an object or liquid falls/
spills into the cabinet, unplug the unit immediately. Have the unit checked by a qualied service
engineer before using it again.
Place the unit at the strong and stable place.
A unit placed on an inadequate surface may fall and result in injury or equipment damage. If
the unit falls, disconnect the power immediately and ask your local EIZO representative for
advice. Do not continue using a damaged unit. Using a damaged unit may result in re or
electric shock.
3
English
WARNING
Use the unit in an appropriate location.
Not doing so may result in re, electric shock, or equipment damage.
• Do not place outdoors.
• Do not place in a transportation system (ship, aircraft, train, automobile, etc.) where it may be
affected by strong vibration or shock.
• Do not place in a dusty or humid environment.
• Do not place in environments with corrosive gases (such as sulfur dioxide, hydrogen sulde,
nitrogen dioxide, chlorine, ammonia, and ozone).
• Do not place in environments with dust, components that accelerate corrosion in the
atmosphere (such as sodium chloride and sulfur), conductive metals, and so on.
• Do not place in a location where water is splashed on the screen (bathroom, kitchen, etc.).
• Do not place in a location where the steam comes directly on the screen.
• Do not place near heat generating devices or a humidier.
• Do not place in a location where the product is subject to direct sunlight.
• Do not place in an inammable gas environment.
To avoid danger of suffocation, keep the plastic packing bags away from babies and
children.
Use the enclosed power cord and connect to the standard power outlet of your country.
Be sure to remain within the rated voltage of the power cord. Not doing so may result in re or
electric shock.
Power supply: 100-120/200-240 Vac 50/60Hz
To disconnect the power cord, grasp the plug rmly and pull.
Tugging on the cord may damage and result in re or electric shock.
The equipment must be connected to a grounded main outlet.
Failure to do so may result in re or electric shock.
Use the correct voltage.
• The unit is designed for use with a specic voltage only. Connection to another voltage than
specied in this User’s Manual may cause re, electric shock, or equipment damage.
• Do not overload your power circuit, as this may result in re or electric shock.
Handle the power cord with care.
• Do not place the cord underneath the unit or other heavy objects.
• Do not pull on or tie the cord.
If the power cord becomes damaged, stop using it. Use of a damaged cord may result in re or
electric shock.
Never touch the plug and power cord if it begins to thunder.
Touching them may result in electric shock.
When attaching an arm stand, please refer to the user’s manual of the arm stand and
install the unit securely.
Otherwise, the unit may become detached, resulting in injury and/or equipment damage. If
the unit falls, please ask your local EIZO representative for advice. Do not continue using a
damaged unit. Using a damaged unit may result in re or electric shock. When reattaching the
tilt stand, please use the same screws and tighten them securely.
4
WARNING
Handle the batteries for the remote control with care.
Not doing so may result in battery explosion, liquid leakage, or burns.
• Do not disassemble, heat, short-circuit, or immerse the provided batteries in water.
• Install/change batteries in a correct way.
• When replacing batteries, use ones of the same type and model.
• When replacing batteries, replace all of them at the same time with new batteries of the
same brand and type.
• Insert batteries with correct direction of the plus (+) and minus (-) sides.
• Do not use the battery with coating damaged.
• Dispose of your battery in a designated disposal area.
Do not touch a damaged LCD panel directly with bare hands.
The liquid crystal that may leak from the panel is poisonous if it enters the eyes or mouth.
If any part of the skin or body comes in direct contact with the panel, please wash thoroughly.
If some physical symptoms result, please consult your doctor.
CAUTION
Handle with care when carrying the unit.
Disconnect the power cord and cables when moving the unit. Moving the unit with the cord
attached is dangerous. It may result in injury.
When carrying the unit, grasp and hold it rmly by the bottom as shown
in the illustration on the right.
Dropping the unit may result in injury or equipment damage.
Do not block the ventilation slots on the cabinet.
• Do not place any objects on the ventilation slots.
• Do not install the unit in a place with poor ventilation or inadequate space.
• Do not use the unit laid down or upside down.
Blocking the ventilation slots prevents proper airow and may result in re, electric shock, or
equipment damage.
Do not touch the plug with wet hands.
Doing so may result in electrical shock.
Use an easily accessible power outlet.
This will ensure that you can disconnect the power quickly in case of a problem.
Periodically clean the area around the plug.
Dust, water, or oil on the plug may result in re.
Unplug the unit before cleaning it.
Cleaning the unit while it is plugged into a power outlet may result in electric shock.
If you plan to leave the unit unused for an extended period, disconnect the power cord
from the wall socket after turning off the power for safety and power conservation.
5
English
CONTENTS
PRECAUTIONS ...................................................... 2
IM P O R TANT .............................................................. 2
CONTENTS ............................................................. 5
Package Contents ................................................. 6
Setup ...................................................................... 6
●
Setup Flow ...................................................... 6
●
Connect the network camera(s) ...................... 7
●
Prepare the remote control ............................. 8
●
Perform Easy Setup ........................................ 9
Reference ............................................................. 17
●
How to Attach the Optional Arm ....................17
●
Connecting HDMI Devices .............................18
●
Specications ................................................ 20
●
Display capability ...........................................21
●
Outside Dimensions .......................................21
6
Package Contents
Check that all the following items are included in the packaging box. If any items are missing or damaged,
contact your local EIZO representative.
Note
• Please keep the packaging box and materials for future movement or transport of the monitor.
• Monitor
• Power cord
• HDMI cable (HH200HS)
• Remote control
• AA batteries (2 pcs)
• Setup Manual (this manual)
• EIZO LCD Utility Disk (CD-ROM)
Setup
●
Setup Flow
The setup ow for displaying images of network cameras on the monitor is shown below.
For details of each process, refer to the corresponding pages.
Connect the network camera(s) (page 7)
Prepare the remote control (page 8)
Perform Easy Setup (page 9)
Set the following items using the setup wizard.
• Date and time on the monitor
• Monitor network information
• Automatic discovery of network cameras
• Display positions of camera images
Setup completed.
Images from the network camera(s) are displayed on the monitor.
Attention
• When using the Easy Setup function, only the network cameras installed in the same subnet as the monitor
are detected. If a network camera is installed in a different subnet, the camera must be registered manually
(For more information, refer to the Installation Manual (“Chapter2 Conguring from the Monitor Screen”)).
7
English
●
Connect the network camera(s)
Connect the network camera and the monitor according to the following procedure.
1.
Connect the network camera to the monitor via the network hub.
1. Connect the network cable (straight cable, Cat 5e or higher) to the monitor and the LAN port of the
network hub.
LAN
Network hub
*1
Network cable
(To 1000Base-T port)
*1 Use a hub compatible with 1000Base-T. For some network cameras, the hub must be compatible with
the PoE function. Check the network camera’s manual for information on the appropriate hub to use.
2. Connect the network camera to the network hub.
For connecting the network camera and the network hub, refer to the network camera’s manual.
Connection examples
Network camera
Network camera
Network hub
Note
• A maximum of 16 network cameras can be connected.
2.
Plug the power cord into a power outlet and the power connector on the
monitor.
To power outlet
Attention
• Do not bundle cables when wiring.
Loading...