Instructions
for
FXF11
FUMINATORTM
Fume Extractor Fan
Form.878
Rev C
Power Supply
Standard (U.S.A.)
-1 (No Transformer)
-100 (Japan)
-230 (Europe)
-230B (U.K.)
Solder not included
(Design, colors and materials subject to change without notice)
FXF11
exploded view
SR639
SR638
SR641
SR642
SR770
SR518
SR772
XF01
Filter Set
SR730
SR551
SR771
SR550
FXF10-1
PowerSupply
SR480
SR640
XF02
Primary Rotating Filter
The XF02 lter element rotates at the same
speed as the fan blades. Fumes and nail resi-
dues are evenly distributed.
XF02
Primary Rotating Filter
XF01 Filter Set with 1 - XF02
and 1 - XF03
XF02 Primary Rotating Filter
(set of 5)
XF03 Charcoal Impregna ted
Stationary Filter
(set of 5)
XF03
Charcoal Impregrated
Stationary Filter
power supply
SR571 for 100V (Japan)
SR538 for 115V (U.S.A.)
SR572 for 230V (Europe)
SR821 for 230B (U.K.)
(set of 5)
XF03
Charcoal Impregnated Stationary Filter
(set of 5)
FXF10-1
exploded view
2
1
3
2
4
Filter Replacement
1. Pull out dirty lter
from hub when fan
is off.
2. Replace with new
XF02 Primary
Rotating Filter
Green LED
(indicates air ow
towards fan)
5
Front View
(air input)
7
1. XF03 Charcoal Impregnated
Stationary Filter
2. SR489 Cage
3. SR474 Fan Motor
4. XF02 Primary Rotating Filter
5. SR502 Cap Nut
6. SR475 Circuit Board Assembly
6
7. SR501 Screw
Yellow LED
(indicates air ow
away from fan)
Rear View
(air output)
Universal 12VDC Input
Jack Type: J4 Female 2.1
mm x 5.5 mm. Recommended 12VDC, 500mA
Power Supply
Variable Positioning
when extracting residue from
the air.
The XF02 and XF03 lter elements can be
used separately. For maximum ltration, install
both lters.
For Removing Fumes
Position the FXF11 close to the working area
to extract residue from the air.
made in U.S.A.
•
Powerful 12V fan motor removes unwanted fumes, powder
features
residues and odors from the air
• Can be used to either lter or blow dry clients nails
• U l t r a-quiet opera t i o n
• R o t a t i n g f r o n t f i l t e r p r o v i d e s f i l t r a t i on e i g h t t i m e s
better t h a n a s t a t i o nary lter
• Bright front (green) and rear (yellow) LED’s to indicate power
and air ow direction
• Adjustable to almost any working angle
• Q u i c k l t e r re p l acement
• I n t e rnal safety g r i l l s
specications
Power
Requirements 1 2 V DC
patented
Overall
Dimension 5.5”W x 12”H x 5.5”D
140 mm x 305 mm x 140 mm
Weight 1.09 lbs (.49 k g )
Design, color and material subject to change
without notice
Loading...