Edsyn CL1481 User's Manual

Instructions

for

CL1481

LONER®

Constant Temperature Soldering Tool

(Not Temperature Controlled)

Product Features

Ÿ Economical soldering tool ideal for a wide variety of electronic tasks

Ÿ Lightweight slim handle with burn resistant cord

Ÿ Uses a wide variety of soldering tips

Ÿ Quick and easy tip change with stainless steel barrel

Ÿ Cushion grip handle with enclosed heating element for comfort and improved performance

Ÿ Designed and assembled in the USA

Ÿ UL and ESD Safe
Ÿ 90 day warranty

Tip Cleaning

1.13” (28.8mm)

1. Plug in tool and set to desired temperature. Blinking lamp means tool is ready.

2. TIN the tip with LT-1 and apply solder before soldering.

3. Do not rub, bend, or file tip.

4. Always clean the tip by wiping it against the saturated sponge.

5. Always RE-TIN the tip with LT-1 before and after use.

LT-1

Basic Soldering

1. Plug in tool and allow tool to heat up.

2. Pre-heat the area to be soldered. Approximately 2 seconds for component leads.

3. With the tip still in contact with the working area, apply solder on the working area.
(for solder, ask for SS652)

4. Always clean the tip by wiping it against a moist sponge or EA439 Dry Tip
Cleaner and always RE-TIN with the LT-1 Tip Tinner and Cleaner.

Desoldering

1. Melt solder in the area you want to desolder.

2. While keeping solder in a molten state, use a desoldering tool from Edsyn’s

SOLDAPULLT® line to extract the molten solder.

Changing Tip

Efficiency is greatly dependent on choosing the proper tip to meet each application.
To change tip:

1. MAKE SURE YOUR TOOL IS COOL!

2. Using a WT623 Tip Wrench, turn HC273 counter clockwise and remove.

3. Pull out tip from heater.

4. Insert new soldering tip into heater and install HC273 back on.

More Tips are available at our website (www.edsyn.com) or in our General Line Catalog.

Iron Plated for long life-Nickel and Chrome Plated for optimum heat transfer

Temperature Rated for Lead Free Process

Soldering Tips

Contact Edsyn for more tip selections

LT374 LONER Conical Soldering Tip

LT375 LONER Spade Soldering Tip

LT392LF LONER Conical Soldering Tip High

LT394 LONER Spade Soldering Tip .07” (1.8mm) .93” (23.6mm)

Width A

.03” (0.8mm) .48” (12.2mm)

.06” (1.5mm) .48” (12.2mm)

.02” (0.5mm)

Length B