Edimax Technology IC-7010PTn User Manual

1 2

ErP Announcement

Product: Internet Camera (IP Camera) Purpose: 24 hour surveillance and transfer of footage for safety and health

reasons as intented use.

Detailed description:

- Health purposes: Users can pass through the Internet (from anywhere) to control the product (IP Camera). It's intended to watch and listen to people who need to be cared for at home and automatically sends e-mails and phone alerts to warn observers and ask for their attention. The product also provides a record function to retain all images and voice information for the sake of reference.

- Safety purposes: Users can initiate a “motion detect” function to record and send e-mails to notify them when doors or windows are opened – potentially by unwarranted persons.

- General purposes: Record/monitor environment footage and sound and store them onto a hard disk as a record.

As we cannot predict when events of this nature may occur, we need for the product to remain active and alert at all times. If the product had to go into

“standby/off” mode, it would impact the effectiveness of recording and warning

functions resulting in users not getting the information they need.

Based on the ErP official journal of European Union

Directives 2009/125/CE of the European parliament and of the council of

21 October 2009 Article 15 sector 5 part (a) and (b) as below:

“Implementing measures shall have no significant negative impact on the

functionality of the product, from the perspective of the user.” “Health, safety and environment shall not be adversely affected.”

We announce that the product need not comply with the (EC) No 1275 Standby and on/off mode function of Implementing Measurement.

We will keep up to the newest Implementing Measurements in the future and make the necessary changes if it's related to this product.

Notice according to GNU/GPL-Version 2

This product includes software that is subject to the GNU/GPL-Version 2. You find the text of the license on the product cd/dvd. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source code. Please contact Edimax at: Edimax Technology co., Ltd, NO. 3, Wu-Chuan 3rd RD Wu-Ku-Industrial Park, Taipei Hsien, Taiwan. R.O.C., TEL : +886-2-77396888, FAX : +886-2-77396887, sales@edimax.com.tw

Copyright by Edimax Technology Co, LTD. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company.

This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Any software described in this manual is sold or licensed "as is". Should the programs prove defective following their purchase, the buyer (and not this company, its distributor, or its dealer) assumes the entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Further, this company reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes.

The product you have purchased and the setup screen may appear slightly different from those shown in this QIG. For more detailed information about this product, please refer to the User Manual on the CD-ROM. The software and specifications are subject to change without notice. Please visit our web site

product names mentioned in this manual are trademarks and/or registered trademarks of their respective holders.

Table of Contents

Chapter I: Familiar with your Internet IP Camera ............................................. 6

1.1 Package Contents .............................................................................. 6

1.2 Basic Introduction ............................................................................... 7

1.3 Product Highlights ............................................................................... 8

1.4 Familiar with Key Components ........................................................... 9

IC-7010PT: .............................................................................................. 11

IC-7010PTn: ........................................................................................... 12

IC-7010PoE: ................................ ........................................................... 13

1.5 Camera Installation ........................................................................... 17

1.6 Locate the IP Address of this IP Camera .......................................... 20

1.7 Using Camera Admin Software to Locate Camera ........................... 24

Chapter II: Using Web Management Interface ............................................... 36

2.1 Camera Settings ............................................................................... 36

2.2 Video................................................................................................. 40

2.2.1 MJPEG ................................................................................... 41

2.2.2 MPEG4 ................................................................................... 42

2.2.3 H.264 ...................................................................................... 43

2.2.4 OSD ............................................................................................... 44

2.2.5 Night Vision .................................................................................... 45

2.3 Pan and Tilt ....................................................................................... 46

2.3.1 Preset Points .......................................................................... 46

2.3.2 Guard Tour .............................................................................. 48

2.4 Network Settings ............................................................................... 51

2.4.1 LAN......................................................................................... 52

2.4.2 WLAN ..................................................................................... 55

2.4.3 Dynamic DNS ......................................................................... 58

2.4.4 UPnP ...................................................................................... 59

2.4.5 LoginFree ............................................................................... 61

2.4.6 RTSP ...................................................................................... 62

2.5 Motion Detection ................................................................ ............... 63

2.5.1 Motion Detection ..................................................................... 64

2.5.2 Motion Region ........................................................................ 66

2.6 System Info ....................................................................................... 73

2.6.1 Camera Information ................................................................ 74

2.6.2 Date / Time Setting ................................................................. 75

2.6.3 Schedule ........................................................................................ 77

2.6.4 Utilities .................................................................................... 79

2.6.5 Status...................................................................................... 81

2.6.6 System Log .................................................................................... 82

2.7 Account ............................................................................................. 83

2.7.1 Status...................................................................................... 86

2.7.2 Space Alarm ........................................................................... 87

2.7.3 File Management .................................................................... 89

Chapter III: Using Surveillance Software........................................................ 90

3-1 Installing IP Camera Surveillance Software ...................................... 90

3-2 Using IP camera surveillance software ............................................. 94

3-3 Configure IP camera surveillance software ...................................... 97

3-3-1 Configure cameras ................................................................. 97

3-3-2 General Settings .................................................................. 106

3-4 Change Display Layout .................................................................. 112

3-5 Full-screen mode ................................ ............................................ 115

3-6 Scan ............................................................................................... 116

3-7 Zoom-in / Zoom-out ........................................................................ 117

3-8 PTZ ................................................................................................. 118

3-9 Snapshot ........................................................................................ 119

3-10 Recording ..................................................................................... 120

3-11 Video Playback ............................................................................. 121

Chapter IV: How to View IP Camera over the Internet with iPhone .............. 122

Chapter V: Appendix .................................................................................... 129

5.1 Specification.................................................................................... 129

5.2 How to apply for a free DNS account in the http://www.dyndns.org 130

5.3 Troubleshooting .............................................................................. 133

Chapter I: Familiar with your Internet IP Camera

Item Name

Quantity

IP Camera

1 2 Antenna(IC-7010PTn only)

2 3 Power Adapter

1 4 Ethernet Cable

CD ROM (Including Manual/Utility/Multi-Language QIG)

1 6

Accessory kit

1 7 Quick Installation Guide

1 8 Mounting Kit

1.1 Package Contents

Thank you for purchasing this IP camera! Before you start to use this IP camera, please check the package contents. If anything is missing, please contact the dealer of purchase and return the package to claim for missing contents.

1.2 Basic Introduction

Thank you for purchasing this IP camera! This IP camera is an ideal product for all kinds of video surveillance purposes, like home/office safety, kid/pet monitoring, and remote video acquire etc. Edimax IC-7010 series is tailor made to stream live video over your network. You can view the IP camera's video from anywhere on your local computers or via the Internet. Besides, Edimax IC-7010 series features high quality and high frame rate video streaming through advanced video compression. In order to achieve the highest video quality, simply select H.264, MPEG4 or M-JPEG depending on your network settings.

Some people may concern that there will be some places which will not be covered by camera, but this problem is completely solved by this IP camera. With built-in pan-tilt function, you can point the camera to the position where you wish to look at with user interface. You can even define a preset path, and the camera will cruise along the path you defined.

If the environment is too dark, it‟s also not a problem. This camera equips 9 IR-LEDs and will illuminate automatically when the environment is too dark, and the image captured by this camera will still be clear.

You can discover more useful functions in next section!

1.3 Product Highlights

No pre-loaded software required - all you need is a browser like Internet

Explorer 6 (and above, with plugin installed).

With supplied video surveillance software, you can connect up to 16 video

cameras and view images captured by every camera at the same time.

Supports 3 video resolutions: MJPG and H.264 SXGA(1280 x 1024), VGA

(640 x 480), and QVGA (320 x 240); MPEG4 XGA (1024 x 768), VGA (640 x 480), and QVGA (320 x 240).

Anti-flicker function (eliminates flash caused by fluorescent lights, 50 /

60Hz selectable).

Video control functions, like brightness and zoom-in / zoom-out. Audio function, suitable for applications like video conference or

environment monitor.

Pan-tilt control. 9 automatically-controlled IR LEDs. Wired and wireless network (IC-7010PTn only, 802.11b / 802.11g /

802.11n) support

Wireless data encryption (WEP / WPA) Supports DHCP and PPPoE protocol, you can also assign a fixed IP

address to the camera also.

Supports Dynamic DNS (used to allocate the IP camera‟s Internet address,

when the ISP you‟re using does not assign you with a fixed Internet address).

Supports UPnP, Windows XP (and above) will discover this IP camera in

network neighbor automatically.

Send captured picture and video by Email or FTP when motion is

detected.

Configurable motion detection sensitivity (6 levels from most sensitive to

least sensitive).

Built-in real-time clock, date and time information will be recorded with

every captured picture / video clip (also supports auto time synchronization via network time protocol).

Upgradeable firmware - enjoy new functions without buying a new

camera!

Supports up to 16 users, and you can set different password to different

user.

Usage and event logging.

1.4 Familiar with Key Components

Item

Description

Power

When the camera is powered on and ready for access, this LED will light up.

Audio

Indicates Audio status

LAN

When the IP Camera is linked to a wired network, this LED will light up. The LED will flash while video is transmitted or received through a wired network.

ACT

(IC-7010

The LED will flash while data is transmitted.

Front View

Focus Ring

IR LED

Microphone

Wired & Wireless:

POE model:

Power LED Audio LED LAN LED WLAN LED

Power LED Audio LED ACT LED LAN LED

PoE

only)

Wireless (IC-7010

PT &

IC-7010

PTn

only)

When the IP Camera is linked to a wireless network, this LED will light up. The LED will flash while video is transmitted or received through a wireless network.

Focus

Ring

You can change the aim and focus of the camera by adjusting the camera head's aim and adjusting the focus ring. Simply point it in your direction of choice and rotate the focus ring to your preference.

IR LEDs

Lights up when environment is too dark

Microph

one

Collects audio

USB Port

Power Connector

SD Card Slot Ethernet Port

Audio Connector

Back View

IC-7010PT:

IC-7010PTn:

Antenna Base

Power Connector WPS Button

SD Card Slot

Audio Connector Ethernet Port

IC-7010PoE:

Item

Description

Power

Connector

Connects to 12V DC power adapter

SD Card Slot

Accepts SD / SD-HC memory card for image / video storage

USB Port*

(IC-7010PT

only)

Accepts USB WiFi adapter** to enable wireless

Audio

Connector

Connects to external speaker for audio output

Ethernet

Connector

Connect to your local area network

Antenna

Base

(IC-7010PTn

Connects to supplied antenna

Power Connector

SD Card Slot

Audio Connector

Ethernet Port

only)

WPS Button

(IC-7010PTn

only)

Press the WPS button (click) on the IP Cam and click on the Access Point that you want to wirelessly connect it to.

Note: The USB port only works with Edimax USB WiFi adapters. Note: Edimax EW-7711HPn, EW-7711UAn, EW-7711USN,

EW-7711UMn & EW-7711UTn

Item

Description

Reset

Button

Press the button with pen nib and hold for 5 seconds to reset the camera settings to factory default value.

Side View

Reset Button

Item

Description

Tripod

Connect

Connects to tripod to secure the camera when the camera is not put on a horizontal surface.

Bottom View

Tripod Connector

1.5 Camera Installation

Please follow the following instructions to set your IP camera up.

1. Unpack the product package and check if anything‟s missing.

2. Connect the Ethernet cable to your local area network, and connect the other end to the LAN jack of this IP camera.

3. Plug the power adapter to wall socket, and connect the power connector to the power jack located at the bottom of the IP camera.

4. Connect two antennas to the antenna bases, which is located at the back of this IP camera.

5. Place the camera at a secure place, and point the camera to the place you wish to monitor. If you wish to hang the camera on the ceiling or wall, please use the tripod connector (located at the bottom of the camera) to secure the camera.

6. Launch Internet Explorer on your computer, and following the instructions given in next section to set the IP camera.

1.6 Locate the IP Address of this IP Camera

Default IP address of this IP camera is 192.168.2.3. If you wish to assign another IP address to this IP camera, you have to log onto the web configuration interface of the camera first.

If the left three fields of the IP address of your computer is not 192.168.2, you‟ll have to change the IP address of your computer first:

1. Click „Start‟ -> „Control Panel‟

2. Double-click „Network Connections‟ icon.

3. Right-click „Local Area Connection‟, and click „Properties‟.

4. Select „Internet Protocol (TCP/IP)‟, then click „Properties‟.

5. In „IP address‟ field, please fill in any IP address begins with „192.168.2‟, and ends with a value greater than 2 and less than 254 (You can use the example in the picture „192.168.2.339‟). In Subnet mask field, please fill „255.255.255.0‟. Please keep all other fields empty, and click „OK‟.

If you changed the IP address of this IP camera and you forget it, there‟re 2 methods to recover it:

a. Press and hold the „Reset‟ button located at the bottom of this IP

camera, to clear all settings of the IP camera and reset the IP address back to 192.168.2.3. You‟ll lose all settings in the IP camera.

b. Ask network administrator to check the DHCP release table, if the

camera was set to obtain the IP address by DHCP, a new record will be added to DHCP release table on DHCP server when the IP camera is connected to the local area network.

1.7 Using Camera Admin Software to Locate Camera

If you can‟t connect to the camera by the instructions given in last chapter, you can use camera admin software to search the camera which is connected to your local area network. The admin software is also capable to locate multiple cameras on your local area network.

Please insert the user manual CD-ROM supplied in the product package, and the CD will automatically running the installation, if not please double-click „Setup_Admin_3.0.17‟ icon:

Then follow the following instructions to install and use camera admin software:

1. Click „Next‟ to start install camera admin software:

2. You can change the installation folder of camera setup software here, click

„Browse‟ to select an existing folder, or you can just click „Next‟ to use default installation folder:

3. If you wish to create desktop icon and / or quick launch icon for camera

admin software, please check corresponding box, and click „Next‟ to continue.

4. You‟ll see a brief of all options you selected, click „Install‟ to install camera

admin software now, or click „back‟ to back to previous steps to change settings.

5. When you see this message, the installation of camera admin software is

complete. If you wish to launch camera admin software now, keep „Launch IP Cam Admin Utility‟ box checked, and click „Finish‟ to close installation utility.

After the camera admin software is launched, all cameras found on your local area network will be displayed:

All camera-related information will be displayed here. If you wish to connect to certain camera by web browser, double-click the camera listed here.

The camera admin software also provides several functions:

Language change: This camera admin software supports 3 languages: English, Chinese, and Japanese. You can select the language you wish to use from language dropdown menu located at upper-right corner of camera admin software.

Search camera: Click this button to search all cameras on local area

network again.

Browse camera via web: Select a camera listed above first, and then

click this button to connect to the camera by web browser.

Configure camera: Click this button to configure camera‟s network

and security setting. You‟ll be prompted to input camera‟s password:

Input the password (default: 1234) and click OK to configure the camera‟s network and security setting:

In „Lan Setting‟ page, you can configure camera‟s network settings. Select „DHCP‟ to set the camera to obtain an IP address from DHCP server on local area network automatically, and select „Manual IP‟ to input the IP address information manually. Click „OK‟ to save settings.

In „Security‟ page, you can change the camera‟s name and password (user name is always „admin‟ and cannot be changed). You have to input the same password in both „New Password‟ and „Confirm Password‟ field, or you‟ll be prompted to input new password again. Click „OK‟ to save settings or click „Cancel‟ to discard changes.

+ 106 hidden pages