Edimax Technology IC-1520POE, IC-1520DP, IC-1520DPG User Manual
IC-1520DP / IC-1520DPg / IC-1520POE
Wire / Wireless / Power over Ethernet
Digital Pan/Tilt Internet Camera
Quick Installation Guide
Version: 1.0 (October, 2007)
Multi-Languages QIG on the CD
======================================================================
ý: Českého průvodce rychlou instalací naleznete na přiloženém CD s
ČČeesskký
ovladači
DDeeuuttsscchh:
EEssppaaññool
FFrraannççaaiiss:
IIttaalliiaannoo:
MMaaggyyaarr::
NNeeddeerrllaanndds
PPoollsskki
PPoorrttuugguuêês
РРууссссккиийй::
SSlloovveennsskkyy：
RRoommaannaa:
: Finden Sie bitte das deutsche S.A.L. beiliegend in der Treiber CD
l: Incluido en el CD el G.R.I. en Español.
: Veuillez trouver l’français G.I.R ci-joint dans le CD
: Incluso nel CD il Q.I.G. in Italiano.
A magyar telepítési útmutató megtalálható a mellékelt CD-n
s: De nederlandse Q.I.G. treft u aan op de bijgesloten CD
i: Skrócona instrukcja instalacji w języku polskim znajduje się na
załączonej płycie CD
s: Incluído no CD o G.I.R. em Portugues
Найдите Q.I.G. на pусскoм языке на приложеном CD
：Anglického sprievodcu rýchlou inštaláciou nájdete na priloženom CD
:Cd-ul cuprinde Ghid de instalare rapida in limba romana
s ovládačmi.
TTüürrkkççee:
: Ürün ile beraber gelen CD içinde Türkçe Hızlı Kurulum Kılavuzu'nu
bulabilirsiniz
Content
1. Check your package contents.........................................................................1
1.1. System Requirement............................................................................2
2. Hardware Installation .....................................................................................2
2.1. LED and Focusing ...............................................................................2
2.2. Installation Procedure ..........................................................................5
2.3. Locate the IP Address...........................................................................6
3. Web Management Interface..........................................................................10
4. Software Installation.....................................................................................13
4.1 Firmware Upgrade..................................................................................21
English
Copyright© by Edimax Technology Co, LTD. all rights reserved. No part of this
publication may be reproduced, transmitted, transcribed, stored in a retrieval system,
or translated into any language or computer language, in any form or by any means,
electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the
prior written permission of this Company .
This company makes no representations or warranties, either expressed or implied,
with respect to the contents hereof and specifically disclaims any warranties,
merchantability or fitness for any particular purpose. Any software described in this
manual is sold or licensed "as is". Should the programs prove defective following
their purchase, the buyer (and not this company, its distributor, or its dealer) assumes
the entire cost of all necessary servicing, repair, and any incidental or consequential
damages resulting from any defect in the software. Further, this company reserves
the right to revise this publication and to make changes from time to time in the
contents hereof without obligation to notify any person of such revision or
changes.
The product you have purchased and the setup screen may appear slightly different
from those shown in this QIG. For more detailed information about this product,
please refer to the User's Manual on the CD-ROM. The software and specifications
subject to change without notice. Please visit our web site www.edimax.com for the
update. All right reserved including all brand and product names mentioned in this
manual are trademarks and/or registered trademarks of their respective holders .
Linux Open Source Code
Certain Edimax products include software code developed by third parties,
including software code subject to the GNU General Public License ("GPL") or
GNU Lesser General Public License ("LGPL"). Please see the GNU
(www.gnu.org) and LPGL(www.gnu.org) Websites to view the terms of
eachlicense.
The GPL Code and LGPL Code used in Edimax products are distributed
without any warranty and are subject to the copyrights of their authors. For
details, see the GPL Code and LGPL Code licenses. You can download the
firmware-files at http://www.edimax.com under "Download" page.
Thank you for purchasing Edimax Internet IP camera! This IP camera is an ideal
product for all kinds of video-surveillance purposes, like home/office safety, kid/pet
monitoring, and remote video acquire etc. Unlink conventional close-circuit vide
camera, you’re not limited to the length of cable! Once this IP camera is connected to
Internet, you can receive video from anywhere in the world where Internet access is
available.
Some people may concern that there will be some places which will not be covered
by camera, but this problem is completely solved by this IP camera. With built-in
pan-tilt function, you can point the camera to the position where you wish to look at
with user interface. You can even define a preset path, and the camera will cruise
along the path you defined.
The quick installation for three models as follows：
IC-1520DP is a wire internet camera .
IC-1520DPg is a wireless internet camera.
IC-1520POE is a wire internet camera with power over Ethernet function .
1. Check your package contents
Thank you for purchasing Edimax IP camera! Before you start to use this IP camera,
please check the package contents. If anything is missing, please contact the dealer
of purchase and return the package to claim for missing contents.
One Internet Camera
One Power Adapter
One Camera Stand
One 100M Category 5 Ethernet Cable
One Quick Installation Guide
One CD (Including Manual/Utility/multi-languages QIG)
One Antenna( For IC-1520DPg Only)
If any of the above items are missing, please contact your supplier.
1
1.1. System Requirement
System requirement for PC, MAC or Notebook PC to access the Internet Camera
are:
OS System: Windows 98, ME, 2000, XP + SP2, Server 2003
CPU: Intel Pentium III 750MHz above or Intel Celeron 1GHz above
Memory Size: 128MB (256MB recommended)
VGA Card Resolution: 800 x 600 or above
2. Hardware Installation
2.1. LED and Focusing
The Camera head and its focus ring allow you to modify the aim and focus of the
Camera.
To adjust the Camera’s focus, rotate the dark focus ring.
There are three LEDs indicating the camera status and networking status.
LED
Status Description
Name
LAN
(IC-1520DPg only)
Off Network cable is disconnected
On Network cable is connected
Flash Transferring data via LAN port
Off No wireless LAN activity WLAN
On Transferring data via wireless LAN
Off Camera is not powered (camera off) Power
On Camera is correctly powered
(camera on)
2
y Power
When the camera is power on and ready for access, the LED will light.
y LAN
When the Internet Camera is linking to wired network, the LED is lighting. The
LED is flashing when video is transmitted or received through wired network.
y WLAN ( For IC-1520DPg only )
When the Internet Camera is linking to wireless network, the LED is lighting. The
LED is flashing when video is transmitted or received through wireless network.
Wireless SMA Connector
(IC-1520DPgl only)
LED Green:
LED Amber: WLAN
Activity
(IC-1520DPgl only)
LED Blue:
Power On
Focus Ring
Model name
3
The Camera features two ports and a Reset button.
y Antenna
Standard reverse SMA connector where any antennas with reverse SMA
connector can connect to the Internet Camera.
y Power
The Power jack is where you can connect the power adapter.
y LAN
The LAN jack is where you can connect the Ethernet network cable.
y Reset
1. If problems occur with your Internet Camera, press the reset button with a
pencil tip (for less than 2 seconds) and the Internet Camera will reboot itself
with your configurations.
2. If problems persist or you experience extreme problems or you forgot your
password, press the reset button for longer than 5 seconds. The Internet
Camera will reset itself to the factory default settings (warning: your original
configurations will be replaced with the factory default settings).
Power Jack
LAN Port
Reset Button
4
2.2. Installation Procedure
1. Unpack the Internet Camera package and verify that all the items listed in the
Chapter 1 are provided.
2. Connect the Internet Camera to your network by attached the network cable from
the switch/router to the LAN port of the Internet Camera.
3. Connect the power adapter to the Internet Camera and plug the power adapter to
power outlet. The Internet Camera will be powered on. When the Internet Camera
is ready, the Ready LED will light.
Note: It is highly recommended to use the power adapter shipped with the Internet
Camera, do NOT use any other power adapter from any sources.
5
Loading...