EdgeStar TWR181ES Guide

Door replacement for TWR181ES units

Occasionally the door for an EdgeStar TWR181ES wine cooler may get damaged in
shipping or become otherwise inoperable. In these situations, the door is easily
replaceable.

Tools and parts required:
1 flat head screwdriver
1 phillips head screwdriver
1 replacement door with LED already installed (supplied by EdgeStar or dealer)

Make sure the wine cooler is completely unpacked and on a level surface before
attempting this operation. Also make sure that the wine cooler is not plugged in. If you do
not feel comfortable making this adjustment yourself, consult a technician.

Step 1:

Insert the flat head screwdriver underneath the hinge cover and gently pry the edges of
the hinge cover up. Note- be careful not to scratch the finish of the wine cooler.

Step 2:

Once the hinge cover has been pried up somewhat, grasp it with your hand and lift it off.

Step 3:

Note that the wires are all different colored- and the wires connect “like color to like
color”.