Edge Lighting Flexible Connectors User Manual

1718 W. Fullerton Ave

Chicago, IL 60614

Tel: [phone]

Fax: [phone]

www.edgelighting.com

© 2012 Edge Lighting. All Rights Reserved.

[e-mail]

Installation Instructions for Flexible Connector

IMPORTANT INFORMATION

- These products are ETL Listed for indoor locations.

SAVE THESE INSTRUCTIONS!

Installing the Flexible Connector to Soft Strips

SS-CFX-_

904-SS-CFX-01

A

MALE END OF
THE FLEXIBLE
CONNECTOR

FEMALE END OF
THE FLEXIBLE
CONNECTOR

NOTE: The female end of the Flexible connector plugs into male

end of the Soft Strip and the male end plugs into female end of a
Soft Strip. Make sure this fits to the design before Installing the

FEMALE END OF

1

THE SOFT STRIP

Soft Strips and Flexible connector.

Simply connect the proper side of the Soft Strip to the

1:

Flexible connector. Refer to the installation provided to
the installation instruction provided with the Soft Strip to
complete the installation.

Installing the Flexible
Connector to Light Channel

1

MALE END OF
THE SOFT STRIP

B

LIGHT CHANNEL
POWER END CAP

MALE END OF

3

THE FLEXIBLE
CONNECTOR

POWER
END CAP

1

SCREW

NOTE: The female ends of the Flexible connector plug into male

end of the Light Channel and the male end plugs into female end
of a Light Channel. Make sure this fits to the design before
Installing the Light Channels and Flexible "T" connector.

1: For each Light Channel, remove the bottom two screws of
the end that is going to be connected to the Flexible
connector.

2: Place the Flexible connectors ends into the cord grips
(provided with the Light Channel).

3: Push the each Light Channel onto the one end of the Flexible
connector. Tighten the cord grip to the end of the Light
Channels with the two Phillips screws (provided with the cord
grips).

4: Refer to the installation instructions provided with the Light
Channel to complete installation.

SCREW

FEMALE END OF
THE FLEXIBLE

3

CONNECTOR

FLEXIBLE
CONNECTOR

LIGHT CHANNEL

CORD GRIP

CORD GRIP

2

1