GDI-EXPLR100
1 2
EcoXplorer
Models: GDI-EXPLR100...120
User Guide
Reproductor de sonido
Marca: ECOXGEAR
Modelo: GDI-EXPLR100...120
Batería: 12 V
---
2,3 Ah
Salida USB: 5 V
---
1,0 A
Entrada: 100 V~ – 240 V~ 50 Hz/60 Hz, 1,0 A 50 W
Para uso interior
País de origen: CHINA
IMPORTADOR: IMPORTADORA PRIMEX, S.A. DE C.V.
BLVD. MAGNOCENTRO No. 4 INT. N/A COL. SAN FERNANDO LA
HERRADURA DEL.HUIXQUILUCAN C.P. 52765 EDO. DE MÉXICO
3 4
EcoXplorer Layout
Control Panel
Rugged Carrying
Handle
Connect +
Power Ports
FRONT
BACK
RIGHT SIDE
LEFT SIDE
Bottle Opener
& Strap Hook
Built-In
Speakerphone
Mic Location
Subwoofer
Bottle Opener
& Strap Hook
Important: Maintaining Waterproofness
If the caps on the back panel are not properly closed, the unit is
NOT watertight.
Waterproof Caps
To close properly, turn the cap clockwise so the cap’s arrowpoint lines up
with the locked symbol .
To access the connections, turn the cap counterclockwise so the cap’s
arrow point lines up with the unlocked symbol , then pull the tab on
the cap to open.
Unlock
Lock
5 6
Connect + Power
In/Out Connections
Do NOT use these connections if they are wet.
Microphone Input: Dynamic microphone required. Port is ¼" (6.35 mm).
Auxiliary Input: This 3.5mm auxiliary jack can be used to connect a CD
player, MP3 player, etc.
USB Charging Port: Connect your device’s charge cable here. USB
charging only functions when the EcoXplorer’s power is turned on. USB
port rating is 5V, 1A.
Power
Do NOT plug unit into wall power outlet if power cable jack is wet.
Use Caution: 16V DC Power Input. Contact may cause electric shock and
injury if wet.
Insert the included 16V power adapter to charge the EcoXplorer.
The LED indicator above the Power Button will shine red when the
EcoXplorer is plugged into AC power. When fully charged, the LED Power
Indicator, and the 4 LED Battery Level Indicators next to the Power
Button, will shine green. It can take 3 to 5 hours to fully recharge the
battery from empty.
Notes:
· Fully charge prior to first use (3-5 hours).
· Fully charge prior to extended storage (3-5 hours).
· The EcoXplorer can be played while battery charges.
· Contact Grace Digital at www.gracesupport.com prior to attempting
to replace battery.
BACK
AUX JackUSB Jack
Microphone Jack Main Power Switch
Power Cable Jack
7 8
Display + Controls
TOP
1. Standby Power Button: Turns EcoXplorer On/Off. Main Power Switch (located
behind waterproof cap) must be set to ON for Standby Power function to operate.
2. Play/Pause/Answer: Press to play or pause a track and to answer mobile calls
from a paired Bluetooth device.
3. LED Battery Level Indicators: Each LED represents 25% of a full charge. Four
full LEDs indicate a full charge.
4. Track Buttons: Press these buttons to go to the previous/next track on a paired
Bluetooth device.
5. EcoConnect Button: If you have purchased a second EcoXplorer (or one other
ECOXGEAR speaker bearing the EcoConnect symbol), press and release this button
on both speakers to link them together and play in stereo. The LED Indicator above
the button will shine blue.
6. Bluetooth Button: When in Bluetooth mode, if the LED indicator above this
button is not slowly flashing blue, press this button to enter pairing mode. The
LED Bluetooth Indicator will shine solid blue when the EcoXplorer is paired to your
device. If your device is paired, press this button to disconnect. Press and hold this
button for 5 seconds to clear all pairing records.
7. Master Volume Control: Press to adjust the speaker’s main volume. Press and
hold to adjust the volume continually (volume levels are 0 to 15).
8. Microphone Volume Control: Press to adjust the microphone volume. Press
and hold to adjust the volume continually (volume levels are 0 to 8).
9. Tune Buttons: Press these buttons to tune in a radio station. To “seek” (jump
to the next available station), press and hold either button down for a few seconds
until it starts to seek a station.
10. AM/FM Presets: Store up to 6 of your favorite AM/FM radio stations and
quickly tune to a preset radio station. PRESS AND HOLD to program presets.
11. Source Button: Press this button to cycle through the following modes: BT
(Bluetooth), AUX, FM, and AM.
12. EcoTalk: This button activates your Voice Assistant (Siri and OK Google) on the
paired device.
13. LED Screen:
10
13
1
6
11 2
5
7
3
9
12
8
4
Indicates that the unit
has been turned On.
The EcoXplorer is in
FM mode.
The EcoXplorer is in
Bluetooth mode.
The EcoXplorer is in
AM mode.
The EcoXplorer is in
AUX mode.
Indicates the current AM
station of the EcoXplorer.
Indicates that the unit
has been turned Off.
Indicates the current FM
station of the EcoXplorer.
9 10
Operations
Power On/Off
Main Power Switch: The EcoXplorer has a separate Main Power Switch
and Standby Button . The switch MUST be set to the ON position
to power your EcoXplorer. Once the switch is set to ON, use the Standby
Button located on the top panel to turn the unit On/Off.
When not in use for extended periods, turn the Main Power Switch off to
preserve battery life.
Power On: Press briefly to power on the EcoXplorer. “Power on” voice
prompt will be heard.
Power Off: Press briefly to power off the EcoXplorer.
Pairing a Bluetooth Device
1. Turn on your Bluetooth device.
2. Turn on your EcoXplorer. It will announce, “Power on.” If already
powered on and not in Bluetooth mode, press SOURCE to cycle
through the modes until BT (Bluetooth) appears on the screen.
3. Navigate to your Bluetooth device’s setup screen, find ECOXGEAR
and connect. If the connection is successful, the LED Bluetooth
Indicator will be lit solid blue and your EcoXplorer will announce
“Connection successful.”
Notes:
· If the pairing is not complete within 5 minutes, the speaker will exit the
pairing mode. In this case, you need to repeat the pairing steps again.
· After the connection is successful, if you turn the speaker off and on
again, the speaker will reconnect to the last connected device
automatically. Also, the voice prompt, “Power on” followed by,
“Connection successful” will be heard.
· Press and hold for 5 seconds to clear all pairing records.
Adjust the Master Volume
1. Press VOLUME briefly to adjust the speaker volume.
2. Press and hold VOLUME to adjust the speaker volume
continuously (volume levels are 0 to 15).
a. Press briefly to increase one volume level. Press and hold to
keep increasing the volume until maximum volume level is reached.
b. Press briefly to decrease one volume level. Press and hold to
keep decreasing the volume until minimum volume level is reached.
Adjust the Microphone Volume
1. Press MIC VOLUME briefly to adjust the microphone volume.
2. Press and hold MIC VOLUME to adjust the microphone
volume continuously (volume levels are 0 to 8).
a. Press briefly to increase one volume level. Press and hold to
keep increasing the volume until maximum volume level is reached.
b. Press briefly to decrease one volume level. Press and hold to
keep decreasing the volume until minimum volume level is reached.
Notes:
· This function only adjusts the external microphone input jack.
· The internal microphone used for EcoTalk (the activation of voice
assistants, such as Siri and OK Google, on your device), and phone calls
is not independently adjustable from the Master Volume.
11 12
Source Button
Press SOURCE briefly to cycle through the following modes:
BT (Bluetooth), AUX, FM, AM.
Play Music (Bluetooth Mode)
After the EcoXplorer is connected to your Bluetooth device, press
briefly on the EcoXplorer to play, press again to pause.
Press briefly to play previous song. Press briefly to advance to
the next song.
Press VOLUME to adjust the volume.
Notes:
· Pair and connect your Bluetooth device with EcoXplorer before using
this feature.
· If a call is received when you are listening to music, the music will
pause automatically.
· You can also control Volume and Play / Pause music operations from
your Bluetooth enabled device.
Radio Listening (AM/FM Mode)
Press SOURCE briefly to switch to FM or AM. Press RADIO to
tune in a radio station. To “seek” (jump to the next available station),
press and hold either button down for a few seconds until it starts to seek
a station.
Press VOLUME to adjust the volume.
EcoTalk
Press the EcoTalk button to activate the voice assistant on your device
(Siri, OK Google, etc.). Once activated, the speakerphone mic on your
EcoXplorer will hear your voice commands and transfer them to the voice
assistant on your device.
Notes:
· Before using the EcoTalk function, your device must be connected to
the EcoXplorer via Bluetooth.
· Not all devices have voice assistant functionality; refer to your device
for details.
AM/FM Presets
Store a favorite radio station to quickly tune to a preset radio station.
There are 6 positions for AM stations and 6 positions for FM stations.
While listening to a station you want to store, press and hold a preset
button (P1~P6) to assign the current station to that preset number. The
LED screen will flash 2 times to indicate when a preset has been set.
If you want to listen to a stored preset, press a preset button (P1~P6) to
go to the stored radio station.
13 14
EcoConnect - Wireless Stereo
Connection of Two Speakers
When you have two EcoXplorer speakers and want to wirelessly pair them
for stereo sound, first follow the Pairing a Bluetooth Device instructions
to connect one EcoXplorer speaker to your Bluetooth device. Leave this
EcoXplorer speaker powered on and connected to your device.
Next, place the two EcoXplorer speakers next to each other and turn on
your second EcoXplorer speaker. Once the second speaker is powered on
(the Bluetooth light will be flashing), press the EcoConnect Button
on both of your EcoXplorer speakers. Wait a few seconds for the speakers
to wirelessly connect. Both speakers will announce “Connection
successful, speakers paired” and the LED EcoConnect Indicator on both
units will light up blue once the connection is completed.
Once the two EcoXplorer speakers are connected via EcoConnect, start
playing music from your device. Both connected EcoXplorer units will play
the music from you device.
The EcoConnect default has your speakers playing in stereo mode. If you
would like to change which speaker is left or right or if you want to set
each speaker to play in mono mode you can press and hold . Each
press and hold of will change the speaker from RIGHT / LEFT to
LEFT / RIGHT to MONO.
The EcoConnect connection between the two EcoXplorer speakers will
NOT automatically re-connect after the speakers are turned off. To
re-establish EcoConnect between the speakers, after power off, please
follow the above steps.
Notes:
· You can also pair the EcoXplorer with any other ECOXGEAR speaker
bearing the EcoConnect symbol .
· The EcoConnect functionality is only available while using Bluetooth as
your audio source at a maximum range of 30 feet between both of the
paired speakers.
· While pairing the two EcoXplorer speakers, make sure that the
speakers are within a few feet of each other.
15 16
Troubleshooting
The sound is distorted
Try lowering the volume control of your connected device or musical instrument.
Also, try to reduce the overall volume of the EcoXplorer.
Cannot pair with Bluetooth device
Make sure that your device is compatible with Bluetooth. Turn off your
EcoXplorer and Bluetooth device, then power on and reconnect. Make sure that
Bluetooth mode is selected on your EcoXplorer.
There is a high-pitched whistling noise when using microphone
This is probably feedback. Point the microphone away from the speaker.
There is poor AM/FM reception
To adjust AM/FM reception, rotate the unit and/or move entire product to a
different location.
Cannot play music from a flash drive
The USB port is only for charging USB devices. The EcoXplorer cannot play
music via the USB port.
Volume level is too low
Increase the volume on the EcoXplorer and / or increase the volume on your
Bluetooth device.
Battery not properly charging
Make sure that you are using the provided 16V, 1.5A charge cable and ensure
that the cord is properly plugged into the EcoXplorer and wall outlet. Allow up
to 5 hours to fully charge the EcoXplorer. Please do NOT attempt to fix your
EcoXplorer unit. Please contact our Customer Support at
support@gracedigital.com or call us at 866.446.0961.
Specifications
Unit Weight
10 pounds
Bluetooth Compliance
Bluetooth V 4.1
Bluetooth Frequency Band
2.402~2.480GHz ISM Spectrum
Modulation
GFSK, π/4-DQPSK, 8DPSK
Bluetooth Range
Up to 100 ft / 30m
Tweeter
2'' (50.8mm) tweeter
Passive Woofer
5'' (127mm) woofer
Woofer
5'' (127mm) full range woofer
Output Power
50 W (peak)
Power Source
12V, 2.3Ah SLA Battery
Power Input
16V, 1.5A
USB Output
5V, 1A
EcoConnect
TrueWireless Stereo (TWS)
EcoConnect Range
30 ft / 9.1 m between
left and right speaker
Compatibility
Mobile phone/device supporting
Bluetooth V1.1 (and above)
Radio Frequency Range
US: AM 520 - 1710 kHz,
FM 87.5 - 107.9 mHz
Storage Temperature
-40°F to 122°F / -40°C to 50°C
Operating Temperature
23°F to 95°F / -5°C to 35°C
Play Time
Up to 30 hours of play time,
approximately 10 hours of play time
at maximum volume
Charging Time
Approximately 5 hours
Waterproof / Dust Rating
IP67
Dimensions
10.5 in / 267 mm
13 in / 330 mm
7.5 in / 191 mm
17 18
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.) This device may not cause harmful interference, and
2.) This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE: To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with
minimum distance between 20cm the radiator to your body: Use only the supplied antenna. FCC ID: 2AAUI-GDIEXBLD801.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures: reorient or relocate the receiving antenna, increase the separation between the equipment
and receiver, connect the equipment into an outlet on a circuit different from that to which the receiver is connected, consult
the dealer or an experienced radio/TV technician for help.
RF WARNING STATEMENT:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure
condition without restriction.
IC STATEMENT:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
1.) This device may not cause interference, and
2.) This device must accept any interference, including interference that may cause undesired operation of the device.
PRODUCT USE AND PROTECTION:
Read and follow all instructions. Use only as intended.
The ECOXGEAR Bluetooth speaker is intended to be used indoors or outdoors and in land or water environments. The speaker
has been tested to IP67 waterproofing standards, which means the speaker can be submerged in up to 3 feet of water for 30
minutes without any damage. However, the speaker is NOT intended for constant underwater use.
Always make sure the cap(s) / cover(s) are clean, free from sand or debris, and correctly fitted. The speaker will only meet IP67
ratings if all rubber seals, gasket(s) and cover(s) / cap(s) are in place. If you notice a muffling of audio after submersion, gently
shake the unit to clear excess water. If your speaker is exposed to salt water, clean it thoroughly after use with fresh water.
The power cable and the unit with an improperly fitted cap are NOT waterproof.
To prevent fire or shock, do NOT attempt to charge this unit if it is wet or you suspect water has entered the unit. In this
situation, please return the unit to Grace Digital for a free assessment. If we have found that the unit has carried water, we will
repair or replace the unit free of charge.
SAFETY ADVISORY & WARNING:
Read and follow all instructions. Use only as intended.
CAUTION: Do NOT open to repair. A qualified technician must carry out repair work.
ATTENTION: Do NOT charge while the unit is wet. Towel dry the unit AND make sure all connections are dry
BEFORE plugging in the charging connector. Failure to do so may result in electrical damage to the unit and
may void the warranty.
WARNING: California Proposition 65 WARNING: This product may contain chemicals known to the State of California to
cause cancer, birth defects and other reproductive harm.
( www.oehha.ca.gov/prop65/prop65_list/Newlist.html )
WARNING: Danger of explosion if battery is incorrectly replaced.
CAUTION: The unit can be used with the main power cord disconnected, the unit is readily operable with the main power
cord disconnected.
ATTENTION: Do NOT dispose of in a landfill. Contact Grace Digital at www.gracesupport.com or a certified recycling agent to
dispose of the unit.
SAFETY:
This product has a limited life span of use and should be replaced when it shows obvious signs of wear.
Do not modify or remove any original component parts of the speaker. Doing so could cause damage to the unit, allowing
water to ingress. A unit with water ingress should not be charged due to potential risk of fire or shock.
Please exercise care and good judgment when using your ECOXGEAR speaker. Audio levels should be appropriate to your
environment, comply with all local regulations, and always ensure that you can hear and be aware of any potential hazards
around you.
You should always
1.) Use the ECOXGEAR speaker in accordance with any music or noise rules and regulations.
2.) Properly seal the ECOXGEAR prior and after each use when in humid or water environments to avoid water damage to the
internal components. Salt water / air is particularly corrosive. Always make sure that the gaskets are sealed when in a salt
water environment and that the unit is properly rinsed off after use.
3.) Properly clean the ECOXGEAR and ensure the gaskets have no sand, dirt, or water on them prior to storage.
4.) Store your unit with all caps properly sealed to avoid long term internal moisture damage inside your unit.
5.) Completely dry and clean your ECOXGEAR prior to attempting to charge the unit.
6.) Return the ECOXGEAR to Grace Digital if you suspect water ingress into the unit or if the unit has experienced a severe
impact that may have affected the integrity of the unit to take on water.
You should never
1.) Never charge your ECOXGEAR if you suspect water has entered the device. Charging a device with water inside could be
potentially hazardous and cause fire or a spark.
2.) Never use your ECOXGEAR if you have dropped it or thrown it against a hard surface which may have destroyed the
integrity of the speaker, housing, or gaskets. In the event of a severe impact to your unit, please return the unit to Grace
Digital to review for potential damage.
3.) Never open the auxiliary doors in a water environment. This could cause water to ingress into the unit which could
potentially be hazardous and cause a fire or a spark.
4.) Never connect a device to the auxiliary input jacks when in a water environment. The auxiliary jacks should only be used in
a dry environment.
5.) Never attempt to fix, repair your ECOXGEAR unit. Please send it back to Grace Digital for any assessments and repairs.
CARE, MAINTENANCE & PRECAUTIONS:
1.) The unit is waterproof only when the caps and door are properly closed.
2.) Close the caps and door properly before use. If the unit is placed in water without the caps or door properly closed, water
may enter into the unit and void your warranty.
3.) Dry unit completely before opening the caps or door. Do NOT open the caps or door if wet or in a wet environment.
4.) Do NOT apply excessive force to any surfaces of the unit when wet or in a wet environment.
5.) Do NOT use or store the unit in places with high temperature.
6.) AVOID prolonged exposure to ultraviolet radiation (UV sunlight) and strong magnetic fields.
7.) Periodically check the rubber seal on the caps and door for premature wear.
8.) Periodically clean the rubber with a soft moist cloth and ensure no objects such as dirt, hair, sand are on the rubber seal
ring. Do NOT use any oily solvent or chemicals for cleaning.
9.) Rinse off the unit with tap water after use in salt water or swimming pool.
10.) Power and / or charge the built-in rechargeable battery for portable use by connecting the provided 16V, 1.5A power supply
cable to an AC outlet.
11.) Noise and audio distortion may occur when the batteries are nearing end of charge.
12.) Do NOT remove the built-in battery. Do NOT remove the grill covers.
LIMITED MANUFACTURER’S WARRANTY:
EcoXplorer is covered by a 3 year limited warranty that covers defects in workmanship and / or materials for a period of 3
years from original purchase date. This warranty does not apply to any products which have been abused, neglected, modified
or used for a purpose other than the one for which they were manufactured. Please refer to the above care and maintenance
instructions for suggested care details. The warranty is valid only for the original owner who purchases the unit from an
authorized dealer. Transfers do not qualify for warranty protection. Grace Digital reserves the right to replace any out-of-stock
or discontinued product with a comparable product. Discontinued products may not be available for warranty replacement.
Any contents are NOT covered by the limited manufacturer’s warranty. Warranty terms may be revised without notification at
the discretion of the manufacturer. Please visit www.ecoxgear.com for additional product & warranty information.
EcoXplorer by ECOXGEAR, a division of Grace Digital Inc., San Diego, California.
Designed in California. Made in China.
Patents Pending.
Loading...