ECOXGEAR EGRX600, EGRX610 User Manual

ECOROX

Contol Buttons

& LED’s

Diagram 2

Diagram 1

ECOROX Control Buttons

Models: GDI-EGRX600--610 Features & Operation

LED Status Indicators:
POWER, BATTERY, Bluetooth

ON/OFF

Bluetooth

SPEAKER VOLUME TRACK SELECTION

PLAY PAUSE

ANSWER

BATTERY

INDICATOR

How to pair your Smartphone

with your ECOROX

ON/OFF

PRESS button

once to Power

ON / OFF

Green LED turns
ON & after a
few seconds
delay the unit
beeps to
indicate power
initiated and set
ON

Bluetooth

STEP 1. Find & enable

Bluetooth on your
Smartphone/
Smartdevice
STEP 2. PRESS button
once on ECOROX to
initiate Bluetooth
BLUE LED will blink
rapidly indicating ready
to pair.
STEP 3. Find
“ECOXGEAR” on your
Smartphone as a pairing
selection & select
“ECOXGEAR” to pair
with ECOROX
STEP 4. Select & play
your music!

SPEAKER VOLUME TRACK SELECTION

PRESS button to

decrease ( -) or
increase ( + )

SPEAKER VOLUME
NOTE: set your

SMARTPHONE to
maximum volume
level for best audio
performance

NOTE: 1 short beep
tone will sound when
max vol. setting is
reached on the
ECOROX

PRESS button to

select PREVIOUS
SONG track &
NEXT SONG track

PLAY PAUSE

ANSWER

PRESS button once

to PAUSE & PLAY a
song track and to

ANSWER Mobile
CALLS

(MUST be paired
with Bluetooth)
PRESS button to

answer incoming
calls from your
SMARTPHONE.
Listen to the caller
over ECOROX
speakers & talk
over the built-in

BATTERY

INDICATOR

Connect USB to

power source.
LED indicates
charging status.
RED: charge in
process
GREEN: full charge
complete

NOTE: LED will blink
2 times every 30
seconds to indicate
approximately 30
minutes of play
time remains

Microphone on the
front of the unit

USB & AUX

-

IN CONNECTIONS

Diagram 3

RUBBER CAP, USB POWER & AUX-IN CONNECTIONS

 Pull tab on the rubber cap to open the back panel

compartment for access to AUX-IN & USB CHARGING
connections

 AUX-IN can be used as an optional connection to play

an audio device using a 3.5mm audio cable
connection.

 Connect USB to computer or power outlet using a

USB to AC power adapter

USB CONNECTION & CHARGING

 Charge the built-in rechargeable battery via USB cord (included) connected to your computer OR via a USB-to-AC power adapter.
 When connected to a power source via the USB connection on the back panel, the Battery LED on the front panel (refer to

Diagram 2.) will indicate the power status. IF not connected to the charging cable, the LED will NOT indicate the power status.

 RED LED indicates charging is in progress. A GREEN LED indicates the battery is fully charged.
 The Power LED will flash 2 times quickly every 30 seconds when approx. 30 minutes of playtime remain.

NOTE: ECOROX can charge while playing audio