ECOXGEAR EGBT500, EGBT 501, EGBT 507 User Manual

USER GUIDE

Connect USB to power source.

GREEN: full charge complete

POWER ON / OFF

Press & release POWER button
1 time, wait approx. 3 seconds
for 1 short beep tone indicating
unit is powered ON

and select the option to “Search for a Device” to search for Bluetooth signal

Press & release Bluetooth PAIRING button on the ECOXBT top panel & wait

NOTE: The blue LED on the top panel will blink quickly & 2 short beep tones will indicate

Find your music section on your device, press PLAY & LISTEN to your music!

SPEAKER VOLUME

NOTE: 1 short beep tone will sound when
max vol. setting is reached on the ECOXBT

maximum speaker volume

ANSWER

CALLS

from your Smartphone.
Listen to the caller over
ECOXBT speakers & talk

FEATURES & OPERATION

Diagram 1. Top Panel, Buttons & Indicators

ECOXBT

Model no.: GDI-EGBT500/501/507

The ECOXBT by ECOXGEAR is a unique portable audio system combining Bluetooth, Lithium Ion Battery &
Waterproof Technologies. The result is a shock resistant, floating, waterproof, full range rechargeable wireless
speaker system. Do everything from stream & play your music from your Bluetooth enabled Smartphone or
audio device, to answering your calls over the built-in speaker phone!

BATTERY

INDICATOR

LED indicates charging status.
RED: charge in process

Press [ – ] to decrease volume,

Press [ + ] to increase volume

NOTE: ensure the volume setting on your
Smartphone is set at max level for

STEP 1. Find & enable the Bluetooth Section on your Smartphone /Audio Device

STEP 2.

STEP 3. Find ‘ECOXGEAR’ as a selection on your Smartphone /Audio Device

NOTE: 2 short, briefly separated beep tones will sound to indicate successful pairing

STEP 4.

PAIR /CONNECT with BLUETOOTH (required to PLAY your audio)

approx. 3 seconds for unit to search for your Smartphone /Audio Device’s

Bluetooth signal

the Bluetooth function has been selected & awaits pairing

Select ‘ECOXGEAR’ in order to pair with the ECOXBT unit

& the quick flashing blue LED on the top panel will turn solid blue

(MUST be paired with
Bluetooth)
Press the button to
answer incoming calls

over the built-in

Microphone (mic)

USER GUIDE

MICROPHONE (MIC) & SPEAKERPHONE SYSTEM

CAP, AUX-IN, CHARGING & USB CONNECTION

IF the CAP is off or not securely closed, the unit is NOT watertight. In order to ensure the unit

cannot be seen.

gray rubber gasket

back panel lines

Diagram 2. Back Panel Cap & Connections

NOTE: A removable LANYARD is included with the ECOXBT and is intended to assist in avoiding misplacing the

AUX-IN

CHARGING & USB CONNECTION

playing audio or unit may need to be restarted

The MIC is located on the bottom front left section of the front panel & is designed for use with the
Bluetooth speakerphone system. For best results, speak within 18” of the MIC during a call.

USB power & 3.5mm AUX-IN connections are under the CAP. Remove the CAP to access the connections.

IMPORTANT

is watertight the back panel CAP MUST be closed securely. To securely close the back panel CAP, the CAP
MUST be inserted so that the lines on the CAP align with the back panel lines and the top of the CAP is
pushed flush with the back surface of the unit so that the gray rubber gasket around the edge of the CAP

back panel CAP. Attach one end to the nylon tab on the CAP and the other end to the handle.

AUX-IN can be used as an optional connection to play an audio device using a 3.5mm audio cable connection.

 Charge the built-in rechargeable battery using the USB cord (included) connected to your computer OR

connected to the USB-to-AC power adapter (included) and a wall power outlet.

 When connected to a power source via the USB connection on the back panel, the Battery LED on the top

panel (refer to Diagram 1.) will indicate the power status. IF not connected, the LED will NOT indicate the
power status. A RED LED indicates charging is in progress. A GREEN LED indicates the battery is fully charged.

 The Power LED will flash 2 times quickly every 30 seconds when approx. 30 minutes of playtime remain.

NOTE: ECOXBT can charge while playing audio. Be sure to plug the USB into the desired power source prior to

SPECIFICATIONS

Output Power: RMS 6W (3 Watt x2 speakers /4 ohms) S/N Ratio: 88db +/- 3dB
Frequency Range: 135Hz-17,000Hz Unit Size: 2.8” x 9.0” x 4.0“
Power Source: Lithium Ion 3.7V 1800mAh Battery Unit Weight: 1.5lb Storage Battery
Playtime: 10 + hours from full charge Temperature: 14°F to 131°F
Charging Options: USB to AC adapter or Computer Operating Temperature: 23°F to 104°F
Charging Time: Approximately 2 ½ hours Waterproof Rating: IPX8