EcoxGear EcoPebble Powerbank GDI-EXPPB100, EcoPebble Powerbank GDI-EXPPB101 User Manual

Models: GDI-EXPPB100/101

User Guide

EcoPebble Powerbank

Quick Start

Bluetooth Speaker

Open Cap on the bottom of your
EcoPebble Powerbank

Turn on the Main Power Switch
Search your Bluetooth Connection on

your Smart Device
Pair & Play

USB Charging Ports

Charge Your Personal Device

Open Cap on the bottom of your
EcoPebble Powerbank

Connect the USB cable included with your
personal Smart Device to either of the
two USB OUTPUT Charging Ports (USB
OUTPUT 5V,2.1 A + 1 A) under the cap

Connect the USB cable from the
EcoPebble Powerbank to the USB port on
your personal Smart Device to start
charging your device(s)

NOTE: Should your device appear to NOT
be charging when connected with the USB
cable to your EcoPebble Powerbank, press the
Standby Button on the top of your EcoPebble
Powerbank to initiate charging.

Flashlight

Press & release the Flashlight Button on your
EcoPebble Powerbank for desired light level
or pattern setting:

• Press 1x for LOW

• Press 2x for HIGH

• Press 3x for STROBE

• Press 4x for SOS

1

1

4

3

3

2

2

AUX-IN

INPUTOUTPUT

ONOFF

OUTPUT

Main Power Switch &

USB Charging Ports

Flashlight

Button

Important: Maintaining Waterproofness

If the cap on the back panel is not properly
closed, the unit is NOT watertight. To ensure
the unit is watertight & waterproof, ALWAYS
CLOSE THE CAP PROPERLY. To do this,
confirm that the cap fits flat and flush
along the edges with the bottom panel.

Control Buttons & Operations

On/Off

Press & hold the
Standby Power
Button to power
ON/OFF.

IMPORTANT: Standby
Power function for
the Speaker will
NOT operate when
the Master Power is
set OFF. The Master
Power Switch is
under the cap on the
bottom panel of the
device and must be
set ON for Standby
& your EcoPebble
Powerbank Speaker
to operate.

The Flashlight operates
independent of the
Master Power Switch.

Bluetooth

When turned ON,
the EcoPebble
Powerbank will
power on and search
for your Bluetooth.
Refer to “Set Up
Recommendations
1-2-3” part for
details.

Track Selection

Press button once to
select Previous Song
track & Next
Song track .

Speaker Volume

Press to decrease
or to increase
Speaker Volume.

NOTE: Some
Bluetooth Smart
Devices may require
the volume to be
manually set on
the Smart Device
at maximum for
maximum audio level.

Your EcoPebble
Powerbank will beep
to indicate when
maximum volume
setting is reached.

Play/Pause/

Answer

Press button once to
pause & play song
tracks and to answer
mobile calls (MUST
be paired with
Bluetooth).

LED Battery
Indicator

There is one USB
INPUT under the cap
to connect and charge
your EcoPebble
Powerbank. Connect
the USB cable to the
micro USB INPUT
on the EcoPebble
Powerbank to an
external power source.

3