EcoxGear EcoLantern GDI-EXLTN400...420 User Manual

Page 1
Models: GDI-EXLTN400...420
User Guide
EcoLantern
Page 2
Quick Start: Speaker
Quick Start: Lantern
About EcoLantern
to turn on your EcoLantern Speaker Search your Bluetooth Connection on
your Smart Device Pair & Play
to turn on your EcoLantern Light Use Power , Mode , and
Brightness / Buttons to adjust light
1
1
2
2
3
3
4
4
5
The EcoLantern has a large variety of modes and brightness levels that ensure the EcoLantern is the perfect companion for all your adventures. The lantern light on the EcoLantern is controlled using the various control panel buttons. Once the Master Power Switch is turned ON, the control panel buttons can be used to turn on the light and change between the modes and brightness levels.
Page 3
MIC
LED Status Indicators
EcoConnect, Bluetooth, Battery Indicator
Control Buttons
Lantern, Speaker
Cap: Unlocked
Page 4
Control Buttons & Operations
Speaker On/Off
Press the Speaker Standby Power Button once to power On/Off.
IMPORTANT: Standby Power function will NOT operate when the Master Power Switch is set to OFF.
Bluetooth
When turned On, the EcoLantern will power on and search for your Bluetooth. Refer to Set Up Recommendations 1-2-3 part for details.
EcoConnect
Functionality is only available between two units. Refer to EcoConnect - Wireless
Stereo Connection of Two Speakers for details.
Speaker Volume
Press to decrease or to increase Speaker Volume.
NOTE: Some Bluetooth devices may require to be manually set for maximum audio level.
Your EcoLantern will beep to indicate when maximum or minimum volume setting is reached.
3
Track Selection
Press button once to select Previous Song track & Next Song track .
Play/Pause/Answer
Press button once to pause & play song tracks and to answer mobile calls (MUST be paired with Bluetooth).
PRESS AND HOLD for Voice Assistant (Siri & Google Assistant).
Lantern On/Off
Press the Lantern Standby Power Button once to cycle through four settings:
Mode 1: OFF Mode 2: 360° Mode 3: 180° - side 1 Mode 4: 180° - side 2
Lantern Mode
Press the Mode Button once to cycle through five modes:
Mode 1: Warm White Light Mode 2: Red Light Mode 3: Color Fade Mode 4: Music Sync Colors Mode 5: Emergency -
Flashing Red and White Lights
Page 5
Lantern Brightness
Press to decrease or to increase Lantern Brightness. Lantern Brightness ranges from 10% to 100%.
NOTE: Lantern Brightness only works in Warm White Light and Red Light modes.
Battery Indicator
There are four LED Battery Level Indicators. Each LED represents 25% of a charge. Four full LEDs indicate a full charge.
Connect USB to power source. The Battery Indicator LEDs will flash sequentially to indicate unit is being charged.
MIC
Charge Your EcoLantern
Before you power on your EcoLantern, connect the USB Micro port to the USB cable and a 5V power source to fully charge your EcoLantern for best performance.
NOTE: Before using your EcoLantern for the first time, charge the unit until all battery level indicators are solid BLUE, indicating a full charge.
Approximately 3 hours of charging is required from a low to a full charge.
Power source options include the USB connection to your computer or a power outlet using a 5V USB to AC power adapter. It is recommended to always use the USB cable and power adapter included with your EcoLantern.
Set Up Recommendations 1-2-3
1
Page 6
2
3
Power On, Battery, & LED Status Indicators
Once fully charged, press the Speaker or Lantern Standby Power Buttons / on the front of your EcoLantern. When powering on, you will see the battery indicator LEDs and, if the speaker is turned on, you will hear, “Speaker On, Ready to Connect.”
IMPORTANT: Make sure that the Master Power Switch, located in the back compartment under the cap, is set in the ON position. If the switch is in the OFF position, your EcoLantern will not be able to turn on using the Standby Power Button.
The LED battery level indicators are located on the front of the unit. Each bar represents 25% of a charge, with 4 full LEDs indicating a full charge.
Audio playback time over Bluetooth connection is approximately 20 hours at 75% volume. Light operating time is approximately 8 hours at 50% brightness.
Bluetooth Pairing & Your Audio
Connecting With Bluetooth: Connect To Your Smart Device & Play Audio
When the speaker is turned on, the blue LED light on the front panel will flash, indicating the unit is ready to pair.
Turn on Bluetooth on your Bluetooth device (Smart Device) and set the device in pairing mode. Available Bluetooth connections shall appear. Select the ECOXGEAR speaker from the list of discovered devices on your Bluetooth device. Wait for a few seconds until the connection is completed.
NOTE: Bluetooth connection feature is found in the Settings section of most mobile phones and other Bluetooth enabled devices.
When the ECOXGEAR selection is made and the Bluetooth connection is completed, your EcoLantern will announce: “Connection successful”
Once connected, select and play your desired audio.
Page 7
Pairing Mode: If the LED is not flashing or if you wish to place your EcoLantern in pairing mode, press and release the Bluetooth button on the front panel. Your EcoLantern shall announce “Ready to connect” when ready to pair to a new device.
NOTE: Your EcoLantern shall sync & wirelessly pair with most Bluetooth enabled devices. The unit remembers the last device paired and will automatically search for previous connections when the speaker is turned on or when a device comes back into Bluetooth range. If a connection is lost due to range, the speaker will look to re-establish that connection. If Bluetooth is turned off on your Smart Device, the EcoLantern may not automatically look for the device.
RECOMMENDATION: If you are not familiar with Bluetooth pairing for your Smartphone or other Smart Device, refer to the User Guide for your Smartphone to learn how to add and pair a new device (EcoLantern for instance) to your Smartphone using Bluetooth.
Bluetooth Pairing & Connections: Once paired, should you have an issue switching between Bluetooth connections between devices, open the Bluetooth Section within the device currently connected to the EcoLantern and delete the Bluetooth connection. The EcoLantern will then be available to pair & connect to an alternate Bluetooth enabled Smartphone / Audio Device.
When you have two EcoLantern speakers and want to wirelessly pair them for stereo sound, first follow the Bluetooth Pairing & Audio instructions to connect one EcoLantern speaker to your device. Leave this EcoLantern speaker powered on and connected to your device.
EcoConnect - Wireless Stereo Connection of Two Speakers
MIC MIC
Page 8
Next, turn on your second EcoLantern speaker. Once the second speaker is powered on (the Bluetooth light will be flashing), press and release the EcoConnect Button on both of your EcoLantern speakers. Both speakers will announce, “EcoConnect, pairing speakers.” Wait approximately 5 seconds for the speakers to wirelessly connect. When the two speakers are connected, one speaker
will announce, “Speakers Paired, Stereo Mode, Left Speaker,” the other will announce, “Right Speaker,” and the EcoConnect
light will turn solid BLUE on both units once the connection is completed.
Once the two EcoLantern speakers are connected via EcoConnect, start playing music from your device. Both
connected EcoLantern units will play the music from you device.
While the two speakers are connected and playing music from your device, PRESS AND HOLD to cycle through the three EcoConnect modes:
• Stereo: Left / Right
• Stereo: Right / Left
• Mono When switched to the Left / Right or Right / Left Modes, you
will hear one speaker announce, “Stereo Mode, Left Speaker,” and the other announce, “Right Speaker.” When switched to the Mono
Mode, both speakers will announce, “Mono Mode.”
The EcoConnect connection between the two EcoLantern speakers will NOT automatically re-connect after the speakers are turned off. To re-establish an EcoConnect connection between the speakers, after they are powered off, please follow the above steps.
NOTE: The EcoConnect feature works when paired to
another EcoConnect capable speaker with a distance of up to 30ft from each other. EcoConnect only works when using Bluetooth as your audio source.
Page 9
Important: Maintaining Waterproofness
If the cap on the back panel is not properly closed, the unit is NOT watertight.
To ensure the unit is watertight & waterproof,
ALWAYS CLOSE THE CAP PROPERLY.
Turn the cap to the RIGHT so the cap’s arrow point lines up with the locked symbol , along the back of the unit.
To access the connections, turn the cap to the LEFT so the cap’s arrow point lines up with unlocked symbol , on the
back of the unit. Use the finger tab to pull open the cap.
Select
Unlocked
Use Tab
to Open Cap
Access
Connections
Master Power Switch & Connections
1
AUDIO
AUX-IN
ONOFF
OUTPUT
INPUT
2
AUDIO
AUX-IN
ONOFF
OUTPUT
INPUT
3
Page 10
Master Power Switch
EcoLantern has a separate Master Power Switch and two Standby Power Buttons. The switch MUST be set to the ON position to power your EcoLantern. Once the switch is set to ON, use the Standby
Buttons / located on the front panel to turn the speaker or the light On/Off.
NOTE: When not in use for extended periods, turn the Master Power off to preserve battery life.
IMPORTANT: Standby Power function will NOT operate when the Master Power is set to OFF.
Audio AUX-IN
Connect an audio device using the 3.5mm cable connection as an alternative to a Bluetooth connection to your EcoLantern.
NOTE: Volume level must be controlled from the audio device when connected to the AUX-IN connection.
Input
Connect the USB cable to the USB micro Input to charge your EcoLantern.
RECOMMENDATION: Use the USB cable and power adapter included in the box.
Back Panel: Functions
NOTE: Charge time from low
to full charge is approximately 3 hours.
While playing audio or using the light, EcoLantern can be
charged or charge your device. Battery play time shall be reduced depending on the time and size of the device charging while connected to your EcoLantern.
CAUTION: Do NOT charge if unit and/or connections are wet or damp.
Output
Connect to the USB Output (5V, 2.1A) port to charge your personal device. Use the USB cable included with your personal device.
Charge time is approximately 1-2 hrs. from low to full for most
Smartphones; however, charge times will vary depending on the device being charged, the device’s battery specifications, and the device features.
In some instances your personal device may not indicate if charge is in process.
CAUTION: Do NOT charge if unit and/or connections are wet or damp.
Page 11
Unit Weight
1lb 11oz
Audio Output Power
RMS 5W
S/N Ratio
88dB +/- 3dB
Power Source
7.4V, 2200mAh Lithium Ion Battery
USB Input / Output
5V, 2A / 5V, 2.1A
Frequency Range
125Hz-18,000Hz
Bluetooth
Bluetooth® CSR 4.1 Up to 50 ft / 15 m
EcoConnect
TrueWireless Stereo (TWS) Up to 30 ft / 9.1 m between paired speakers
Unit Dimensions
Specifications
Bottle Opener (on Bottom)
Stainless steel
Play Time
20+ hours from full charge at 75% volume level
Charging Options
USB to 5V AC adapter or Computer
Charging Time
Approximately 3 hours
Recommended Storage (Battery) Temperature
-68°F to 77°F /-20°C to 25°C
Operating Temperature
23°F to 104°F / -5°C to 40°C
White Light Brightness
Up to 400 Lumens
White Color Temperature
4000 Kelvin
Lantern Battery Life
4hrs to 24hrs (depending on mode and brightness)
Brightness Levels
5 Levels (10%-100%) ­White and Red modes
Light Modes
White, Red, Color Fade, Music Sync Colors, Emergency
Waterproof/ Dustproof Rating
IP67
3.6”
3.6”
10.4”
MIC
Page 12
USB Cable
For Charging (Sold Separately)
USB Car Power Adapter (2A)
User Guide
Optional Accessories
EcoLantern Unit
AC Power Adapter
MIC
Models: GDI-EXLTN400...420
User Guide
EcoLantern
What’s in the Box
Page 13
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: reorient or relocate the receiving antenna, increase the separation between the equipment and receiver, connect the equipment into an outlet on a circuit different from that to which the receiver is connected, consult the dealer or an experienced radio/TV technician for help.
RF WARNING STATEMENT:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
IC STATEMENT:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
1) This device may not cause interference, and
2) This device must accept any interference, including interference that may cause undesired operation of the device.
PRODUCT USE AND PROTECTION:
Read and follow all instructions. Use only as intended.
The ECOXGEAR Bluetooth speaker is intended to be used indoors or outdoors and in land or water environments. The speaker has been tested to IP68 waterproofing standards, which means the speaker can be submerged in up to 6 feet of water for 30 minutes without any damage. However, the speaker is NOT intended for constant underwater use.
Always make sure the cap(s) / covers(s) are clean, free from sand or debris, and correctly fitted. The speaker will only meet IP68 ratings if all rubber seals, gasket(s), and cover(s) / cap(s) are in place. If you notice a muffling of audio after submersion, gently shake the unit to clear excess water. If your speaker is exposed to salt water, clean it thoroughly after use with fresh water.
The USB cables, power adapters, and unit with an improperly fitted cap are NOT waterproof. To prevent fire or shock, do NOT attempt to charge this unit if it is wet or you suspect
water has entered the unit. In this situation, please return the unit to Grace Digital for a free assessment. If we have found that the unit has carried water, we will repair or replace the unit free of charge.
Page 14
SAFETY ADVISORY & WARNING:
Read and follow all instructions. Use only as intended.
CAUTION: Do NOT open to repair. A qualified technician must carry out repair work. ATTENTION: Do NOT charge while the unit is wet. Towel dry the unit AND make sure all
connections are dry BEFORE plugging in the charging connector. Failure to do so may result in electrical damage to the unit and may void the warranty.
WARNING: This product may contain chemicals listed in Proposition 65 (www.oehha.ca.gov/prop65/prop65_list/Newlist.html)
WARNING: EcoLantern has a built-in Lithium battery. The battery must NOT be used in or near an open heat source or excessive heat.
WARNING: Danger of explosion if battery is incorrectly replaced. ATTENTION: Do NOT dispose of in a landfill. Contact Grace Digital at
www.gracesupport.com or a certified recycling agent to dispose of the unit. ATTENTION: AC adapter is a device forming a part of the main plug; therefore, an AC
adapter can always be readily disconnected from AC socket-outlet.
SAFETY:
This product has a limited life span of use and should be replaced when it shows obvious signs of wear.
Do not modify or remove any original component parts of the speaker. Doing so could cause damage to the unit allowing water to ingress. A unit with water ingress should not be charged due to potential risk of fire or shock.
Do not attempt to mount the unit except with the approved ECOXGEAR mounts. Doing so could cause damage to the unit allowing water to ingress. A unit with water ingress should not be charged due to potential risk of fire or shock.
Please exercise care and good judgment when using your ECOXGEAR speaker. Audio levels should be appropriate to your environment, comply with all local regulations, and always ensure that you can hear and be aware of any potential hazards around you.
You should always
1) Use the ECOXGEAR speaker in accordance with any music or noise rules and regulations.
2) Use the proper ECOXGEAR mounts if you intend to mount the unit.
3) Properly seal the ECOXGEAR prior and after each use when in humid or water environments to avoid water damage to the internal components. Salt water / air is particularly corrosive. Always make sure that the gaskets are sealed when in salt water environment and the unit properly rinsed off after use.
4) Properly clean the ECOXGEAR and ensure the gaskets have no sand, dirt, or water on them prior to storage or removing the back cover.
5) Store your unit with all caps properly sealed to avoid long term internal moisture damage inside your unit.
6) Completely dry and clean your ECOXGEAR prior to attempting to charge the unit.
7) Return the ECOXGEAR to Grace Digital if you suspect water ingress into the unit or if the unit has experienced a severe impact that may have affected the integrity of the unit to take on water.
You should never
1) Never charge your ECOXGEAR if you suspect water has entered the device. Charging a device with water inside could be potentially hazardous and cause fire or a spark.
2) Never use your ECOXGEAR if you have dropped it or thrown it against a hard surface which may have destroyed the integrity of the speakers, housings, or gaskets. In the event
Page 15
of a severe impact to your unit please return the unit to Grace Digital to review for potential damage.
3) Never open the auxiliary door in a water environment. This could cause water to ingress into the unit which could potentially be hazardous and cause a fire or a spark.
4) Never connect a device to the auxiliary input jack when in a water environment. The auxiliary jack should only be used in a dry environment.
5) Never attempt to fix, repair your ECOXGEAR unit. Please send it back to Grace Digital for any assessments and repairs.
CARE, MAINTENANCE, & PRECAUTIONS:
1) The unit is waterproof only when the cap is properly closed.
2) Close the cap properly before use. If the unit is placed in water without the cap properly closed, water may enter into the unit and void your warranty.
3) Dry unit completely before opening the cap. Do NOT open the cap if wet or in a wet environment.
4) Do NOT apply excessive force to any surfaces of the unit when wet or in a wet environment.
5) Do NOT use or store the unit in places with high temperature.
6) AVOID prolonged exposure to ultraviolet radiation (UV sunlight) and strong magnetic fields.
7) Periodically check the rubber seal for premature wear.
8) Periodically clean the rubber with a soft moist cloth and ensure no objects such as dirt, hair, or sand are on the rubber seal ring. Do NOT use any oily solvent or chemicals for cleaning.
9) Rinse off the unit with tap water after use in salt water or swimming pool.
10) Power and / or charge the built-in rechargeable battery for portable use by connecting the USB cord to a computer USB connection or to an AC outlet using the AC-to-USB cord 5V, 1A power adapter intended for use with the unit.
11) Noise and audio distortion may occur when the batteries are nearing end of charge.
12) Do NOT remove the built-in battery. Do NOT remove the grill covers.
LIMITED MANUFACTURER’S WARRANTY:
The EcoLantern is covered by a 3 year limited warranty that covers defects in workmanship and / or materials for a period of 3 years from original purchase date. This warranty does not apply to any products which have been abused, neglected, modified, or used for a purpose other than the one for which they were manufactured. Please refer to the above care and maintenance instructions for suggested care details. The warranty is valid only for the original owner who purchases the unit from an authorized dealer. Transfers do not qualify for warranty protection. Grace Digital reserves the right to replace any out-of­stock or discontinued product with a comparable product. Discontinued products may not be available for warranty replacement. Any contents are NOT covered by the limited manufacturer’s warranty. Warranty terms may be revised without notification at the discretion of the manufacturer. Please visit www.ecoxgear.com for additional product & warranty information.
EcoLantern by ECOXGEAR, a division of Grace Digital Inc., San Diego, California.
Designed and Engineered in the USA. Made in China.
Patent Pending.
Loading...