EcoxGear EcoDrift GDI-EXDRFT200, EcoDrift GDI-EXDRFT220 User Manual

EcoDrift

Models: GDI-EXDRFT200...220

User Guide

Quick Start

Open Cap on the side
of your EcoDrift

Turn on the Main
Power Switch

Press the Standby
Button to power on
your EcoDrift

Search your Bluetooth
Connection on your
Smart Device

Pair & Play

1

2

3

4

5

POWER + CONNECT

LED Status Indicators

Power, Battery Indicator,
Bluetooth, EcoConnect

Control Buttons

Battery Level Indicators

On/Off

Press the Standby Power Button
once to power On/Off.

IMPORTANT: Standby Power
function will NOT operate when
the Master Power is set OFF.
Master Power Switch under the
cap on the side panel must
be set ON for Standby & your
EcoDrift to operate.

Bluetooth

Once turned on, the EcoDrift will
search for your Bluetooth. Refer
to Set Up Recommendations

1-2-3 part for details.

EcoConnect

Functionality is only available
between two units. Refer to

EcoConnect - Wireless Stereo
Connection of Two Speakers

for details.

3

Control Buttons
& Operations

Speaker Volume

Press to decrease or to
increase Speaker Volume.

NOTE: Some Bluetooth devices
may require to be manually set
for maximum audio level.

Your EcoDrift will beep to
indicate when maximum
volume setting is reached.

Track Selection

Press button once to select
Previous Song track & Next
Song track .

Play/Pause/Answer

Press button once to pause &
play song tracks and to answer
mobile calls (MUST be paired
with Bluetooth).

EcoTalk

Press the EcoTalk button to
activate the voice assistant on
your device (Siri, OK Google,
etc.). Once activated, the
speakerphone mic on your
EcoDrift will hear your voice
commands and transfer
them to the voice assistant
on your device.

NOTE: Before using the EcoTalk
function, your device must be
connected to the EcoDrift via
Bluetooth. Not all devices have
voice assistant functionality;
refer to your device for details.

Battery Indicator

Connect USB to power source.
LED on the top panel indicates
USB connection charging status.

RED: charge in process
GREEN: full charge complete

NOTE: There also are four LED

Battery Level Indicators located
on the top of the unit. Each LED
represents 25% of a charge. Four
full LEDs indicate a full charge.

Set Up
Recommendations 1-2-3

Charge Your EcoDrift

Before you power on your
EcoDrift, connect the USB
Micro port to the USB cable
and a 5V power source to
fully charge your EcoDrift for
best performance.

NOTE: Before using your EcoDrift
for the first time, charge the unit
until all battery level indicators
are green, indicating a full charge.

Approximately 3 hours of
charging is required from a low to
a full charge.

Power source options include
the USB connection to your
computer or a power outlet
using a 5V USB to AC power
adapter. It is recommended
to always use the USB cable
included with your EcoDrift.

1

2

Power On, Battery, &
LED Status Indicators

Once fully charged, press the
Standby Power Button

on

the top of your EcoDrift. You
will see the green LED light
& you will hear, “Power on”
when powering on.

IMPORTANT: Make sure that the
Main Power Switch, located in
the back compartment under the
cap, is set in the ON position. If
the switch is in the OFF position,
your EcoDrift will not be able to
turn on using the Standby
Power Button.

The LED battery level indicators
are located on the top of the unit.
Each bar represents 25% of a
charge, with 4 full LEDs indicating
a full charge.

Audio playback time over
Bluetooth connection is
approximately 15 hours at
75% volume.

3

Bluetooth Pairing
& Your Audio

Connecting With
Bluetooth: Connect To Your
Smart Device & Play Audio

When your EcoDrift is turned on,
the blue LED light on the top
panel will flash, indicating the
unit is ready to pair.

Turn on Bluetooth on your
Bluetooth device (Smart Device)
and set the device in pairing
mode. Available Bluetooth
connections shall appear. Select
the ECOXGEAR speaker from
the list of discovered devices on
your Bluetooth device. Wait for a
few seconds until the connection
is completed.

NOTE: Bluetooth connection
feature is found in the Settings
section of most mobile
phones and other Bluetooth
enabled devices.