Echowell Elite T101, Elite T201 User Manual
INDEX
1.
USER MANUAL
2.
ECHOWELL T-101/T-201 PARTS
3.
INSTALLATION
How to wear the chest belt?
4.
KEY OPERATIONS
5.
TIME MODE CIRCULATION
6.
T-Z MODE CIRCULATIONEN
7.
DATE SETTING PROCESSES
8.
PULSPORTS FUNCTIONS
Watch Functions
Heart Rate Functions
9.
WATCH FUNCTION DESCRIPTIONS
Clock Mode
Countdown Timer Mode
Alarm Mode
Date Mode
Lap Mode (30Sets)
Lap Recall Mode (30Sets)
Chronometer Mode
..............................................................................1
...............................................................................3
........................................................................4
..........................................................................6
.................................................................6
...................................................................................7
.............................................................8
...................................................................................8
.....................................................................................9
.....................................................................9
.....................................................................9
..............................................2
......................................................3
.......................................................5
.....................................................5
...................................................5
.........................................................6
......................................7
.........................................................9
English
10.
HEART RATE FUNCTION DESCRIPTIONS
Start/Stop Heart Rate Measure Function
Start/Stop Heart Rate Data Record Function
Reset Heart Rate Record Data
Heart Rate Display Description
Newest Design:Change Display for BPM and %HR
Target Zone Mode
Stop-Watch Mode
Calories Mode
Exercise Time Mode
Weight Loss Mode
Fat Loss Mode
Maximum Mode
User Data Mode
Average Mode
11.
PRECAUTIONS
12.
SPECIFICATIONS
.......................................................................12
........................................................................13
..............................................................................13
...................................................................13
......................................................................13
.............................................................................13
...........................................................................13
...........................................................................14
..............................................................................14
.............................................................................15
........................................................................15
................................................11
................................................11
..........................11
..............................11
........................11
..........12
E-0
USER MANUAL
E-1
<
Y
Pulsports T-101/T-201
T-101/T-201 PARTS
our PULSPORTS consists of four parts:
1. ELASTIC STRAP
2. Cable Ties X 3
3. BRICKET FOR BICYCLE
4. T-101/ T-201 MAIN
5. TRANSMITTER
d
c
f
e
E-2
g
<
Pulsports T-101/T-201
INSTALLATION
How to wear the chest belt?
E-3
<
Pulsports T-101/T-201
1. Fasten the fastener at one end, put the chest belt on your chest
and loosen the stretch band. (Fig. 1, 2 and 3)
2. Adjust the length of the stretch band until you feel conformable, but
the stretch band must cling to the chest; then fasten the fastener
at the other end. (Fig. 4)
3. Adjust the sensor to the center of your chest and be sure the
backside of the sensor is clings to your chest and touches the skin.
(Fig. 5. 6)
4. The chest belt has to be worn while using the heart rate function.
The distance transmission should be less than 1 meter (3 feet).
5. Do not bend or fold the chest belt to preventing damage. (Fig. 7)
KEY OPERATION
Basic key operations
z SET Hold 2 seconds to enter data setting mode.
z T. MO D E Change watch function group.
z E.MODE Change pulse function group.
z ST/SP Start/Stop
z LAMP EL Light (light 3 seconds for each press).
z BEEP Hold 2 seconds to on/off chime and key beep.
z LAP Record Lap data.
z LAP_RECALL Record Lap data review.
Data setting key operations
z SET Press to quit data setting.
z T. MO D E Press to increase the value.
z E.MODE Press to change the setting value.
z ST/SP Press to decrease the value.
E-4
Hold to increase the value automatically.
Hold to decrease the value automatically.
Loading...