Page 1
uNLEASH THE PERFORMANCE AND POWER
5" PTO & Towable Chipper/Shredder!
Model SC5614 (71020) with optional
71125 vacuum hose and 71110
2-speed blower. The optional blower will
signicantly reduce your time on the job.
The model SC5540 (70554) with the
70487 one-speed blower attachment
makes chip placement easy.
Model SC5540 (70554)
Model Engine Size Chipper Chipper Weight 3 Point PTO Tires
(LxWxH) Capacity Shredder (Lbs.) Hitch
SC5540 PTO 42"x42"x48" 5" 4 chipper blades 450 Cat. 1 540 rpm
(70554) 36 shredding knives
SC5614 Honda 80"x46"x50" 5" 4 chipper blades 715 480/4000-8
(71020) 614cc 36 shredding knives pneumatic
Options:
70487 One Speed Blower with 4-Blade Radial Fan; 360 degree rotation of 4" Discharge tube; Adjustable cap
70649 Leaf Tamper
71110 Two Speed Blower with 8-Blade Radial Fan; 360 degree rotation of 6" Discharge tube; Adjustable cap
71125 Vacuum Hose Attachment; 8" Diameter; 20' Long, with Aluminum Handle
* 71125 Vacuum Hose Attachment works exclusively with 71110 2-speed blower. **Model 70554 - Tractor with 540 rpm PTO drive hp rating
Find a dealer near you!
Call us at 800.247.7335 or
Log onto www.BearCatProducts.com
P.O. Box 849, West Fargo, ND 58078
Email: sales@BearCatProducts.com
Fax: 701.282.9522
Page 2
5" PTO & Towable Chipper/Shredder Specs
Models SC5540 (70554), SC5614 (71020)
SHREDDING EFFICIENCY
36 serrated, free-swinging shredding knives are heat-treated
for strength and durability.
ROTOR
125 lbs. [57kg], dynamically balanced .75" [1.9cm] thick steel
face plate, 18" [45.7cm] in diameter, turning 2000 rpm's.
FOUR CHIPPING BLADES
•High chrome content reversible, heat-treated chipper steel
blades [3.125" x 2" x .25"] mounted 90 degrees to each
other for smoother operation, less vibration and longer blade
edge life.
•Quickly chip limbs up to 5" [12.7cm] in diameter.
MODEL SC5614 (71020) - HONDA 614CC ENGINE
•Road towable with 40.5" [103cm] wheel base with
480/400x8 pneumatic tires.
MODEL SC5540 (70554) - PTO DRIVEN
FUEL CAPACITY
SC5614 (71020) 614cc has 6.6 gallon [25 liter] separate fuel
tank.
SHREDDER AND CHIPPER
•Shredder Hopper is 30" x 20" [76cm x 51cm] with a 12" wide
throat.
•Chipper Capacity has 5" [12.7cm] for branches and limbs.
DIAMOND SHAPED CHIPPING CHUTE
•16" [40.6cm] long chute enables you to insert more irregular
limbs, even if they have some knobs on them.
•8" [20.3cm] from the bottom of the V to the top.
ADJUSTABLE AXLE MODEL SC5614 (71020)
Allows more weight on the tongue. Use when blower is attached.
WEIGHTS
•Model SC5614 (71020) - weighs 715 lbs. [324kg].
•Model SC5540 (70554) - PTO weighs 450 lbs. [204kg].
SAFETY
• Meets all applicable ANSI safety standards.
OPTIONS:
• 70487 - One Speed Blower with 4-blade radial fan
• 70649 - Leaf Tamper
• 71110 - Two Speed Blower with 8-blade radial fan
• 71125 - Vacuum Hose Attachment
HEAVY-DUTY, BUILT TO LAST
•Using 7 gauge (3/16" thick) [4.55mm] steel, 75" [1.9cm]
thick steel ywheel, discharge screen is .25" [6.35mm] thick
steel.
MANUAL BELT ENGAGEMENT - ON MODEL SC5614
(71020)
FEED OPENING
6.5" X 13.5" [16.5cm x 91.4cm]
Find a dealer near you!
Call us at 800.247.7335 or
Log onto www.BearCatProducts.com
P.O. Box 849, West Fargo, ND 58078
Email: sales@BearCatProducts.com
Fax: 701.282.9522
Loading...