Echo Bear Cat CHF9540HXE User Manual

WARNING

1

2

3

4

5

6

7

8

Instructions

SUBJECT: DISCHARGE PIN, KIT

# 70203-00

FITS MODELS: SC5540B/XE,

SC5720B/XE/XF, CH500H, CH5540/XE,

CH5653/XE, CH6730H/XE/XF CH800H,

CH8540H/XE, CH8720IH/XE/XF, CH8993H/

XE/XF, CH911DH/XE, CH922DH/XE,

CH9540H/XE, CHF9540H/XE

INSTALLATION

1. Discard the following parts (See figure 1.1):

Before inspecting or servicing any part of this machine,
shut off power source, and make sure all moving parts
have come to a complete stop.

figure 1.1

ITEM PART NUMBER DESCRIPTION OF DISCARDED PARTS

1 15154 BOLT, 5/16 X 2-1/2 HX CAP GR5 ZP

2 15250 WASHER, 5/16 FLAT ZP

3 15356 NUT, 5/16 NE NYLOCK ZP

4 15375 PIN, 1/8 X 1 ZP COTTER

5 16556 SPRING, LOCK COMPRESSION

6 71252 LEVER, DISCHARGE LOCK

7 71253 WELDMENT, DISCHARGE LOCK PIN

8 71256 TUBE, DISCHARGE LOCK PIVOT

2. Enlarge current pin hole to fit new 3/8" pin. Will need
to drill through the top and bottom of handle.
*Note: For 5" & 6" models, may need to remove
discharge chute and drill from the bottom up,
depending on drill.

3. Bolt lanyard with existing bolt directly under handle
(See figure 1.3).

Enlarged current

pin hole

***Optional: Add additional pin hole for pin storage while
rotating the discharge chute.

Drill hole, of same diameter, 1.5" from the original pin hole
(center to center).

figure 1.2

optional pin hole

PN 70201-00

Rev. 080114

1

figure 1.3

BLOWER DISCHARGE WELDMENT, KIT #70679-00 (SEE FIGURE 1.3)

ITEM PART NUMBER DESCRIPTION OF ITEMS INCLUDED IN KIT

1

30131-00 PIN, 3/8" X 4.25" DISCHARGE (INCLUDES LANYARD, PIN AND COTTER PIN)

2 36173-00 BAG, PLASTIC 16 X 10 X 4 MIL. (NOT SHOWN)

ECHO BEAR CAT

www.bearcatproducts.com

237 NW 12th Street, West Fargo, ND 58078-0849

Phone: [phone] • Toll Free: 888.625.4520 • Fax: [phone]

E-mail: [e-mail] • [e-mail]

PN 70201-00

Rev. 080114