Echo LS21 Instruction v.5

Instructions

SUBJECT: CRADLE KIT # 77189-00

FITS MODELS: LS21, LS22 & LS27

Before inspecting or servicing any part of this machine,
shut off power source, disconnect the battery cables,
and make sure all moving parts have come to a
complete stop.

WARNING

INSTALLATION:

Refer to parts list on reverse.

1. Slide cradle 77187-12 into position on the beam using the slots in the mounting
flanges of the cradle.

2. Slide cradle 77214-12 into position on the beam using the slots in the mounting
flanges of the cradle.

3. Secure the cradles to the frame of the machine and to each other at the cradle
flange locations with the supplied 3/8" inch bolts, washers and nuts, and tighten
securely.

5

2

Item 4; 77187-12 Cradle

Installed on engine side of machine

4

2

1

3

Item 5; 77214-12 Cradle

Installed on operator side of machine

Instruction Sheet

PN 77188-00

Rev.120112

NOTICE

Cradle Kit 77189-00 cannot be used in
conjunction with Engine Guard Kit 77558-00.

For log splitters serial number D00001 and above, it is necessary to remove the existing engine guard
plate before installing Cradle Kit 77189-00. The Cradle Kit replaces the need of the engine guard plate.

CRADLE KIT, PN 77189-00

ITEM PART NO. DESCRIPTION QTY.

1 15031

2 15364

3 15388

4 77187-12

5 77214-12

WASHER, 3/8 FLAT

BOLT, 3/8 X 1-1/4" HEX HD GR5 ZP

NUT, 3/8” NYLOCK

CRADLE

CRADLE

6

3

3

1

1

ECHO BEAR CAT

www.bearcatproducts.com

237 NW 12th Street, West Fargo, ND 58078-0849

Phone: [phone] • Toll Free: 888.645.4520 • Fax: [phone]

E-mail: [e-mail] • [e-mail]