Eagle OAC2436T-2 User Manual
Specification Sheet
Catalog Specification Sheet No.
Item No.:
Project No.:
S.I.S. No.:
Short Form Specifications
Eagle AdjusTable®Work Surface System with Cantilevered
Overhead System, model ______________. Heavy gauge
(brushed, electropolished) stainless steel top with choice of
base combination: one wire undershelf and one C-frame or
H-frame, or two C-frames or H-frames. Two 12˝-wide (chrome,
stainless steel) cantilevered overshelves. Two 33˝ front posts
and two 63˝ rear posts. Wire undershelves feature patented
QuadTruss
Options / Accessories
Drawers
Lock
Casters
®
design.
AdjusTable®with Cantilevered Overhead
System—shown with two C-frame bases
Utility drawers**
Keyboard stations**
Additional undershelves
AdjusTable®Work Surface System
with Cantilevered Overhead System
MODELS:
*2436T-2
*2448T-2
*2460T-2
* See chart on back page for complete model numbers.
• Stainless steel work surface available in solid or perforated,
with brushed or electropolished finish.
• All work surface tabletops feature hat channel underneath
for added strength.
• Two 33˝ (838mm) front posts.
• Two 63˝ (1600mm) rear posts.
• All posts are numbered in 1˝ (25mm) increments for flexible
and level position ing of the base that you choose. Available
in chrome or stainless steel finish.
• Two 12˝ (305mm)-wide chrome or stainless steel
cantilevered shelves mount to rear posts.
• Base combination available with or without wire undershelf,
with chrome or stainless steel H-frame(s) or C-frame(s).
• An almost unlimited num ber of custom configurations can
be created by adding undershelves.
1
• 34
⁄2˝ (876mm) working height.
*3036T-2
*3048T-2
*3060T-2
*3636T-2
*3648T-2
*3660T-2
EG04.04B
AdjusTable
®
Work Surface System with Cantilevered Overhead System
** See spec sheet #EG04.04A for these options.
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB®Division.
Phone: 302-653-3000 • Fax: 302-653-2065 • e-mail: quotes@eaglegrp.com
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2014 by the Eagle Group
EG04.04B Rev. 07/14
Item No.:
Project No.:
EG04.04B
S.I.S. No.:
AdjusTable®Work Surface System with Cantilevered Overhead System
To order, choose a work surface (Step 1), then choose a base combination (Step 2). Work surface of your choice is combined with two 33˝
(838mm) posts, two 63˝ (1600mm) posts, two 12˝ ((305mm)-wide cantilevered wire overshelves, and with the base combination of your choice.
Catalog Specification Sheet No.
FRONT VIEW SIDE VIEW
Step 1) Select work surface.
Choose from the following:
OAC Series – 16 gauge type 304 brushed stainless steel top with chrome base.
OAS Series – 16 gauge type 304 brushed stainless steel top with stainless steel base.
OAP* Series – 14 gauge type 304 brushed stainless steel top with
OAEP Series – Electropolished solid top with stainless steel base.
OAPEP* Series – Electropolished perforated top with stainless steel base.
OAC OAS OAP * OAEP OAPEP * width x length weight
Series Series Series Series Series in. mm lb. kg
OAC2436T-2 OAS2436T-2 OAP2436T-2 OAEP2436T-2 OAPEP2436T-2 24˝ x 36˝ 610 x 914 65 29.5
OAC2448T-2 OAS2448T-2 OAP2448T-2 OAEP2448T-2 OAPEP2448T-2 24˝ x 48˝ 610 x 1219 81 36.7
OAC2460T-2 OAS2460T-2 OAP2460T-2 OAEP2460T-2 OAPEP2460T-2 24˝ x 60˝ 610 x 1524 97 44.0
OAC3036T-2 OAS3036T-2 OAP3036T-2 OAEP3036T-2 OAPEP3036T-2 30˝ x 36˝ 762 x 914 75 34.0
OAC3048T-2 OAS3048T-2 OAP3048T-2 OAEP3048T-2 OAPEP3048T-2 30˝ x 48˝ 762 x 1219 94 42.6
OAC3060T-2 OAS3060T-2 OAP3060T-2 OAEP3060T-2 OAPEP3060T-2 30˝ x 60˝ 762 x 1524 113 51.3
OAC3636T-2 OAS3636T-2 OAP3636T-2 OAEP3636T-2 OAPEP3636T-2 36˝ x 36˝ 914 x 914 85 38.6
OAC3648T-2 OAS3648T-2 OAP3648T-2 OAEP3648T-2 OAPEP3648T-2 36˝ x 48˝ 914 x 1219 108 49.0
OAC3660T-2 OAS3660T-2 OAP3660T-2 OAEP3660T-2 OAPEP3660T-2 36˝ x 60˝ 914 x 1524 131 59.4
* Note: For perforated tops, laminar air flow is 23-25% depending on size.
3
Work Surface System with Cantilevered Overhead System
®
Step 2) Select base combination.
Must be specified with your choice of work surface. Choose from the following:
• Base with two C-frames.
• Base with two H-frames.
• Base with one C-frame and one wire shelf.
• Base with one H-frame and one wire shelf.
AdjusTable
⁄4˝ (19mm) perforations on 1˝ (25mm) centers with stainless steel base.
H-frame
TOP VIEWS
C-frame
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065 • www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
©2014 by Eagle Group
MHC/Retail Display Divisions: Phone 800-637-5100
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
Printed in U.S.A.
Rev. 07/14
Loading...