Eagle MMBB-10 User Manual

Specification Sheet

Catalog Specification Sheet No.

Item No.:

Project No.:

S.I.S. No.:

Short Form Specifications

Eagle Cantilever Shelving System to consist of 14 gauge
regular or NSF continuously seam-welded uprights, ceiling
brackets, and single- or double-knob brackets. For use with
either wire or solid shelving (sold separately). Heavy duty “C”
brackets available in grey epoxy, stainless steel, or aluminum
finish. Heavy duty crossbraces available in grey epoxy or
nickel finish.

single knob heavy duty

“C” bracket—shown with

wire shelf mounted

heavy-duty

back-to-back

upright

wall-mounted cantilevered

shelving shown with

wire shelving

Cantilevered Shelving System
—Heavy Duty Components

MODELS:

MMBC-K-*
MMNSBC-K-*
MMBCSS-K-*
MMNSBCSS-K-*
MMBC-K/A-*
MMNSBC-K/A-*

* See charts on back page for complete model numbers.

• Designed with convenience in mind.

• Requires no post supports to get in the way, making shelf
loading and unloading easier.

• For use with both wire and solid shelving.

• 100% usable shelving surface, from section to section, wall
to wall, and front to back — no posts to restrict stock
placement.

• Infinite height adjustability — no slots or keyholes to line up
for leveling, and shimming is eliminated.

• Wall-mounted shelving requires no support from the floor
— floor area is therefore open and easily maintained.

• Finishes available include grey epoxy, stainless steel, and
aluminum.

• Regular and NSF-approved components available.

• All components are made of heavy gauge material.

• Heavy-duty, rugged construction.

MMDBC-K-*
MMNSDBC-K-*
MMDBCSS-K-*
MMNSDBCSS-K-*
MMDBC-K/A-*
MMNSDBC-K/A-*

MMBB-*
MMNSBB-*
MMBBSS*
MMNSBBSS*
MMBB/A-*
MMXB-*
MMXB-N-*

EG01.45C

Cantilevered Shelving System—Heavy Duty Components

See Spec Sheet #EG01.45A for Uprights.
See Spec Sheet #EG01.45B for Brackets.

EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: [phone] • Fax: [phone]
www.eaglegrp.com

Foodservice Division: Phone [phone]
MHC/Retail Display Divisions: Phone [phone]

For custom configuration or fabrication needs, contact our SpecFAB®Division.

Phone: [phone] • Fax: [phone] • e-mail: [e-mail]

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2010 by the Eagle Group

EG01.45C Rev. 09/10

Item No.:

Project No.:

EG01.45C

S.I.S. No.:

Cantilevered Shelving System—Heavy Duty Components

HEAVY DUTY “C” BRACKETS

Heavy Duty Single Knob “C” Brackets

For dynamic loads. For use with wire or solid shelving. Available with flanges at top left or right. To order, add suffix

“-L” (left bracket) or “-R” (right bracket) to model number. Example: MMBC-K-18-L

GREY EPOXY STAINLESS STEEL ALUMINUM

GREY EPOXY STAINLESS STEEL ALUMINUM

4 1.8

MMDBCSS-K-18 MMNSDBCSS-K-18

4 1.8

MMDBCSS-K-21 MMNSDBCSS-K-21

5 2.3

MMDBCSS-K-24 MMNSDBCSS-K-24

3 1.4

MMDBC-K/A-18 MMNSDBC-K/A-18

4 1.8

MMDBC-K/A-21 MMNSDBC-K/A-21

4 1.8

MMDBC-K/A-24 MMNSDBC-K/A-24

Catalog Specification Sheet No.

length REGULAR NSF weight REGULAR NSF weight REGULAR NSF weight

in. mm model # model # lb. kg model # model # lb. kg model # model # lb. kg

18˝ 457 MMBC-K-18 MMNSBC-K-18 3 1.4 MMBCSS-K-18 MMNSBCSS-K-18 2 0.9 MMBC-K/A-18 MMNSBC-K/A-18 1 0.5
21˝ 533 MMBC-K-21 MMNSBC-K-21 3 1.4 MMBCSS-K-21 MMNSBCSS-K-21 3 1.4 MMBC-K/A-21 MMNSBC-K/A-21 1 0.5
24˝ 610 MMBC-K-24 MMNSBC-K-24 3 1.4 MMBCSS-K-24 MMNSBCSS-K-24 3 1.4 MMBC-K/A-24 MMNSBC-K/A-24 2 0.9

Heavy Duty Double Knob “C” Brackets

For dynamic loads. For use with wire or solid shelving. With flanges on top left and right, these brackets support two
adjoining shelves on a common upright.

length REGULAR NSF weight REGULAR NSF weight REGULAR NSF weight

in. mm model # model # lb. kg model # model # lb. kg model # model # lb. kg

18˝ 457
21˝ 533
24˝ 610

MMDBC-K-18 MMNSDBC-K-18
MMDBC-K-21 MMNSDBC-K-21
MMDBC-K-24 MMNSDBC-K-24

2 0.9
2 0.9
2 0.9

HEAVY DUTY UPRIGHTS

Back-to-back, floor-to-ceiling, double-faced unitized uprights. Available in grey epoxy, stainless steel, or aluminum
finish. Regular or NSF-approved.

GREY EPOXY STAINLESS STEEL ALUMINUM

height REGULAR NSF weight REGULAR NSF weight REGULAR weight

in. mm model # model # lb. kg model # model # lb. kg model # lb. kg

48˝ 1219 MMBB-4 MMNSBB-4 20 9.0 MMBBSS-4 MMNSBBSS-4 11 5.0 MMBB/A-4 14 6.4
60˝ 1524 MMBB-5 MMNSBB-5 25 11.3 MMBBSS-5 MMNSBBSS-5 24 10.9 MMBB/A-5 17 7.7
72˝ 1829 MMBB-6 MMNSBB-6 30 13.6 MMBBSS-6 MMNSBBSS-6 28 12.7 MMBB/A-6 21 9.5
84˝ 2134 MMBB-7 MMNSBB-7 35 15.9 MMBBSS-7 MMNSBBSS-7 33 15.0 MMBB/A-7 24 10.9

96˝ 2438 MMBB-8 MMNSBB-8 40 18.1 MMBBSS-8 MMNSBBSS-8 38 17.2 MMBB/A-8 28 12.7
108˝ 2743 MMBB-9 MMNSBB-9 45 20.4 MMBBSS-9 MMNSBBSS-9 42 19.1 MMBB/A-9 31 14.1
120˝ 3048 MMBB-10 MMNSBB-10 50 22.7 MMBBSS-10 MMNSBBSS-10 47 21.3 MMBB/A-10 34 15.4
144˝ 3658 MMBB-12 MMNSBB-12 60 27.2 MMBBSS-12 MMNSBBSS-12 57 25.9 MMBB/A-12 41 18.6

HEAVY DUTY CROSSBRACES

Cantilevered Shelving System—Heavy Duty Components

Adds to stability of unit. 1˝ (25mm)-wide 7-gauge steel.

fits crossbrace
shelf length length weight weight
in. mm in. mm model # lb. kg model # lb. kg

36˝ 914 48˝ 1219 MMXB-48 2 0.9 MMXB-N-48 2 0.9
48˝ 1219 60˝ 1524 MMXB-60 3 1.4 MMXB-N-60 3 1.4
60˝ 1524 72˝ 1829 MMXB-72 4 1.8 MMXB-N-72 4 1.8
72˝ 1829 84˝ 2134 MMXB-84 5 2.3 MMXB-N-84 5 2.3

GREY EPOXY NICKEL

EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: [phone] • Fax: [phone]
www.eaglegrp.com

Foodservice Division: Phone [phone]
MHC/Retail Display Divisions: Phone [phone]

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for

typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.

Printed in U.S.A.

©2010 by Eagle Group

Rev. 09/10