Eagle LSDSK, LSDSK-23 User Manual

Specification Sheet

Catalog Specification Sheet No.

Item No.:

Project No.:

S.I.S. No.:

Short Form Specifications

Eagle Floor-Trak

Shelving for Lifestor Polymer Shelving, with non-corrosive aluminum tracks with end stops. Each skate kit includes two skates which are aircraft quality aluminum, with stainless steel inserts and hardened steel ball bearings. One kit required for each mobile unit. Post Kits include four 16/304 stainless steel posts and hardware. System is ADA compliant.

Note: Floor-Trak

, skate kits, post kits, and shelving all need to

be ordered separately.

track

Floor-Trak®unit shown assembled

with LIFESTOR®starter unit**

** LIFESTOR®Polymer Shelving System sold

separately. For fur ther information about LIFESTOR®, consult spec sheets #EG01.12A and #EG01.12B.

skate

Options / Accessories

Bumper brackets Shim Kit (#912991) Foot Brake Kit (#MFBK-S)

end stop

Bumper Brackets available:

• Helps prevent shelf unit from tipping over due to uneven floor or due to unevenly distributed weight of shelf contents.

• Once installed, brackets hover over track of Floor-Trak contact with track unless shelf unit begins to tip over.

• Easily attaches to skate kit of any Floor-Trak of adjoining shelf unit.

• All-welded stainless steel construction, with heavy duty

system, but do not make

system, along with post

Floor-Trak®Systems—for use

with LIFESTOR

MODELS:

SDFT-* LSDSK-*

* See charts for complete model numbers.

• Floor-Trak™ system designed for use with LIFESTOR shelving units.

• Consolidates space.

• Low profile, non-corrosive track constructed of stainless steel and anodized aluminum.

• The system is ADA-compliant.

• Simple and easy to install.

• Easy to add on additional tracks and units.

• Open construction allows for the use of cart covers when required.

• Industrial-type, hardened steel bearings allow loaded units to glide effortlessly over the track.

LIFESTOR

• High-density polymer shelf sections are non-corrosive and dishwasher-safe.

• Shelf sections feature MICROGARD that retards the growth of bacteria, mold and mildew on shelf surfaces.

• Posts available in type 304 stainless steel or zinc with clear epoxy.

• LIFESTOR #EG01.12D.

⁄4˝ (6mm)-diameter rod.

TLEP63-S TLEP74-S

Shelving (sold separately)

shelving accessories available—see spec sheet

…sold as kits

for use with included model #

single-deep skate kits 4 SDSKATB-S

…sold individually (hardware included)

model # SKATB-S

Polymer Shelving

, an antimicrobial agent

# of

brackets

EG01.40

Floor-Trak

Systems—for use with LIFESTOR

Polymer Shelving

EAGLE GROUP

Certifications / Approvals

100 Industrial Boulevard, Clayton, DE 19938-8903 USA Phone: 302-653-3000 • Fax: 302-653-2065 www.eaglegrp.com

Foodservice Division: Phone 800-441-8440 MHC/Retail Display Divisions: Phone 800-637-5100

For custom configuration or fabrication needs, contact our SpecFAB®Division.

Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com

EG01.40 Rev. 05/10

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Item No.:

Project No.:

EG01.40

S.I.S. No.:

Floor-Trak®Systems—for use with LIFESTOR®Polymer Shelving*

LIFESTOR®Polymer Shelving System sold separately.)

skate

track

Catalog Specification Sheet No.

Polymer Shelving

Systems—for use with LIFESTOR

Floor-Trak

bearings

end stop

(Note: The tracks can be secured to the floor via supplied anchor bolts that run through each end stop.

Silicone should be applied after mounting tracks to the floor.)

dimensions of

floor track

Floor Track Kits

Each kit consists of a pair of aluminum tracks with end stops. All hardware and assembly instructions included. For tracks longer than 21´ (6401mm), order multiple tracks. Example: for 30´ (9144mm), use one 20´ (6096mm) track and one 10´ (3048mm) track.

model # in. mm lbs. kg

length weight

SDFT-6 6´ 1829 5 2.3 SDFT-7 7´ 2134 5 2.3 SDFT-8 8´ 2438 6 2.7 SDFT-9 9´ 2743 7 3.2 SDFT-10 10´ 3048 8 3.6 SDFT-11 11´ 3353 8 3.6 SDFT-12 12´ 3658 9 4.1 SDFT-13 13´ 3962 10 4.5

Skate Kits

Kit includes two skates and all necessary parts and hardware. Skates are aircraft-quality aluminum with stainless steel inserts and hardened steel ball bearings. One kit is required for each mobile unit. Shelves and posts sold separately.

Note: When assembling with shelf unit, add 1˝ (25mm) to width and length of shelf unit.

width weight

model # in. mm lbs. kg

LSDSK-18 18˝ 457 6 2.7 LSDSK-23 23˝ 584 7 3.2

model # in. mm lbs. kg

SDFT-14 14´ 4267 11 5.0 SDFT-15 15´ 4572 11 5.0 SDFT-16 16´ 4877 12 5.4 SDFT-17 17´ 5181 13 5.8 SDFT-18 18´ 5486 14 6.4 SDFT-19 19´ 5791 14 6.4 SDFT-20 20´ 6096 15 6.8 SDFT-21 21´ 6401 16 7.3

Post Kits for use with Floor-Trak®Skate Kits

Required for use with Skate Kits. Each kit includes four 16 gauge type 304 stainless steel posts and hardware.

model # in. mm lbs. kg

TLEP63-S 63˝ 1600 17 7.7 TLEP74-S 74˝ 1880 20 9.0

length weight

post

height weight

EAGLE GROUP 100 Industrial Boulevard, Clayton, DE 19938-8903 USA Phone: 302-653-3000 • Fax: 302-653-2065 www.eaglegrp.com

Foodservice Division: Phone 800-441-8440

MHC/Retail Display Divisions: Phone 800-637-5100

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for

typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.

Printed in U.S.A.

Rev. 05/10